Blastpipes instock!! 11/03/11 dont sleep, limited supply.. Order quick!

[A Spec Products]

What sup fellow board members!

Muffers are 1st come 1st serve bases: PAYPAL: [email protected] << DONT SLEEP!

Price is 190 Shipped, or picked up
Price in CA Shipped 210 Shipped
PM or Email me (tuan"at"aspecproducts.com) for international orders, but GOODLUCK cuz they will most-likey go quicker then I quote people.

*NOTE* Left side stagger people: 1st 10 people that paypal me, will be the ones forsure to get it, other will get there full refund. Sorry :(

------------------------------=^_^= IF YOU DONT READ ABOVE YOUR BAD! =^_^=------------------------------

Got a new shipment of GMP’s (Good Muffler Project), with a load of Blastpipes and L-Spec Mufflers:

Peep game:

http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/BlastpipeBanner.jpg
The Blastpipes:
http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/MU120.jpg (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/MU120.jpg)http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/MU120B.jpg (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/MU120B.jpg)
-Left Stagger Polish and Burnt Tip^^
(For left side of the car)
Price: 190 Shipped or Picked up
CA 210 Shipped


http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/MU119.jpg (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/MU119.jpg)http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/MU119B.jpg (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/MU119B.jpg)
-Right Stagger Polish and Burnt Tip^^
(For right side of the car)
Price: 190 Shipped or Picked up
CA 210 Shipped


http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/MU118.jpg (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/MU118.jpg)http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/MU118B.jpg (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/MU118B.jpg)
-Equal Length Polish and Burnt Tip^^
(For Left, Center, Right side of the card)
Price: 190 Shipped or Picked up
CA 210 Shipped


http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/LSpecBanner.jpg
The L-Spec:
http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/MU107B.jpg (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/MU107B.jpg)http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/MU108B.jpg (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/MU108B.jpg)
-L-Spec Both Angle Burnt and Straight Burnt^^
(For the people that don’t want sunk mufflers! Due to aggressive body kits!)
Price: 120 Shipped or Picked up
CA 132 Shipped

PM for any question, or shipping quotes other than Lower 49 States!

Thanks,
Tuan @ A Spec.

FAQ:

1. Whats the quality of the Mufflers?
-The Blastpipe - T-304 piping, Burnt Tip with Laser Engraved A Spec logo, Mandral bent pipes, and with and only 3' inlet, and two 3" outlets.

-L-Spec - T-304 piping and muffer, Burnt Tip with Laser Engraved A Spec logo, Straight through design, Stainless muffler core wrapped with stainless steel muffler pack and high temp resistance fiber glass, and with and only 3' inlet, and 4.25" outlets.

2. What do I need to fit this on my ride?
-Both mufflers are weld-on kits.
-Both also have brackets take you can weld on to, instead of the muffler itself; which causes the metal very weak and crack or snap off completely.
(Most universal muffers do NOT come with it, ours do!)
-For the people that have cat-back already, no worries I have flanges (http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/Flanges.jpg) you can use to weld and bolt on to your system now! add +$20ea!
-These muffers are all OFF-ROAD use only.

3. Are these instock?
- This is the most current mufflers I have instock. Please shoot me a PM any time!

4. When is this sale good until?
- Till the post is either 50+ pages long, or completely out of stock!

5. I know what the hell it is and I want it!
-You can order via confirmed Paypal: [email protected]
-Call me with Credit Card or Debt! 626-618-1100 x 110

Any other questions please contact me via PM, or contact via Phone my direct line is (626) 618-1100 x 110. We are also open from M-F 10-6 PST

Thanks guys!
Tuan @ A Spec

[c_mancuyas8]

Dammit Dammit Dammit! I just spent monies on ecu fml :/

[hOngsterr]

dont sleep, there should be 9 left burnt now :D

[Trinidrift3]

wait so is this n axle back bolt on, or just piping that needs to be welded on like a muffler? pics of the whole unit?

[A Spec Products]

wait so is this n axle back bolt on, or just piping that needs to be welded on like a muffler? pics of the whole unit?

2. What do I need to fit this on my ride?
-Both mufflers are weld-on kits.
-Both also have brackets take you can weld on to, instead of the muffler itself; which causes the metal very weak and crack or snap off completely.
(Most universal muffers do NOT come with it, ours do!)
-For the people that have cat-back already, no worries I have flanges you can use to weld and bolt on to your system now! add +$20ea!
-These muffers are all OFF-ROAD use only.

[c_mancuyas8]

paypal'd hopefully not to late :)

[A Spec Products]

Naw I got you.

You should have gotten it already.

Let me know,
Tuan @ A Spec.

[c_mancuyas8]

Yes sir I did and it looks awesome. Great quality piece! Cant wait to get it put on next weekend!

[A Spec Products]

Yes sir I did and it looks awesome. Great quality piece! Cant wait to get it put on next weekend!

Thanks sir! Feel free to throw up some pictures!

Thanks again,
Tuan @ A Spec.

[c_mancuyas8]

Will do! I hope to have it on tomorrow!

edit: heres some pics Im going to do it over the more I look at it i want the bend to be at the end of my bumper and stick out farther

http://farm8.staticflickr.com/7153/6498020373_e97bc0717e_z.jpg

http://farm8.staticflickr.com/7022/6498020457_6c2294d6bb_z.jpg

[A Spec Products]

Keep us posted.

Thanks again!
Tuan @ A Spec.

[SHIFT_destroy]

i have this matched up with an invidia n1 piping minus the muffler its super mean sounding on my rb but was obnoxious on my na ka

[juicyjay]

these still in stock???

[A Spec Products]

Plenty instock still.

Please let me know,
Tuan @ A Spec.

[A Spec Products]

I still have plenty instock..

Let me know guys!

Thanks again,
Tuan @ A Spec.

[pdaledk]

any side view of the tips ? are these the ones that are angle ?

[A Spec Products]

http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/customersrides/blastpipesize.jpg

http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/customersrides/brastpipe4.jpg

http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/customersrides/brastpipe5.jpg

http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/customersrides/brastpipe6.jpg

http://www.aspecproducts.com/forums/zilvia/ASpecMufflerPost/Normal/customersrides/brastpipe7.jpg

Yes sir they are angled.

Sizing above as well.

Thanks,
Tuan @ A Spec

[pdaledk]

Ok I'm sold !!! I will pick one up tomorrow !! Should I ask for you when I get there ? Or give you a call ?

[A Spec Products]

Just come in, ask for Tuan.

Thanks,
Tuan @ A Spec.

[speedracer5]

still have any or new

[A Spec Products]

I have a handful. Let me know anytime,

Tuan @ A Spec.

[A Spec Products]

UPDATE: 2/22/12

Blastpipes:
Left Stagger: 6
Left Stagger BURNT: 13
EQ Tip: 1
EQ Tip BURNT: 3
Right Stagger: 6
Right Stagger BURNT: 3

[speedracer5]

still got any of the left staggered burnt

[A Spec Products]

Yes I do. Also PM'd ya!

Tuan @ A Spec.

[SuperDown]

Sup man do you have left stagger non burnt blast pipes

[A Spec Products]

Yes we do still have 5 left.

Replied via PM.

Thanks,
Tuan @ A Spec.

[SuperDown]

Thank tuan after I picked up the aspec blast pipes yesterday I stopped bu that shop you suggested and got a quote. Ended up getting it put on they did good work and at a good price love how it all turned out ill post pics as soon as I can thanks again

[A Spec Products]

Thank tuan after I picked up the aspec blast pipes yesterday I stopped bu that shop you suggested and got a quote. Ended up getting it put on they did good work and at a good price love how it all turned out ill post pics as soon as I can thanks again

Sweet, hope you like it! Post away anytime!

Tuan @ A Spec

[JAAF]

Still have right staggered blast pipes?

[A Spec Products]

Yeah we ahve 6 Polish instock and 1 burnt tip instock.

Let me know!
Tuan @ A Spec.

[JAAF]

I would like to take that burnt tip one off your hands. Just so I get this right, this wld be for the passenger side of the car (fd rx7).
Whats the PayPal address?

[speedracer5]

its in the first pm guy ^^^^^^

[A Spec Products]

Replied via PM @ JAAF

Thanks,
Tuan @ A Spec.

[A Spec Products]

Got more Left Side staggered in. BURNT TIP!

Let me know,
Tuan @ A Spec.