Drift Freaq engine mount users come in!

[Driftingcorners]

Just dropped in the SR and I'm using Drift Freaq's mounts. Are most of you guys running a heat shield? What heat shield did you guys use and where was it placed?

While searching ebay found this: AP EXHAUST 9206 Exhaust Heat Shield | eBay (http://www.ebay.com/itm/AP-EXHAUST-9206-Exhaust-Heat-Shield-/170671875428?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3A240SX&vxp=mtr&hash=item27bcd62564#ht_1008wt_931)

not sure if that is remotely anything I'm looking for...

Please chime in, don't wanna burn up these mounts lol

[Irresistible]

You could just buy heat wrap.

[unreal-]

Use oem shield.

[[email protected]]

im going to use heat wrapping tape.

[chris_240sx]

I'm still using my oem heat shield, it's not enough. One day I'll get some heat tape or something for it.

[HPKMotorsports3]

im not using anything... theyre still fine and unaffected and its been almost a year... great mounts just wished he made trans mounts as well

[chris_240sx]

^ Are you running a NA motor?
Mine have been on just over a year and the mount on the turbo side is a little messed up from the heat. Nothing major, I just need to do something about it.

[drift freaq]

^ Are you running a NA motor?
Mine have been on just over a year and the mount on the turbo side is a little messed up from the heat. Nothing major, I just need to do something about it.

Ya I do recommend you do. Heat does affect Polyurethane. I recommend using a stock heat shield at minimum on NA its fine, If you are running a turbo then heat wrap is what a lot of people have done.

I have considered making a heat shield for the mounts again. Though if I did it would probably raise the price up around $10 . I am not sure I want to do that at this time given the current state of the economy.

On the trans mount, I won't lie it would not be cheap and there are people making trans mounts for a price that I could not beat.
Now lots of people have expressed interest but that does not always translate to sales. Given that, its hard to commit to making a trans mount.
Especially when I would have to sell them at a premium price.

[chris_240sx]

Ya I do recommend you do. Heat does affect Polyurethane. I recommend using a stock heat shield at minimum on NA its fine, If you are running a turbo then heat wrap is what a lot of people have done.

Yup, you warned me back when I bought them. Honestly I've just been lazy/forgetful and haven't gotten around to wrapping them yet. I do like them though, I bought both the motor mounts and a nismo tranny mount from you and I'm happy.

[HPKMotorsports3]

^ Are you running a NA motor?
Mine have been on just over a year and the mount on the turbo side is a little messed up from the heat. Nothing major, I just need to do something about it.

SR20DET Redtop