LOTS of SR/KA TOMEI SARD AEM TRUST OEM 240SX Parts

[besTint]

All aftermarket parts are in great to almost new condition, mostly under 500 miles. OEM parts are old as most SR's/240's. I don't sell junk, all parts are clean and in good working order but in used condition. Everything is sold AS-IS in good working condition. Feel free to ask any questions via PM or AIM. Buyer pays shipping and is optional on all parts.

THIS IS A "FOR SALE" THREAD NOT "FOR TRADES"

#1 complete thermostat assy. with new OEM Nissan thermostat less than 500 miles - $60 SOLD
#2 S13 SR20DET coolant upper water neck w/screws - $50
#3 S13 SR20DET turbo compressor outlet neck w/ screws - $30 SOLD
#4 OEM T25 oil drain return tube $15
#5 OEM S13 SR20DET dipstick tube and stick $40
#6 OEM Nissan slave cylinder bought new less than 500 miles w/SS braided line fits SR/KA/RB - $40 SOLD
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part1.jpg


#7 Greddy T25 turbo outlet elbow w/ divider plate - $140 SOLD
#8 OEM Nissan S14 power steering reservoir assy. - $60
#9 Stance ST9 oil block adaptor for SR20DET w/ new oil pressure sensor replaced less than 500 miles - $120
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part2.jpg


#10 AEM 3.5bar MAP sensor w/ pigtail and mounting clip - $100
#11 SARD fuel pressure regulator (FPR) with FRSport NOSHOK 0-160psi gauge kit and new fuel lines, clamps and mounting bracket - $200 SOLD
#12 OEM Z32 MAF connector harness pigtail - $10
#13 complete lower harness (alt, battery, starter, ground, fuse box) off S14 chassis - $50 SOLD
#14 AEM boost control solenoid - $50 SOLD
#15 OEM Nissan oil filler cap - $5
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part3.jpg

#16 OEM Nissan stock intake tube with intact spring coil - $10 SOLD
#17 OEM Nissan throttle body coupler hose - $5 SOLD
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part4.jpg

#18 stock sr20det valve springs 16pcs - $10
#19 stock sr20det cam gear set with nut and washer - $50 SOLD
#20 stock sr20det valve springs 16pcs - $10
#21 stock sr20det cam gears only - $20 SOLD
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part5.jpg

#22 ATI dual 52mm gauge pod for S14 240SX - $20 SOLD
#23 complete AEM 52mm serial data stream gauge for EMS - $140
#24 AEM 52mm wideband uego controller gauge - $150 SOLD
#25 Greddy/Trust 3" SR20DET steel downpipe w/ gaskets, nuts, bolts O2 sensor bung - $140 SOLD
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part6.jpg
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part7.JPG
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part8.JPG

HAD TO ADD SOME MORE SINCE THREAD IS DOING SO WELL. NEW ITEMS ADDED 11/02/11 2PM

#26 S13 SR blacktop IACV used, stripped plastic screw. was replaced with new one because of idle issues but can be cleaned and used - $40
#27 ACT 600225 XACT StreetLite Lightweight Flywheel 14.1lb 89-98 SR20DET barely used for less than 500 miles - $180 SOLD SOLD SOLD
#28 OEM Nissan SR20DET exhaust gasket unused from a OEM gasket kit / single layer - $10 SOLD
#29 Nismo slave cylinder for S13/S14 used in perfect condition - $100 SOLD
#30 OEM Nissan oil squirters (under pistons) 4pcs with screws - $80
#31 OEM Nissan coil packs in good working order 3pc (sold 1) - $50
#32 Stock S13 SR20DET throttle body with S14 throttle pulley, will include stock throttle pulley and working tps sensor - $80
#33 OEM Nissan knock sensor off a S13 SR20DET (harness sold) - $30 SOLD
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part9.jpg

#34 Custom made throttle cable bracket for S13 SR Greddy/ISIS intake manifold w/ N15 throttle body - $40
#35 Stock OEM Nissan lifters 12pcs - $20 SOLD
#36 S13 SR timing chain guide with screws - $10
#37 OEM S14 drivers side switch housing for SE models - $5 SOLD
#38 OEM S14 passenger side switch housing - $5 SOLD
#39 OEM S14 passenger side switch housing - $5 SOLD
(all switch housings have broken mounting points that are commonly broken)
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part10.jpg


#39b (oops) OEM Nissan AAC IACV was bought new about 3 years ago for $400. Perfect working condition, not as dirty and clogged as most of the older iacv's that come with motorsets from japan and has the metal screw that wont strip like the older plastic ones - $180 SOLD
#40 S13 SR20DET stock MAFS (Mass Air Flow Sensor) works - $45 (not sold but currently missing from my last move)
#41 OEM Nissan gasket for T25 turbo compressor inlet - $10
#42 OEM Nissan SR20DET alternator rebuilt to 90amps and only used for about a year. Comes with all brackets and bolts - $150
#43 OEM S13 SR20DET turbo manifold with heat shield. Comes with used T2 gaskets, nuts, bolts, washers, locking tabs (will include #28 if not sold before this purchase) - $50 SOLD
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part11.jpg


#44 OEM Nissan Valve Cut 17065-05U00 for fuel pump system. If you dont know what it is, you probably dont need it. Brand new unused - $10
#45 KA24DE starter USED condition - $45
#46 Stance oversized water pump pulley - Used in mint condition with belt in almost new condition - $60 SOLD
#47 OEM Nissan 11810-86G01 valve control / PCV valve BRAND NEW - $12 SOLD
#48 Used stock OEM shifter - $10
#49 Used OEM Nissan S13 SR20DET starter of a blacktop motor - $120
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part12.jpg


***NEWLY ADDED 11/09/2011 ***
#50 Brand New Signal Auto Aluminum Cooling panel for S13 (fits silvia and 180 fronts) - $50 picked up or $65 shipped
#51 OEM shifter boot and ring bracket - $50 shipped
#52 OEM shifter boot and ring bracket painted black - $50 shipped
#53 OEM upper rubber shifter hole boot - $50 shipped
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part13.jpg
http://www.lovemytint.com/bestint/4sale/052010/S13coolingpanels.jpg

ADDED 11/14/2011
#54 S13 SR20DET Blacktop head, OEM valves, cleaned and decked with new supertech valve seals. Nothing stripped or broken but missing cam caps. Put a machine shop to work or just use it as a mock up - $60 SOLD SOLD SOLD
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part14.jpg


#55 OEM S13 SR20DET crank with 1 bearing damage - $60
#56 OEM S13 SR20DET flywheel - $20
#57 OEM S13 SR20DET transmission bellhousing alignment plate - $50 SOLD
http://www.lovemytint.com/bestint/4sale/PARTS/OCT2011/part15.jpg

[psychos13]

good deals glws

[D1S13]

organized for sale thread FTW

BUMP

[s14newb]

Very fast shipping. Thanks again

[jeremyuhh]

nice FS thread. bump

[nujabe]

payment sent for wide band.

[Mitsubayati]

PM'ed you sir

[jdmlivin]

Nice stuff GLWS

[besTint]

lowball PM's are being ignored.

all other PM's replied. Sold items are being updated hourly.

added more item> BUMP

[slydin240sx]

Nice FS thread. All organized PROPER like. Bumpity bump!

[Seraphim38]

PM sent for Stance water pump pulley, Nismo OEM slave cylinder and stainless line. I can paypal for them tonight.

[Seraphim38]

payment sent for stance water pump pulley, nissan slave cylinder and braided line.

[nujabe]

got my wide band legit guys!! thanks ! bumpty

[Seraphim38]

fast shipping, great seller.

Tempted to buy the stance block adapter...

[zz_kouki_zz]

Hook me up with the knock sensor and turbo compressor elbow shipped to Orlando florida? pm me pls

Thanks!

[besTint]

got my wide band legit guys!! thanks ! bumpty


Thanks for the bump! enjoy.

fast shipping, great seller.

Tempted to buy the stance block adapter...

ty for the feedback =) pleasure doing business

Hook me up with the knock sensor and turbo compressor elbow shipped to Orlando florida? pm me pls

Thanks!
HOOKUP sent via PM

[1slicktwo4oh]

Free bump for a great seller^^^^

[Q.Smooth127]

hook me up on the greddy dp shipped to 96825?

[Fullboost99]

Bump!!! Nice FS Thread!

[besTint]

Free bump for a great seller^^^^
Thank you, hope you get to enjoy everything =)


Bump!!! Nice FS Thread!
Thank you for the bump.



hook me up on the greddy dp shipped to 96825?
PM'd you price shipped to Hawaii. Sorry but shipping is too much, dont think it'll be worth it.


weekend bump!

[Noxy]

Bump for great seller! Buy his stuff!

[nismo racer]

Ill take the aem boost solenoid. Pm me since my phone won't let me pm you for some reason....

[97nismo]

item #43 shipped to 29630

[besTint]

Ill take the aem boost solenoid. Pm me since my phone won't let me pm you for some reason....
$58 shipped - usps priority mail - paypal [email protected]
PM SENT


item #43 shipped to 29630
are you sure? shipping is $29.61 @ 18lbs
i would love to sell it but i think you'd be better off finding it local and avoid shipping on something like this.

[97nismo]

Would u separate the shield ?

[besTint]

Would u separate the shield ?


sorry, it'll make it harder to sell. but if someone wants to pick up just the manifold i'll let you know.

[Socal_sil80]

bump for you! thanks again!

[wangan_cruiser]

i love your for sale thread. bump for u

[JDGrimReaper666]

PM me if youre taking trades for #11.

[T40sx]

you don't have the stock sr cams with those sprockets, do you?

[besTint]

you don't have the stock sr cams with those sprockets, do you?

Sorry the stock cams were sold a while ago.



PM me if youre taking trades for #11.

Sorry trying to get rid of stuff no trades =/


THANK YOU GUYS FOR THE BUMPS! please keep checking back and bump me if possible, i am constantly adding more items so dont miss out!

[besTint]

Bump for the weekend! lots of stuff left guys! i will do my best on shipping prices! LMK what you need.

[Dee]

nice stuff for sale here, bump.

[KLgear]

bump for legit guy

[s13kouki69]

thank you soo much,you saved my life with those impossible to find parts!

[Chrisw]

Bump for how a for sale thread should be done!

[2LiterTurbo]

Dannnnnnggg super clean sale thread. Free bump for a person that took the time to produce one of the most cleanest for sale threads I've ever seen. It makes me wanna buy some parts and not pay my cell phone bill!!!!! bahahah GLWS

[s13_ricky]

Bump. Sick sale thread!

[wickeds13]

Do you still have #39b (oops) OEM Nissan AAC IACV? Are you willing to let it go for $60 picked up? PM Back. Thanks!

[besTint]

i have an older IACV with plastic screw i can let go for $60. works but you will need to replace the plastic screw because the phillips looks like a star.

[Koukisteve29]

The mother of all for-sale threads ladies and gentlemen

[venom]

do u still have any s13 cooling panel?
thank you.

[OutlawLui]

got a ps pump?

[besTint]

do u still have any s13 cooling panel?
thank you.
yes i have more $50 picked up or $60 shipped


got a ps pump?
i do, with brackets, pulley, belt, lines, and reservoir. will only sell as complete $350 +shipping will take pics and add to post soon.

[AHTOXA]

need good used connecting rod for SR20DET S13 blacktop
Please let me know if you have one. [email protected]

[jerry_beans]

37 38 39 shipped to 79928z pm me lmk paypal ready

[jhony]

bump for a legit guy and his bomb a$$ FS thread!

[besTint]

lowered some prices and updated thread. BUMP to the top =)

[d_nice]

old tread but is parts still their or sold

[unknownkris_s14]

wouuldnt happen to have a s14 zenki hoodlatch now woulya?

[besTint]

old tread but is parts still their or sold

all parts are updated. so if its not listed as SOLD then they are available =)


wouuldnt happen to have a s14 zenki hoodlatch now woulya?

i do not have one for sale. sorry

[toykr3w]

do you still have the lower harness

[jhony]

Bump for a grate seller this guys legit!

[besTint]

sorry, missed the lower harness. was sold a while back.
thread now updated.

[walner240]

you dont happen to have a ignition switch laying around would you??

[Dori90]

can you take 120 if i drive up from SD and come get it?

[besTint]

can you take 120 if i drive up from SD and come get it?

when do you plan on coming up?


you dont happen to have a ignition switch laying around would you??

sorry i do not. ill see how much i can one for though.

[HB JDM]

PM Sent about the MAF, hoping you still have it!

[My240sx]

pm sent for the sr manifold

[Coyotito]

would that cooling panel fit s13 coupe very interested in it

[besTint]

pm sent for the sr manifold

PM replied, still available so text me when your up here.



would that cooling panel fit s13 coupe very interested in it

fits both 180sx and silvia front ends as shown in picture below the item. 1 left. lmk i can meet up tomorrow on my day off.

[khalimadeath]

Bump for very well put together FS thread.

[Ryanswartout]

Hey interested in #54 the bare head my number is 5032908746 thanks

[Meow636]

Check your inbox please

[Mofuhcka]

This is what every FS thread should look like

[besTint]

This is what every FS thread should look like
thank you for the praise~! =)


Check your inbox please
checked and replied!


Hey interested in #54 the bare head my number is 5032908746 thanks
text sent!


Bump for very well put together FS thread.
THANK YOU!

[besTint]

it's been a while. to the top. still some parts left.

[240knockout]

bump for having the best for sale thread.

[Dripht240]

looking for just the tensioner bracket and hardware for the alternator. willing to sell?

[brndck]

still have that greddy downpipe?

[s13#4]

do you know if the crankshaft was on standard size when it got damage?

[besTint]

do you know if the crankshaft was on standard size when it got damage?
yes it was std bearings


still have that greddy downpipe?
no sorry, sold.


looking for just the tensioner bracket and hardware for the alternator. willing to sell?
make me an offer i cant refuse.