Canasv13667
10-29-2011, 06:36 AM
Just testing waters and up for OBO is a z32 vlsd with 5 bolt axles and OEM bolt fasteners. It's off a '90 N/A z32 300zx 2+2. The bolts are a MUST due to the extra length the z32 vlsd bushings require. I'll throw in the LCA's off the same z32 for an added $20. If the 5 bolt axles are NOT to be used then this vlsd will require 2 s13 SHORT open diff. axle ends (LCA's are STRONGLY recomended. Z32 Lsd Upgrade (http://www.teamgeko.com/id18.htm) use this a my reference) or the various other solutions out there to make it all work for a leak free use. All this is a bolt on affair and I'll help you install at my home for an added $50. I also have the uprights with iron sleeves for and added $60. I DO NOT have z32 rear coils to go with these and YOU WILL have to provide your own if you choose to go that route. I'm usually able to do the work on fri-sun weekends but if I can work something out with you then we can schedule for a weekday time. This set up is currently on my car and I will glad show you the set up if you txt me at 315-222-6058. Serious offers only and keep negative thoughts off plz