Gunmetalr32 s14 kouki valances are now for sale!!!

[gunmetalr32]

i just became zilvia.net advertiser

i just finished my valances about a month ago and i just wanted to wait for the feed back before i started selling them..

these are currently on sale on ebay for $280 + $30 shipping

for all zilvia members prices are $250 with a full install kit.. shipping will be $30

http://i184.photobucket.com/albums/x198/ADRIANS13/892C2B47-EA43-4F75-B3D9-0C33872F4A9C.jpg



install kit will consist of:

1x roll of 1/2 inch 3m double sided tape (same as oem)
(enough to cover 2 valances + a little more)
4x 10mm square anchor nuts (same as oem)
4x black phillips truss head m4.2x20 screws (for a flat clean look)
2x black push type retainer (same as oem)

http://i184.photobucket.com/albums/x198/ADRIANS13/P4220361.jpg

http://i184.photobucket.com/albums/x198/ADRIANS13/P4220358.jpg


pm me or call or text for faster response

805-203-2(JDM)
805-203-2536

PICTURES OF THEM INSTALLED

http://i184.photobucket.com/albums/x198/ADRIANS13/Picture019.jpg

http://i184.photobucket.com/albums/x198/ADRIANS13/Picture020.jpg

PICTURES OF THEM PAINTED AND INSTALLED

http://i184.photobucket.com/albums/x198/ADRIANS13/2011-10-14153717.jpg

http://i184.photobucket.com/albums/x198/ADRIANS13/2011-10-14153744.jpg

http://i184.photobucket.com/albums/x198/ADRIANS13/2011-10-14153805.jpg

ONCE THE TECH SECTION IS BACK AND RUNNING I WILL ADD THE LINK TO THE REVIEWS

[heyitzalan]

if they are a lil bit cheaper, ppl will jump on this. are they replica?

[sickstatus]

Awesome price for legit valances. These fit perfect.

[gunmetalr32]

if they are a lil bit cheaper, ppl will jump on this. are they replica?

yes these are reproductions and are made with high quality fiberglass and grade A resin.. they even have the support bracket like oem

used oem are going for $350 and you have to prep the valances for paint block and primer them until they are straight.. get all the waves out.. and if they have imperfections, cracks, blems, ect you have to fix that.. and on top of that they don't come with a full install kit

[XiaoAZN]

Very nice valences. Just wondering, do you have any plans on making Type X Valence replicas?

[unseen-forces98]

Nice I like the work?

[gunmetalr32]

Very nice valences. Just wondering, do you have any plans on making Type X Valence replicas?

right now i pulled the trigger on the s14 jdm oem lip.. i'm just waiting on the lip to be shipped out

and i really want to do the s13 coupe valances.. i seen some replicas last night that my friend and they look like shit..

after this i might jump on some other stuff ex. real gp sport roof wing and trunk lip. i dk yet

Nice I like the work?

thanks just wait for the tech section to come back and i'll post the link

[andisan]

wow good work, ill wait till the coupe ones come out.

[gunmetalr32]

wow good work, ill wait till the coupe ones come out.

Me too I'm just waiting for some one to step up and let me borrow them.

Any takers??? I'll give you a free set

[jdmlivin]

Real nice job dude they look sick !!!

[EviLGen1uS]

Yea the valances on the coupe do look like shit.. Make them ASAP so I can buy LEGIT ONES!

[gunmetalr32]

Real nice job dude they look sick !!!

thanks flip... sorry for bugging you but, i really need that kouki lip!!!! and if you come across some s13 coupe valances hit me us asap!!

Yea the valances on the coupe do look like shit.. Make them ASAP so I can buy LEGIT ONES!

sorry Lyle . but your valances look like 3 year old made them.. yesterday was the 1st time i seen these horrible replica valances and i'm disgusted on how they fit.. and you have to use a heat gun to make them fit bettter .. that's b/s.. and they still fit like shit. i cant believe they sell these

who makes those??

[wowitsaboy]

when you do the coupe valances I WILL be buying a first production set. good work

[gunmetalr32]

when you do the coupe valances I WILL be buying a first production set. good work

Thanks nash.. I'll hook you and lyle up

[dwnshft2drft]

Its all about time patient and skills. Luckily i got mine $275 shipped NIB! I dare you to make JDM s14 kouki front lip!

[gunmetalr32]

Its all about time patient and skills. Luckily i got mine $275 shipped NIB! I dare you to make JDM s14 kouki front lip!

Challenged accepted...

[240sxvaj]

Challenged accepted...


These are some nicely replicated valences!
When will you have gp sport roof spoiler by? im gonna paint my car and need one real bad if the price is right. they seem to look less bulky than all other roof spoiler which is my taste for that clean flush look. I can post results of it painted and installed if you give me a little discount. :kiss:

[EviLGen1uS]

Bing's make them. Fitment and quality is exactly how he described them. Looks like they were made by a 3 yr old. I was tired of not having rear aero so I got them til I get my hands on oem ones. But we all know they are rare to find. And if you did find them they are either sold or someone already is interested within the first couple minutes of the seller posting them. I wish I knew you were interested in making coupe valances I woulda waited for those.

Replicas made to fit like OEM without body work or fitment issues and an install kit. What more can you ask for? Like Nash said if you ever make coupe valances with OEM fitment quality. I WILL be buying the first production set.

[gunmetalr32]

These are some nicely replicated valences!
When will you have gp sport roof spoiler by? im gonna paint my car and need one real bad if the price is right. they seem to look less bulky than all other roof spoiler which is my taste for that clean flush look. I can post results of it painted and installed if you give me a little discount. :kiss:

Right now I'm trying to get that s14 kouki lip started and finished..

Bing's make them. Fitment and quality is exactly how he described them. Looks like they were made by a 3 yr old. I was tired of not having rear aero so I got them til I get my hands on oem ones. But we all know they are rare to find. And if you did find them they are either sold or someone already is interested within the first couple minutes of the seller posting them. I wish I knew you were interested in making coupe valances I woulda waited for those.

Replicas made to fit like OEM without body work or fitment issues and an install kit. What more can you ask for? Like Nash said if you ever make coupe valances with OEM fitment quality. I WILL be buying the first production set.

I'll try my best to get these finished before december

[aznsidez]

Hit me up when you start selling those... They look great!!

[Sugoi_Style]

These look quite nice, but the $280 shipped price for replicas seems a bit steep. But hey, it's all about that supply and demand!

If I can acquire a Kouki rear bumper, I may get these...hmm.

[gunmetalr32]

Hit me up when you start selling those... They look great!!
I'll be making a thread.. Updating it as make them

These look quite nice, but the $280 shipped price for replicas seems a bit steep. But hey, it's all about that supply and demand!

If I can acquire a Kouki rear bumper, I may get these...hmm.

oem ones sell for $350 used.+ shipping . Not including a install kit.

Mine are $100 less and come with a install kit and are perfectly straight all the waves , high and low spots are gone. Just scuff and paint.

[sw20>>s14]

i may just replace my shine autos with a set of these...

[gunmetalr32]

i may just replace my shine autos with a set of these...

I have 2 in stock

[Salem240]

Thanks Adrian! I received my valances today and all I can say is DAMN THEY LOOK GOOD!!! Anybody that says $280 is steep has never seen other replicas. These are copied exactly like the OEM valances with molded in radiused edges and all hardware and even 3m tape! I'm tempted to say these are better than OEM because they dont have to be primered and blocked, just scuff seal and spray! They flex similar to OEM, they fit like OEM, they look like OEM, have all the hardware like OEM, intalled nobody can tell they're not OEM.... well worth the $280.00 :bigok:

Here are a few crappy cell pics of the unboxing

safely bubble wrapped
http://i291.photobucket.com/albums/ll290/AngeliaH24/240%20pics/IMG_20111029_121544.jpg

hardware pack
http://i291.photobucket.com/albums/ll290/AngeliaH24/240%20pics/IMG_20111029_121606.jpg

unwrapped
http://i291.photobucket.com/albums/ll290/AngeliaH24/240%20pics/IMG_20111029_122731.jpg

see how straight! Oh, and radiused edges too :wiggle:
http://i291.photobucket.com/albums/ll290/AngeliaH24/240%20pics/IMG_20111029_121843.jpg

[slamn240]

you have me sold. Great job on the valances and ill be contacting you on getting a set soon. Also if your making the front kouki ill pick one up after you have them done

[florante rea]

I think 230- 250 is more likable shipped! I'll get a set plus the front kouki lip too.

[gunmetalr32]

Thanks Adrian! I received my valances today and all I can say is DAMN THEY LOOK GOOD!!! Anybody that says $280 is steep has never seen other replicas. These are copied exactly like the OEM valances with molded in radiused edges and all hardware and even 3m tape! I'm tempted to say these are better than OEM because they dont have to be primered and blocked, just scuff seal and spray! They flex similar to OEM, they fit like OEM, they look like OEM, have all the hardware like OEM, intalled nobody can tell they're not OEM.... well worth the $280.00 :bigok:

Here are a few crappy cell pics of the unboxing

safely bubble wrapped
http://i291.photobucket.com/albums/ll290/AngeliaH24/240%20pics/IMG_20111029_121544.jpg

hardware pack
http://i291.photobucket.com/albums/ll290/AngeliaH24/240%20pics/IMG_20111029_121606.jpg

unwrapped
http://i291.photobucket.com/albums/ll290/AngeliaH24/240%20pics/IMG_20111029_122731.jpg

see how straight! Oh, and radiused edges too :wiggle:
http://i291.photobucket.com/albums/ll290/AngeliaH24/240%20pics/IMG_20111029_121843.jpg
Thanks for the review. Can't wait to see your car painted..Please post pics
you have me sold. Great job on the valances and ill be contacting you on getting a set soon. Also if your making the front kouki ill pick one up after you have them done
Just let me know..
I think 230- 250 is more likable shipped! I'll get a set plus the front kouki lip too.
I think $250 is a fair price.. I'm not a huge company mass producing these things on a assembly line..

[riboflavin]

Hey, do you have these in stock? I'm ready to order. Can you send me your paypal info.? Thanks.

[gunmetalr32]

Hey, do you have these in stock? I'm ready to order. Can you send me your paypal info.? Thanks.

[email protected]

[riboflavin]

payment sent. Thanks

[gunmetalr32]

payment sent. Thanks

I forgot to add 3% for paypal fees.. But it's cool.. I'll ship them out on monday

[gunmetalr32]

1 set left..

[gprb25]

I may have missed it, but when is the ETA on the jdm kouki front lip?

[gunmetalr32]

that thread is in the tech page.. and the tech page is currently down at the moment.. i hope i can have it done before Christmas.. i will start taking deposits for the 1st 10 spots a group buy thread will be up shortly

[gunmetalr32]

finish that jdm rear bumper already.. Your side skirts will thank you..

[gprb25]

finish that jdm rear bumper already.. Your side skirts will thank you..

Haha, I know man. I have a set of the vanquish valances that have yet to make it on the car. If they don't work out, I will definitely buy a set from you.

I will be keeping my eye out for that group buy. Thanks for supporting the community!

[florante rea]

Yeah front lip, jdm kouki fronts, jdm rear bumper and lastly navan sides I'm in:-)

[sw20>>s14]

whats the turnaround time for each batch? i may wait until your next.

[RB180sxChris]

Like much!

[gunmetalr32]

Haha, I know man. I have a set of the vanquish valances that have yet to make it on the car. If they don't work out, I will definitely buy a set from you.

I will be keeping my eye out for that group buy. Thanks for supporting the community!
I'll make you a special deal if you break those vanquish valances and post it on youtube

pm me

Yeah front lip, jdm kouki fronts, jdm rear bumper and lastly navan sides I'm in:-)

yeah buddy.. that's what I'm rocking
whats the turnaround time for each batch? i may wait until your next.
i just finished a set .. in gray (like oem) i kinda like them black but i don't want them to look like shine auto stuff

since i'm naming all my stuff sexually active (products,aero,kit) ect

http://i184.photobucket.com/albums/x198/ADRIANS13/2011-11-01180708.jpg

http://i184.photobucket.com/albums/x198/ADRIANS13/2011-11-01180813.jpg

http://i184.photobucket.com/albums/x198/ADRIANS13/2011-11-01180830.jpg

Like much!
thank you sir

[gunmetalr32]

New gray (same as oem) valances

1 set available

[gunmetalr32]

I have a few people interested.. And I have 2 sets left

1x black (last black)
1x gray (like oem)

[gunmetalr32]

Last black set sold

1x gray set still available

[harangatang]

Make a GB for the lip and valances. Pleaseeeeeeee! haha I'll be all over that shit.

These things look oem! So happy someone finally did this. +1 +1 +1 +1

[gunmetalr32]

Make a GB for the lip and valances. Pleaseeeeeeee! haha I'll be all over that shit.

These things look oem! So happy someone finally did this. +1 +1 +1 +1

I'll be getting a lip soon then I'll start a group buy on the lips.. As for the valences I dont see a group buy anytime soon

[gunmetalr32]

buy some valances ... your jdm rear bumper is lonely and wants company

[gunmetalr32]

sold out!!!!

[gunmetalr32]

Its all about time patient and skills. Luckily i got mine $275 shipped NIB! I dare you to make JDM s14 kouki front lip!

you have me sold. Great job on the valances and ill be contacting you on getting a set soon. Also if your making the front kouki ill pick one up after you have them done

I'll get a set plus the front kouki lip too.

I may have missed it, but when is the ETA on the jdm kouki front lip?

I will be keeping my eye out for that group buy. Thanks for supporting the community!

Make a GB for the lip and valances. Pleaseeeeeeee! haha I'll be all over that shit.

These things look oem! So happy someone finally did this. +1 +1 +1 +1

ok the group buy is ready to go.. #/f/group-buys/417653-gunmetalr32-s14-jdm-kouki-oem-lip-group-buy.html

[lovdrifting52]

yo adrian jose might pick some of these up ,, hopefully we get a local pick up deal haha ill let u kno when hes ready to buy some

[gunmetalr32]

yo adrian jose might pick some of these up ,, hopefully we get a local pick up deal haha ill let u kno when hes ready to buy some

Alright. Mang let me know.. I'll have 2-3 sets made this week

[outtacontrol240]

Let me know when these valance are ready I'll take a set

[gunmetalr32]

Let me know when these valance are ready I'll take a set

i have 2 sets finished .. just waiting for them to harden a little more before I'm able to ship.

[outtacontrol240]

Let me know thru pm with payment info

[gunmetalr32]

Let me know thru pm with payment info

You got a pm

1 set sold, 1 set left

[outtacontrol240]

Payment has been sent via paypal thank
let me know the process

[FknDopeS14]

Anymore left?!? Please send me Paypal info, will process payment on Friday

[gunmetalr32]

Payment has been sent via paypal thank
let me know the process
you got a pm
Anymore left?!? Please send me Paypal info, will process payment on Friday

SOLD OUT... SORRY

i will have a few sets finished next week and 2 sets are already pre sold..
i cant keep these in stock they sell faster than i can make

[FknDopeS14]

Anyway you can send paypal info and I can send the money over for a pre-sale? Really want to get my hands on a pair...lemme know

[xXKoukiXx]

Yes me too. I would like to preorder. Thank you.

[gunmetalr32]

Anyway you can send paypal info and I can send the money over for a pre-sale? Really want to get my hands on a pair...lemme know

Yes me too. I would like to preorder. Thank you.

alright. no problem..

they wont ship out for 2 weeks.. since they will have to fully cure

[FknDopeS14]

Not a problem....Thanks, PM paypal info and I'll send money over along with shipping info :rawk:

[gunmetalr32]

alright you both got a pm..

[superdorifto]

[email protected]

Same question, just sent you a text, looking for this same bit of info...mabye I should have read all the way through the thread.

I just want to be sure that you have some in stock before I send the money.

[gunmetalr32]

I'm out of stock right now and have 3 pre orders

[superdorifto]

I'm out of stock right now and have 3 pre orders

Well sign me up for the next batch, I just paid via paypal to the above paypal address.

[gunmetalr32]

got it.. I'll send you a pm with a tracking number when i send it out

[gunmetalr32]

sorry guys.. i'm trying to catch up with all the pre orders...

and if you bought from me please update my trader rating.. thank you

[gunmetalr32]

all pre orders are filled.. I'll have 3 sets buy the end of this week

[gunmetalr32]

3 sets available for pick up or

(still need to harden before ready to ship)

ready to ship on Tuesday

[xXKoukiXx]

How are the fitment on these? Also, how durable are these? Will they withstand constant rock chip abuse thats being caused the the rear tires?

[superdorifto]

all pre orders are filled.. I'll have 3 sets buy the end of this week

Do you have a tracking number for mine yet? feel free to follow up via PM, dont want to clutter up your thread.

[gunmetalr32]

i finished all the pre orders. i just ran out of some parts for the hardware kit.. they are all boxed up and ready to ship

[gunmetalr32]

2 sets available!!!

[florante rea]

Highly interested! Dove take cc?

[florante rea]

I meant take credit card, lol. Front lip n rear bumper apron, please send me ur contact number. Ty.

[gunmetalr32]

I meant take credit card, lol. Front lip n rear bumper apron, please send me ur contact number. Ty.
you got a pm..

[gunmetalr32]

I got 2 sets boxed up and ready to ship to that looney rear bumper

[blueshark123]

when will be seeing updates on the lip

[xXKoukiXx]

I got 2 sets boxed up and ready to ship to that looney rear bumper

I just sent the money via paypal.

Can you ship today w/ tracking number?

thanks.

[gunmetalr32]

I'm currently working ..i can ship out tomorrow morning

[gunmetalr32]

1 set left ! Buy now

[gunmetalr32]

these cars look good..
http://www.freeimagehosting.net/uploads/b445afd9dc.jpg

[98_240_KA]

Because I'm on the group buy this means I'm getting the package deal (lip and valance) at a discounted price correct? If not I'll take that last valance. Let me know, I don't want to miss out on the valances.

Thanks

[gunmetalr32]

the only savings you'll get will be on shipping

[gunmetalr32]

if anyone in the la area wants the last set of valances and doesn't want to pay for shipping.. i will be in the la area tomorrow price will be $250 .. please pm me ..

[gunmetalr32]

i'm leaving to la in 20 min if anyone wants them lmk

[gunmetalr32]

Sold out!!!

I'll have a few sets in 2 weeks

[superdorifto]

Bumping the thread with my review:

I was a bit nervous paying up front for a set of parts that were already on back order, but the seller hit the 3 week mark nearly right on the head.

Parts were well packaged, and included all of the OEM style mounting hardware

Quality is beyond excellent - No waves or flaws in the fiberglass, and nice radiused edges. Once they are painted and installed I doubt anyone will ever be able to tell they are replicas.

Anyone that is unsure about ponying up should not be worried, you will not be disappoint.

[Smurf_240SX]

Are these still being made? I'm looking to buy the valences and Front lip!

[Smurf_240SX]

Any idea when mine will be shipped out?

[gunmetalr32]

Any idea when mine will be shipped out?

Shipped out today..

[gunmetalr32]

Alright guys I'm back.. I have a few sets available

[Smurf_240SX]

Thanks! looking forward to the lip as well.

[gunmetalr32]

Does anyone have updated pictures if the valances

[viksz33]

Does anyone have updated pictures if the valances

semd me price shipped for the valances and jdm lip shipped to 33782 and i will post pics within a week after receiving

[killer skittle]

Have any left?

[gunmetalr32]

semd me price shipped for the valances and jdm lip shipped to 33782 and i will post pics within a week after receiving
I have a few sets and I have a long waiting list for the lip right now

Have any left?

yes I have 4 sets left

[upsdude]

pm sent :P

[mysharonna]

Any valances left?

[domino]

Any valances left?

x2

I would like a set as well, PM sent

[str8customs]

interested in a set! pm box full

[dct223]

Hey!

Are you still selling those s14 valances??

I didnt see your auctions on ebay anymore and the replicas i just recently picked up fit like crap =[

please let me know! I'm down to be on a wait list or preorder whatever!


-Davis

[Volcom887]

please pm me or call me i live rite down the 126 from u and i want to pick up some stuff...

call me or text me

6618749969

for some reason ur # wont work for me to call you

[jorge1190]

I tried PMing you but your inbox is full.

[gunmetalr32]

I have a few sets in stock

[sncs14]

If you've still got a set, I'll buy 'em. PM me if you don't mind, and I'll send payment ASAP.

[mrevo240]

Just installed mine, will post pics later, THESE ARE PERFECT FIT. Get these!

[Encore]

Do you have any of the rear valences at the moment? I would like to purchase a set, or go on a wait list if necessary.

[gunmetalr32]

Do you have any of the rear valences at the moment? I would like to purchase a set, or go on a wait list if necessary.
shipped yours out today

i got 3 sets left and im offering a xmas prices