PDA

View Full Version : Chase Bays RB20DET, RB25DET, and RB26DETT

Chase Bays
10-21-2011, 02:46 PM
We’ve got some great harnesses to show you. Probably a few of the most requested harnesses to be produced by Chase Bays, and here they are. There are so many features these have to offer, this kind of innovation and flexibility has never been done in our industry.

Even though the RB engines are remotely the same harness build, there is about 30 electrical variations. Variants include, coil packs or spark plug wires, coil igniter or integrated igniter, crank/cam sensor & pickups, different ECU’s, injectors, VTC valve, and a few others. We’ve done the research and become very familiar with these variants. So even if you’re not familiar with the electrical components, we are. The harness can plug into, basically anything. We use the same black 16pin connector near the ECU plugs on all of our harnesses. It has all the chassis inputs and outputs you need. The opposite side of this connector is what we adapt to YOUR chassis. When ordering this product on our website it will ask you all the info we need to know via drop down menu’s. This is all the innovation and flexibility mentioned above. Noone else knocks out 20 birds with 1 stone.

http://farm7.static.flickr.com/6163/6267714884_65269584e9_b.jpg
http://farm7.static.flickr.com/6160/6267715798_da0dcb8322_b.jpg
Chase Bays RB20DET Engine Harness (http://www.chasebays.com/product/nissan-240sx/chase-bays-products/chase-bays-engine-harness--nissan-rb20det)

CM1 - $649.99
CM2 - $949.99
CM Mil Spec - $1,349.99



http://farm7.static.flickr.com/6237/6267191877_f7b467757d_b.jpg
http://farm7.static.flickr.com/6044/6267716070_40e50a5d68_b.jpg
Chase Bays RB25DET Engine Harness (http://www.chasebays.com/product/nissan-240sx/chase-bays-products/chase-bays-engine-harness--nissan-rb25det)

CM1 - $649.99
CM2 - $949.99
CM Mil Spec - $1,349.99



http://farm7.static.flickr.com/6033/6354103197_1e53f6312d_b.jpg
http://farm7.static.flickr.com/6228/6354103651_8e2baca26c_b.jpg
Chase Bays RB26DETT Engine Harness (http://www.chasebays.com/product/nissan-240sx/chase-bays-products/chase-bays-engine-harness--nissan-rb26dett)

CM1 - $699.99
CM2 - $999.99
CM Mil Spec - $1,399.99



PM for the lowest shipping prices. Find out more info on these harnesses by clicking the product names above
nightsauce
10-21-2011, 02:51 PM
bump for awesome craftsmanship. I used to make harnesses for my previous job, its a very time consuming task.
landins13
10-22-2011, 08:58 AM
you guys should make a plug and play harness to plug s13 kouki tails into the usdm 240sx tail light harness. I know the wiring is easy it would just be nice to not have to cut and splice to install them.
Edwin562
10-22-2011, 09:22 AM
you guys should make a plug and play harness to plug s13 kouki tails into the usdm 240sx tail light harness. I know the wiring is easy it would just be nice to not have to cut and splice to install them.

^^^this would be nice...
sleeper108
10-22-2011, 09:59 AM
Do we need to supply harnesses, or are these already premade?

I've bee looking at wiring options recently, I decided I wont do mine
drivnovrdaedge
10-31-2011, 02:45 PM
Your inbox was full

Wondering if u guys could wire up the chase boy 1jzgte harness so that it could connect to the body harness of a 1988 BMW 325is instead of s13 or s14... I have the bmw engine harness I can send along with the 1 jzgte harness

Was also wondering if u have pics or the race relay board / fuse box. ..
Chase Bays
11-04-2011, 05:21 PM
Do we need to supply harnesses, or are these already premade?

I've bee looking at wiring options recently, I decided I wont do mine

You supply your RB harness, and if you have an S14 you supply the KA and RB.
Chase Bays
11-04-2011, 05:23 PM
Your inbox was full

Wondering if u guys could wire up the chase boy 1jzgte harness so that it could connect to the body harness of a 1988 BMW 325is instead of s13 or s14... I have the bmw engine harness I can send along with the 1 jzgte harness

Was also wondering if u have pics or the race relay board / fuse box. ..

Yes we can do that. For those pictures, i'll have to check.

Chase Bays 1JZ/2JZ Engine Harness (http://www.chasebays.com/product/nissan-240sx/chase-bays-products/chase-bays-engine-harness--toyota-1jzgte--2jzge--2jzgte)
BlewByYou
05-14-2012, 05:14 PM
Weird but if these are brand new harness, why do you charge an extra $150 for a stock old worn out harness?
chris300zr
05-15-2012, 12:39 PM
As much as l would like a $1,350 mil spec harness, I am going to attempt this on my own with the 25 and see how badly I biff it.

Bump for CB, there P/S and brake kits are TITS.
ch1873857
05-15-2012, 01:37 PM
Weird but if these are brand new harness, why do you charge an extra $150 for a stock old worn out harness?

quote for GOOD ass question......... :hide: