PDA

View Full Version : Flushing Power Steering system...just bought the car..it has wrong fluid help!!!!!!


jesse1984
10-17-2011, 08:54 PM
just bought the car. has a P/S fluid leak. after searching on here to fix/find/even rebuild pump...i found that it is suppose to have ATF not power steering fluid. so i need to know how to flush the system so i can fill it with ATF and see if that is what's leaking and then figure out how to fix it. i just hope it hasnt F'd up the R&P. Thanks in advace.

sidelight
11-07-2011, 03:08 PM
under the steering fluid resevior, there is a black hose, a screw on clip at the top.
Another clip at the end of the black hose.

Loosen the clip to where you can yank the black hose off.

1 Put a gallon pan under the steering reseviour. A lot of cardboard under the whole front.
incase you live in apartments
2 Take of the black hose and let all the dark fluid out

3 NEVER STEER THE WHEEL WITH NO FLUID IN THE RESEVOUR

jesse1984
11-10-2011, 01:41 PM
sounds good ill be working on this once i figure out what rong with my #1 Cyl..check out the thread and see what you think

fliprayzin240sx
11-11-2011, 10:26 AM
I took off the reservoir and dumped it out. Refilled with ATF fluid and some more thickener, just keep topping it off until you bleed out all the old fluid.