PDA

View Full Version : Fastbrakes kit for 240sx and Z32

Ghettokracker71
12-06-2003, 10:34 PM
I was doing some research about the classic Z32,or 300zx brake upgrade when I saw this fastbrakes upgrade kit for the z32 OR 240sx,wich is litterally putting upgraded Z32 brakes on,I was wondering if any of y'all could tell this newbie what they knew about it.........


http://www.fastbrakes.com/products/product.php?partnum=FBN08
TonyC
12-07-2003, 02:18 AM
That's a good kit if you are willing to shell out $1,500. For 240s all you will probably ever need is stock Z32s which can be had for way less.
Ghettokracker71
12-08-2003, 10:43 AM
:eek: Whoa....teachs me to pay more attention to the price tag! Wow, I understand that the Z32 N/A calipers are slightly smaller than the Z32 TT calipers, whats the difference in actually adapting them to my 4 lug set-up ,then ? (you'll have to excuse the stupidity of this post,and my other posts,I am an Ex-muscle car head,having sold my Chevelle for a s13)
Dousan_PG
12-08-2003, 10:48 AM
just redrill rotors to 4 lug

bolts up exactly the same as 5 lug.

rotor lug pattern is the ONLY thing that is different
Ghettokracker71
12-08-2003, 03:13 PM
PDM upgrade at $950 ?

http://www.pdm-racing.com/products/brakesz32.html
TonyC
12-08-2003, 03:50 PM
Heavythrottle has them for like $500-600 I think.
Ghettokracker71
12-10-2003, 01:55 PM
Nice,....thanks man
MadChild
12-10-2003, 02:12 PM
HOLLY CRAP that is way over priced. I would never pay over 1g for rotor, pads, and calibers doesn't matter what they are. I just did my z32 upgrade this pass summer. It cost me a little under $500 I believe w/ stainless lines for the front/rear. Installation took a little under 2 hours. The $500 included Rotor from PDMRACING, LINES from SRSWAP, Calibers w/pads from my Local AUTOZONE
Ghettokracker71
12-11-2003, 03:37 PM
Originally posted by MadChild
HOLLY CRAP that is way over priced. I would never pay over 1g for rotor, pads, and calibers doesn't matter what they are. I just did my z32 upgrade this pass summer. It cost me a little under $500 I believe w/ stainless lines for the front/rear. Installation took a little under 2 hours. The $500 included Rotor from PDMRACING, LINES from SRSWAP, Calibers w/pads from my Local AUTOZONE

Thanks ! :)
kandyflip445
12-11-2003, 10:45 PM
Originally posted by MadChild
HOLLY CRAP that is way over priced. I would never pay over 1g for rotor, pads, and calibers doesn't matter what they are. I just did my z32 upgrade this pass summer. It cost me a little under $500 I believe w/ stainless lines for the front/rear. Installation took a little under 2 hours. The $500 included Rotor from PDMRACING, LINES from SRSWAP, Calibers w/pads from my Local AUTOZONE


Were they SOUL CALIBERS?:D
MadChild
12-11-2003, 11:16 PM
Those caliper I got were the orginally sumimoto Calipers of the Z32's. Make sure it says that on there...they are just rebuilt, almost like brand new, but not quite brand new. It works like a charm
uuninja
12-12-2003, 03:28 AM
Originally posted by MadChild
Those caliber I got were the orginally sumimoto Calibers of the Z32's. Make sure it says that on there...they are just rebuilt, almost like brand new, but not quite brand new. It works like a charm

caliPers :bow: