Rota IK-R on S13?

[initial240sx]

hi,

i recently have the rota p45r 17x9 +12 but they stick out about an inch, so i looking for another set of Rota with better offset.. i saw on the catalog the Rota IK-R.. seen likes the TE37.. these are the 2 sizes available:

17 x 9 4 x 114.3 +35
17 x 9 4 x 114.3 +25

i have the a stance gr+ suspension and z32 30mm calipers.. with the p45r i had plenty of room... so this IKR will work on this specs and wont stick out? or can i find this p45r in a better offset?

[shiftdrift]

Doesn't need it's own thread, many threads on fitment. There is a search button, please use it.

[90white240]

whahhh??????

[initial240sx]

close this thread... i try to find IKR but nothing appear

[whiterps13]

What tire sizes are you running?

Lower the car, max out camber. 17x9 +12 should fit perfectly on stock fenders.

[zooopreme]

Since there is a topic for this...

I noticed that Rota's site doesn't have it's Grids anymore. They have the 16" and smaller grids but they didn't seem to have their 17-18" grids in the 9"+ size.

Are the IK-R's the new Grids?

[jaysgottaredtop]

Lower the car, max out camber. 17x9 +12 should fit perfectly on stock fenders.

the fact that he's asking shows that he probably doesn't want to be yet another stance SNIP with 205s stretched and cambered to "fit"

lower the car, zero out camber. 17x9 +25 will allow for some beefy tires on stock fenders. 235/40 or 245/40 front, 245/40 or 255/40 rear. and if needed (depending on your tires/coilovers), small slip-on spacers up front for clearance.

go forth into the world and prosper. :2f2f:

[cdlong]

the fact that he's asking shows that he probably doesn't want to be yet another stance BLEEP with 205s stretched and cambered to "fit"

While I agree with the sentiment, that word will get you pinked. Better edit it quick.

[whiterps13]

the fact that he's asking shows that he probably doesn't want to be yet another stance SNIP with 205s stretched and cambered to "fit"

lower the car, zero out camber. 17x9 +25 will allow for some beefy tires on stock fenders. 235/40 or 245/40 front, 245/40 or 255/40 rear. and if needed (depending on your tires/coilovers), small slip-on spacers up front for clearance.

go forth into the world and prosper. :2f2f:

Yeah, zero camber is so awesome bro.

17x9 +20 will barely clear coilovers on almost any setup, it even rubs on some coilovers. Put 245/255 tires on there, and reduce clearance by 5mm, and its going to rub. Why search for wheels that require spacers, when the ones you have currently will work?

[ThatGuy]

This thread is a clear knock-off of the fitment thread.

It doesn't sit flush with the forum.

:lockd: