PDA

View Full Version : FL Part out leftovers, Bride, Z brakes, 5 lug, Nardi etc etc.


Blackzenki82
10-11-2011, 11:15 AM
yeah, just a few things left, here's what i got.

first off, PM FOR FASTEST RESPONSE!!!!!!

buyer pays shipping at own expense. lowballers will be ignored blah blah.

parts located in Bronson, FL, 32621 in case you want to know how far to drive for pick up on larger items.

Legit Bride Zeta II, just pulled fabric off and had em cleaned, red in color, yes, it's real, came from UpGarage in Japan, and i don't think these were ever "knocked off" anyways, includes head pillow - $450

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0030.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0035.jpg

Buddy Club sliders/side mount brackets - $150

$500 OBO for both.

Nardi deep corn w/red stiching (don't like the way it looks in the Z) - $250 OBO (will trade for a larger Nardi woodgrain wheel)

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0256.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0031.jpg

Z32 front and rear brakes, w/rotors - $250

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0227.jpg

S14 5lug swap w/CS extended studs up front, knuckles, rotors, hubs, F/R - $350 FIRM

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0222.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0223.jpg

can also offer a Z brake/5 lug swap package price

S14 Kouki tails (light fading, but all match) - $250 OBO

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0203.jpg

Zenki front, hood, fenders only, WKO pearl white, minor damage - $150 OBO

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0175-1.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0176-1.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0192.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0193.jpg

Navan front bumper (some damage) - $250

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0220.jpg

Navan side skirts (minor cracks) - $250

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0219.jpg

Navan Valences (rough) - $50

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0221.jpg

S14 subframe - $50

S14 subframe - $40

GReddy/Trust TVVC manual boost controller set at 14psi (super legit/rare) - $150 OBO

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0218.jpg

Napa small Miata battery (fits in tray beside FMIC cold pipe) - $50

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0197.jpg

S14 SE drift spares - $25 each

S14 windshield (if you get it before junkers come) - $75!!

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0217.jpg

S14 shell, hit in back corner, clean title, do what you want with it, no upper core support - $50 or the junkers get it.

1996 Zenki grille, one broken tab, get rid of that dog piss 95 grill - $50

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0177.jpg

S14 non ABS 5spd driveshaft - $100

S14/S14 lower 5spd shifter boot with metal retainer ring - $20

S14 Kouki base seats - $150 OBO

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0206.jpg

http://i30.photobucket.com/albums/c336/gainesville_guy2001/IMG_0209.jpg

GReddy SR turbo elbow, with bung for smaller o2 sensor welded on - $100 FIRM

SR down pipe w/tranny braket/bushing - $60


i am accepting trades, but i don't have a 240SX anymore, shit like radios (double din w/nav preferred), xbox 360 stuff, hand gun for the missus, Datsun S30 parts etc etc etc... just let me know, never know what i might take, doesn't have to be car parts....

rastaman
10-11-2011, 12:05 PM
sell me the lights in the navan front bumper? pm me price

Blackzenki82
10-11-2011, 12:51 PM
ready for the Junyan Lollercoatser?



hey man can u sell me just the bumper lights?

what's the offer?

15 ship 32907 lmk


HAHHAHAHHAHA



http://1.bp.blogspot.com/_5yz9IRGWcgo/TToROZovscI/AAAAAAAAA-M/bFV2NJdKXQY/s1600/kaz_hirai_laughing.jpg

rastaman
10-11-2011, 12:59 PM
^^ u said offer lol so I offered

da_crew10
10-11-2011, 02:35 PM
To do an s14 5 lug conversion on an s13 you need something else to complete it right?
Lower control arm I think?
Correct me if I'm wrong.
I'm interested in buying it that's why I ask pm me.

waxball88
10-11-2011, 03:31 PM
Those Z brakes have been staring me in the face for the past few weeks. Not sure how much longer i can hold out.

JFIVE
10-11-2011, 03:50 PM
What size are the z brakesiron or aluminum? Will you ship?

sw20>>s14
10-11-2011, 05:22 PM
What size are the z brakesiron or aluminum? Will you ship?

they're aluminum, but not sure on size...

OP, they do fake zeta IIs, but yours is legit. bump for some nice stuffs

rangerjavi
10-11-2011, 05:41 PM
Bump for some nice base kouki seats.

DeanGrind
10-11-2011, 05:43 PM
Still have seats? I'm located probably about an hour from you.. PM me a pick up price?

Mitsubayati
10-11-2011, 07:10 PM
To do an s14 5 lug conversion on an s13 you need something else to complete it right?
Lower control arm I think?
Correct me if I'm wrong.
I'm interested in buying it that's why I ask pm me.


s14 lower ball joint for flca on either s14 flca or s13 flca. s14 tie rod ends. s14 knuckle. maybe s14 inner tie rod if s14 outer doesn't thread onto your s13 inner. gl

Blackzenki82
10-11-2011, 08:59 PM
To do an s14 5 lug conversion on an s13 you need something else to complete it right?
Lower control arm I think?
Correct me if I'm wrong.
I'm interested in buying it that's why I ask pm me.

your answer is below...

Those Z brakes have been staring me in the face for the past few weeks. Not sure how much longer i can hold out.

don't i know you? like personally? if so, i can hook up the price for you man, just LMK if you want em, might be able to get em in your budget for you.

they're aluminum, but not sure on size...

OP, they do fake zeta IIs, but yours is legit. bump for some nice stuffs

i'll check on size, but no one's gonna know any difference between 26mm, and 30mm... barely anyone will actually push them to thier full capabilities, and if they are, most would opt for a set of brembos/stop techs/etc etc

if you know where i can find a red Zeta II replica, let me know ASAP, so i can keep mine!!! all i can see to find is those Zeta III's, and those are for fat americans, the Zeta II is perfect for a 30-32" waist, like god him/herself has a grip on you, i know, i threw my car into a wall at 50mph, and barely moved a half inch in the seat.

Still have seats? I'm located probably about an hour from you.. PM me a pick up price?

same deal as above, i think i know you, if i do, i can work you on the price of the seats man, just PM me if you're serious.

s14 lower ball joint for flca on either s14 flca or s13 flca. s14 tie rod ends. s14 knuckle. maybe s14 inner tie rod if s14 outer doesn't thread onto your s13 inner. gl

thanks for informing everyone, i could have sworn with all the knuckles, that it was a direct swap... i could break em down to just the hubs and rotors, but it wouldn't be much a difference in price, as i have to work more to get em that way.

Okinawandrifter87
10-11-2011, 10:46 PM
Did you live in Nor cal at one point? Think I met you at a meet a while back if so.. any who.. How much would shipping be on the brakes to 29906? Thanks.

VYKTR
10-11-2011, 11:03 PM
If you are willing to trade I have this... http://zilvia.net/f/sale-items/410768-fs-wtt-360mm-nardi-woodgrain-w-horn.html It's a legitimate Nardi so I hope yours is too. Let me know if you are interested.

travisty_
10-12-2011, 04:38 AM
Sent you a PM regarding the god's hand seat. Lol.

Blackzenki82
10-12-2011, 10:03 AM
Did you live in Nor cal at one point? Think I met you at a meet a while back if so.. any who.. How much would shipping be on the brakes to 29906? Thanks.

i could ship, at your expense, but due to weight it'd be $$$, lmk. never been to cali BTW, unless you've been to FL and seen this dude...

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/292263_2022607360243_1095720274_31970454_6152283_n .jpg

.....i'm not sure if we've met.

If you are willing to trade I have this... http://zilvia.net/f/sale-items/410768-fs-wtt-360mm-nardi-woodgrain-w-horn.html It's a legitimate Nardi so I hope yours is too. Let me know if you are interested.

thank god, that's the exact wheel I'm looking for to put in my Z, i put my nardi in, too small and "modern" for my 40 year old interior. i'll trade you in a heartbeat, just let me know....

oh, and mine is legit as well.

Sent you a PM regarding the god's hand seat. Lol.

an item like that, I'd rather not ship, unless you REALLY made it worth my while...

zz_kouki_zz
10-12-2011, 12:07 PM
Hey bro do you have OEM kouki bumper?

sharpe_corners
10-12-2011, 01:20 PM
PM price shipped on the skirts please!
L8E 3L3 CANADA

Thanks so much!

sw20>>s14
10-12-2011, 03:05 PM
if you know where i can find a red Zeta II replica, let me know ASAP, so i can keep mine!!! all i can see to find is those Zeta III's, and those are for fat americans, the Zeta II is perfect for a 30-32" waist, like god him/herself has a grip on you, i know, i threw my car into a wall at 50mph, and barely moved a half inch in the seat.



a retailer currently has them on eBay. you should be able to find them easily (no eBay links allowed, sorry). but they look like shit compared to the real ones we have. i'd steer clear of them, but thats just me.

subiwill
10-12-2011, 03:25 PM
still have that bride seat ?

gerbil is sik
10-12-2011, 07:28 PM
how much for all the navan parts?

Blackzenki82
10-12-2011, 08:12 PM
a retailer currently has them on eBay. you should be able to find them easily (no eBay links allowed, sorry). but they look like shit compared to the real ones we have. i'd steer clear of them, but thats just me.

i'd be using it as a passanger seat, so no worries on the "cheapness", as long as the "BRIDE" font on the headrests match, i'd be good.


still have that bride seat ?

yes, most of the time, if it's still listed, it's still for sale, i'm usally pretty good about taking stuff down as it goes out.

how much for all the navan parts?

add up all the prices, and make me a reasonable offer through PM.

genericforumname
10-19-2011, 08:58 PM
tried to send PM, says box is full. have an offer for seat+navan+brakes

RB25 ZENKI
10-19-2011, 09:08 PM
how much for Navan Bumper shipped to 78228?

drdre
10-19-2011, 09:08 PM
your inbox full interested in your z32 brakes pm me i'l pick them up from your doorstep!

Prez
10-20-2011, 12:29 AM
wanna sell that super cool hellaflush skateboard jawn jawn

sharpe_corners
10-24-2011, 11:11 PM
Whats your best price shipped on the skirts to

2795 Barton St East, Hamilton ONTARIO CANADA
L8E 3L3

I have paypal waiting.

Thanks alot.

snofufu
10-25-2011, 01:43 AM
how much to ship the 5lug swap z32 brake set up to 89102?

genericforumname
10-25-2011, 01:48 AM
really hard to make offers on things when you're inbox is full. I'll be within 15 minutes or so of bronson this weekend visiting my grandparents. let me know whats up.

youngfab59
10-25-2011, 02:51 AM
Z32 brakes shipped to 33334? Thanks.

Blackzenki82
10-25-2011, 10:01 AM
tried to send PM, says box is full. have an offer for seat+navan+brakes

cleared some space, lmk what's good...

VYKTR
10-27-2011, 10:00 PM
Hey Marshall. I sent out the Nardi Woodgrain today. I was going to PM you the confirmation number but your inbox is full. Clean it out homie :-D

AmirM24
11-07-2011, 11:37 AM
do you still have the zeta II and nardi? lmk

hks4life
11-07-2011, 12:07 PM
Would love to have that zeta, or maybe just thenpillow for my zeta 1

Blackzenki82
11-07-2011, 01:04 PM
seat is still available, Nardi is no longer available...

skimattybee
06-06-2012, 10:35 PM
interested in the steering wheel and hub..what hub adapter is that? ive got a ton of s30 parts to trade if you still have it

skimattybee
06-06-2012, 10:36 PM
oh shoot, just saw that its gone :/

Trinidrift3
06-07-2012, 08:21 PM
bump for you


are the z32's only calipers and rotors?

Blackzenki82
06-08-2012, 05:29 PM
check the date of the thread, everything is long gone now.


mods, please close this thread so I stop getting PM's on stuff i sold over a year ago...

SuperBlackS14
06-08-2012, 06:05 PM
Great price for Z32s. Front Left Fender (if its Zenki) shipped to 12203?

Blackzenki82
06-08-2012, 06:09 PM
fucking christ......

SuperBlackS14
06-08-2012, 06:11 PM
Sorry I missed that. My bad