Sil-Eighty SE-K
10-10-2011, 06:03 PM
I have a BRAND NEW in the box AEM EMS version 2 AEM part no. 30-6620
(EDIT..... VG30 NOT VQ)
This AEM EMS works on the following applications:
-ALL Skyline engines up to 1998 (r32/r33) RB20, RB25, RB26
-Z32 300zx turbo or non (90-95)
-S14 SR20DET (zenki 94-96)
-ALL CA18DET
-92-94 maxima ve30de
This unit has never been used..... still has the safety seal across the connector.
PLUG AND PLAY
MSRP is $2,497
Looking for $1,500 SHIPPED!!
FEATURES:
The AEM software is extremely versatile and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition. This is a top of the line Engine Managment System.
Plugs directly into the factory harness. No rewiring necessary.
Uses all the factory sensors.
Includes start up calibrations.
System is fully enabled and unlocked - Never pay for upgrades!
Context sensitive help eases tuning process.
Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
Runs on Windows-compatible software.
Up to 12 peak and hold injector drivers.
Up to 8 direct-fire coil outputs.
Up to 16 general-purpose outputs.
Up to 8 definable switch inputs.
Up to 4 EGT inputs with fuel trim.
1MB of internal data logging.
Electronic boost control.
Full idle control.
Programmable traction control.
Software definable knock control.
Two step launch control.
User configurable soft-cut rev limiters.
Wet or dry nitrous control.
Tune using new USB communication port or serial port
works with all AEM gauges
http://img705.imageshack.us/img705/4959/img3711y.jpg
http://img834.imageshack.us/img834/3903/img3710j.jpg
http://img207.imageshack.us/img207/1827/img3712r.jpg
(EDIT..... VG30 NOT VQ)
This AEM EMS works on the following applications:
-ALL Skyline engines up to 1998 (r32/r33) RB20, RB25, RB26
-Z32 300zx turbo or non (90-95)
-S14 SR20DET (zenki 94-96)
-ALL CA18DET
-92-94 maxima ve30de
This unit has never been used..... still has the safety seal across the connector.
PLUG AND PLAY
MSRP is $2,497
Looking for $1,500 SHIPPED!!
FEATURES:
The AEM software is extremely versatile and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition. This is a top of the line Engine Managment System.
Plugs directly into the factory harness. No rewiring necessary.
Uses all the factory sensors.
Includes start up calibrations.
System is fully enabled and unlocked - Never pay for upgrades!
Context sensitive help eases tuning process.
Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
Runs on Windows-compatible software.
Up to 12 peak and hold injector drivers.
Up to 8 direct-fire coil outputs.
Up to 16 general-purpose outputs.
Up to 8 definable switch inputs.
Up to 4 EGT inputs with fuel trim.
1MB of internal data logging.
Electronic boost control.
Full idle control.
Programmable traction control.
Software definable knock control.
Two step launch control.
User configurable soft-cut rev limiters.
Wet or dry nitrous control.
Tune using new USB communication port or serial port
works with all AEM gauges
http://img705.imageshack.us/img705/4959/img3711y.jpg
http://img834.imageshack.us/img834/3903/img3710j.jpg
http://img207.imageshack.us/img207/1827/img3712r.jpg