PDA

View Full Version : CA can i barrow someones Steeringwheel Puller

wjk0817
10-05-2011, 06:56 PM
Located in socal,
I need to readjustment my steerwheel
ship2236
10-05-2011, 07:46 PM
U can rent one from
Autozone for $20 and get ur money back upon it's return
revcyanide
10-05-2011, 07:53 PM
hold the steering wheel + extensions and ratchet, its not hard at all.
blueshark123
10-05-2011, 09:09 PM
U can rent one from
Autozone for $20 and get ur money back upon it's return


yea do this.
silverarrow27
10-05-2011, 09:10 PM
Be a man and just rock the steering wheel loose. Be sure to leave the nut on at the tip so the steering wheel doesn't come flying at your face.
Renelovesnike
10-05-2011, 09:15 PM
Be a man and just rock the steering wheel loose. Be sure to leave the nut on at the tip so the steering wheel doesn't come flying at your face.

This can strip the threads. just do it right with the free rent 20 dolla autozone puller and you wont have to worry about anything striped =]
TheRealSy90
10-05-2011, 09:16 PM
Common bro muscles bro bro.
http://www.pure-african-mango-extract.com/sites/default/files/111111.jpg
silverarrow27
10-05-2011, 09:21 PM
This can strip the threads. just do it right with the free rent 20 dolla autozone puller and you wont have to worry about anything striped =]

I understand about your concern, I've done this on all my s13s I've ever owned which is about six total and went through a couple steering wheel changes on each vehicle. Never had stripped threads, I can screw the nut off and on when loose with one finger. It would take a hammer to strip the threads.
foxystyle
10-05-2011, 09:23 PM
MAN UP BRO. my little 100 lbs gf installed my wheel/qr/hub once as a suprise present.
s14gmo
10-05-2011, 10:31 PM
Yank that sh!t off bro!!
rb25_s13*CHUKI
10-06-2011, 12:10 AM
just pull that shit!!
David48
10-06-2011, 06:53 AM
Don't be a pansy. Just keep hitting the wheel at the 12, 3, 6, and 9 positions and it'll loosen itself. Then you just pull it off. No need to go anywhere or rent anything or pay any money. I've done it more times than I can count and it's never messed anything up, ever.
blueshark123
10-06-2011, 07:33 AM
On a 240sx it is real easy to pull the wheel off just leave the nut screwed in a bit so you dont smack urself when the wheel pops loose. I had to remove wheels from some cars that were fucking impossible to remove without tools, also if you have a aftermarket hub you need the tool to pop it out since u have no where room to pull from.
Eyegazm
10-06-2011, 07:57 AM
my little 100 lbs gf installed my wheel/qr/hub once as a suprise present.

Sounds like a keeper.
bataangpinoy
10-06-2011, 08:05 AM
dude.. the shit should just slide off with a proper pull.
Edwin562
10-06-2011, 08:20 AM
what everyone says.. lol loosen nut, give it a couple of pulls and there, steering wheel is out...
CrimsonRockett
10-06-2011, 08:33 AM
U can rent one from
Autozone for $20 and get ur money back upon it's return

Probably the most convenient option for the OP if he doesn't want to risk stripping the threads.

:lockd: