rb problems questions

[lgsr20swap]

I am having problems getting my s13 w/rb20 swap.

Question 1

I took off the cam sencor without putting cyclinder one in top dead center and dont know if i was suppost to put cam sencor back a certin way. i did notice that ther is a couple of marks on the sencor itself and the shaft on the sencor.

Question 2

i Have changing the engine harness and car (http://zilvia.net/f/#) harness and drained all the coolent out of the car and took the raditior out to gain some more room to do it. and now i have everything all together and was wondering if it would not start cause no fluid.
http://cdn1.zilvia.net/images/zilvia/statusicon/user_online.gif http://cdn1.zilvia.net/images/zilvia/buttons/report.gif (http://zilvia.net/f/report.php?p=4284969) http://cdn1.zilvia.net/images/zilvia/misc/progress.gifI am having problems getting my s13 w/rb20 swap.

Question 1

I took off the cam sencor without putting cyclinder one in top dead center and dont know if i was suppost to put cam sencor back a certin way. i did notice that ther is a couple of marks on the sencor itself and the shaft on the sencor.

Question 2

i Have changing the engine harness and car (http://zilvia.net/f/#) harness and drained all the coolent out of the car and took the raditior out to gain some more room to do it. and now i have everything all together and was wondering if it would not start cause no fluid.
http://cdn1.zilvia.net/images/zilvia/statusicon/user_online.gif http://cdn1.zilvia.net/images/zilvia/buttons/report.gif (http://zilvia.net/f/report.php?p=4284969) http://cdn1.zilvia.net/images/zilvia/misc/progress.gif
I am having problems getting my s13 w/rb20 swap started.

Question 1

I took off the cam sencor without putting cyclinder one in top dead center and dont know if i was suppost to put cam sencor back a certin way. i did notice that ther is a couple of marks on the sencor itself and the shaft on the sencor.

Question 2

i Have changing the engine harness and car harness and drained all the coolent out of the car and took the raditior out to gain some more room to do it. and now i have everything all together and was wondering if it would not start cause no fluid.
http://forums.240sxone.com/images/misc/progress.gif

[lgsr20swap]

Thanks u guys r alot of help. Got more responses on 240sxone

[Ramonesfreak2010]

Question 2: Yes it'll start. Is it smart to start it up without a radiator? NO!

Question 1: The way I did it on my SR was to crank the engine by hand til the markings on the chain/cams/TDC marking on the crank pulley match, then follow instructions in FSM to install the cam sensor...

Search! I googled the first question and got the answer.

Your welcome. :)