mwilloughby87
09-30-2011, 10:46 AM
FS 1995 240sx Rolling Shell Track Car
Name: Matt Willoughby
Location: Smyrna
Items: See Title and Desc.
Price: 2500 obo
Contact info: post, pm, or email me at [email protected]
Well....I just don't have any time to mess with the thing anymore....had planned on putting an sr back in it and beating the hell out of it on the track, but there's no more motivation.
With that being said, I am selling my beloved chassis....
The chassis has 290k miles on it.....The underbody is about as rust free as you'll find one for...iirc it has one or two patches that had some surface rust....i sanded it off and undercoated over it.
The car is 5 lug with j30 lsd
6 point cage built by Chris (Javajoe) at carma and it is fantastic. It comes with removable door bars as well.
The car has BRIDE headliner
Engine bay has mini tubs in it which I mainly did for looks, but it does allow for a lot more clearance for bigger tires should someone decide to go that route.
With the shell, you will be getting everything to put the interior back together...door panels, plastics, rear seats, ( don't have the fronts anymore, sorry), gauge cluster, glove box, carpet, etc.
Keep in mind the car was stripped down to nearly nothing . The cage will allow you to run full interior as well which was one of my big things. The only things I can think of offhand that the car will need is the brake hardlines, as I was going to run custom lines all the way back, and the car was setup for custom fuel lines as well, so you would want to either make some or buy some from a junkyard.
All of the factory wiring for the car is in tact, however it is a bit of a mess. Nothing has been cut, however the fusebox has been disassembled since I was going to run minimum wires anyways. Easy fix for this is if you don't like wiring, you could go to a junkyard, and get the wiring from the fusebox back and just swap it out.
The car is also equipped with some ISIS suspension arms.
Bodywork was in process when I decided to quit the project so it is halfway finished. The front and rear glass are out of the car, but they will be included with the sale.
If you are serious about building a track car, this one is already off to a good start, and with a simple motor swap, and some wiring finished up, it could be good to go.
If you have any questions, post in here and let me know, or msg me or whatever.
If I get close enough to my asking price, you can have my aero as well....side skirts, rear bumper, and s14.5 fenders.
Few misc. pics I have of the car. If there is anything specific you would like to see, let me know and I will get pics of it as soon as I can.
Thanks for looking.
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143453.jpg
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143501.jpg
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143507.jpg
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143525.jpg
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143537.jpg
I'll try and snag a few more pics of it over the weekend, so like I said, if you want anything specific let me know and I'll get a pic for you.
Name: Matt Willoughby
Location: Smyrna
Items: See Title and Desc.
Price: 2500 obo
Contact info: post, pm, or email me at [email protected]
Well....I just don't have any time to mess with the thing anymore....had planned on putting an sr back in it and beating the hell out of it on the track, but there's no more motivation.
With that being said, I am selling my beloved chassis....
The chassis has 290k miles on it.....The underbody is about as rust free as you'll find one for...iirc it has one or two patches that had some surface rust....i sanded it off and undercoated over it.
The car is 5 lug with j30 lsd
6 point cage built by Chris (Javajoe) at carma and it is fantastic. It comes with removable door bars as well.
The car has BRIDE headliner
Engine bay has mini tubs in it which I mainly did for looks, but it does allow for a lot more clearance for bigger tires should someone decide to go that route.
With the shell, you will be getting everything to put the interior back together...door panels, plastics, rear seats, ( don't have the fronts anymore, sorry), gauge cluster, glove box, carpet, etc.
Keep in mind the car was stripped down to nearly nothing . The cage will allow you to run full interior as well which was one of my big things. The only things I can think of offhand that the car will need is the brake hardlines, as I was going to run custom lines all the way back, and the car was setup for custom fuel lines as well, so you would want to either make some or buy some from a junkyard.
All of the factory wiring for the car is in tact, however it is a bit of a mess. Nothing has been cut, however the fusebox has been disassembled since I was going to run minimum wires anyways. Easy fix for this is if you don't like wiring, you could go to a junkyard, and get the wiring from the fusebox back and just swap it out.
The car is also equipped with some ISIS suspension arms.
Bodywork was in process when I decided to quit the project so it is halfway finished. The front and rear glass are out of the car, but they will be included with the sale.
If you are serious about building a track car, this one is already off to a good start, and with a simple motor swap, and some wiring finished up, it could be good to go.
If you have any questions, post in here and let me know, or msg me or whatever.
If I get close enough to my asking price, you can have my aero as well....side skirts, rear bumper, and s14.5 fenders.
Few misc. pics I have of the car. If there is anything specific you would like to see, let me know and I will get pics of it as soon as I can.
Thanks for looking.
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143453.jpg
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143501.jpg
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143507.jpg
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143525.jpg
http://i1001.photobucket.com/albums/af134/mwilloughby87/IMG_20110831_143537.jpg
I'll try and snag a few more pics of it over the weekend, so like I said, if you want anything specific let me know and I'll get a pic for you.