Tilton Pedal box 72-680 , Master Cylinders and More

[tiale11]

1) Tilton floor mounted pedal box 72-680
Test fitted but never used. 3/8" Balance bar and hardware included. 1 Significant scratch caused by the return spring of the throttle pedal (see pic#2 below)

2) Tilton Throttle Linkage System 72-790
New and never used. Also comes with the Throttle cable

3) Tilton Brake Balance Bar Coupler 72-560
New and never used. Comes in original box. You will need it if you use a remote bias adjuster

4) Tilton 7/10" bore 75 Series Master Cylinder 75-700U (1)
New never used. Comes in original box containing all mounting hardware and other reservoirs

5) Wilwood 5/8" bore Compact Combination Master Cylinder 260-10371 (2)
New never used. Comes in original box containing all mounting hardware and other reservoirs

In total, you will get all this from stores at around $900 without shipping. I will sell it all for $750 without shipping or fees. I prefer selling it as a whole but may part it out if the price is right.

Contact me via e-mail at [email protected]

https://lh4.googleusercontent.com/-mg2wa4MKk8w/TijaysSBFVI/AAAAAAAAECs/o_um8-8eB34/s720/IMG_6543.JPG

https://lh3.googleusercontent.com/-y6IiTgUKWVo/TijazOFimgI/AAAAAAAAECw/PBuEClkXjAw/s720/IMG_6544.JPG

https://lh3.googleusercontent.com/-VwNsudPZZeY/Tija1LLeikI/AAAAAAAAEC0/LE7yphV_UMI/s720/IMG_6545.JPG

https://lh6.googleusercontent.com/-X1MPWJXnohk/Tija1pRLRwI/AAAAAAAAEC8/hYWiMOhu848/s720/IMG_6546.JPG

https://lh6.googleusercontent.com/-ecFm-6ym00E/Tija2buYAmI/AAAAAAAAEDA/nyMciJJ19SA/s720/IMG_6547.JPG

https://lh6.googleusercontent.com/-NblZc8mqYDo/Tija2-VK-NI/AAAAAAAAEDE/tXGKSUTqv-k/s512/IMG_6548.JPG

https://lh6.googleusercontent.com/-8QsGEXbzQHM/Tija3iRLbqI/AAAAAAAAEDI/Nx_i40Vf0DY/s512/IMG_6549.JPG

https://lh6.googleusercontent.com/-eJTEbBS9HOc/Tija5OEJR3I/AAAAAAAAEDM/LD2-gJZ6cxs/s720/IMG_6550.JPG

https://lh6.googleusercontent.com/-uk-zJ1OonF4/Tija5gETtmI/AAAAAAAAEDQ/nCj-_MahU1k/s720/IMG_6551.JPG

https://lh6.googleusercontent.com/-P_K0KI079ws/Tija6LEBA4I/AAAAAAAAEDU/w_HkHY2B2GY/s720/IMG_6552.JPG

https://lh4.googleusercontent.com/-eXQ9LFKldRM/Tija6if5auI/AAAAAAAAEDY/i6EvjSPDurA/s720/IMG_6553.JPG

https://lh3.googleusercontent.com/-c4A_fHP4Fc0/Tija7NGqs9I/AAAAAAAAEDc/VMfgXUGKS3o/s720/IMG_6554.JPG

https://lh6.googleusercontent.com/-QxLIDXlaMp0/Tija7RCcFhI/AAAAAAAAEDg/OwWwy49WcPQ/s720/IMG_6555.JPG

[brokeAs240sx]

Any test fit pictures?

Floor mounted looks like it will put the pedals too close on an s-chassis.

[tiale11]

This is as much fitment test as i did.... well, i later did with with my Kirkey racing seat mounted. Fitment was good with stock seat but because i am sitting pretty much on the floor with the racing seat, i needed to push back the pedals abit but had no more room to spare. This is with a Z32 btw.

I cannot speak for the s-chassis as i never sat in one but I can tell you that another Z32 owner is using a floor mounted box in his Z.

https://lh3.googleusercontent.com/-loxlSoBuwvE/TeZf-E0sbEI/AAAAAAAADr4/TCE0UgZkjQ0/s720/IMG_3933.JPG