1 WEEK ONLY!! KA24E!! Help me Get rid of it!!

[90S13hatch_tony]

:trogdor:looking to get rid of my stock ka24e motor and tranny im planning on doing a DE swap so i no longer need the engine or tranny...

i will trade for parts like clutch pedal, clutch master cylinder, slave cylinder, brake pedal, power steering lines, manual driveshaft, manual s13 clutch hardlines, engine harness, body wiring harnes with fuse boxes....etc i will also accept bucket seats with a 5 or 6 pt harness with rails

will send pics on request, let me know what you need

you can contact me at (323)774-7149 :trogdor:

[h2v7]

so the sohc is auto?

[90S13hatch_tony]

so the sohc is auto?

yes it is auto tranny

[90S13hatch_tony]

Close!! Close!! Closee!!

[muffler]

bought harness, legit seller thanks!

[90S13hatch_tony]

i have a 1990 KA24E engine and tranny for sale
it runs strong for its year,
i also have i ka24E maf sensor, ecu, and stock exhaust (beefy but not like super jdm)
i will sell everything for $400 OBO that means i would include engine, tranny, exhaust, ecu, lower harness, speed sensor...etc
i do not have the engine harness because its sold

i also have a INVIDIA EXHAUST w/ custom straight pipe for $350 obo its made to fit on a sr or KADE piping alone was $200 and the muffler was $500...if you dont believe me here is the link
Invidia G200 Exhaust - a-spec tuning - high performance auto parts & accessories (http://www.aspectuning.com/invidia/invidia_g200_exhaust/hs94ns4g2t/i-93130.aspx)
...... the tip did get smashed but for $ 60 bucks more ill get it fixed for you....if no one takes it itll be going into my ka.

Help me swap in my 95 Ka24DE into my s13 hatch!!
i will consider trades for parts for TWIN CAM ONLY!!
such as:
DE interior body wiring harness, 5 spd complete swap w/ harnesses, injectors, throttle cable, power steering lines,...etc

Mostly anything that can aid me in getting my car running again

http://i31.photobucket.com/albums/c380/antho_y/082511154347.jpg
http://i31.photobucket.com/albums/c380/antho_y/082511154356.jpg
http://i31.photobucket.com/albums/c380/antho_y/082511154339.jpg
http://i31.photobucket.com/albums/c380/antho_y/jjjll.jpg
http://i31.photobucket.com/albums/c380/antho_y/jjjj.jpg
http://i31.photobucket.com/albums/c380/antho_y/hashs.jpg
http://i31.photobucket.com/albums/c380/antho_y/mknjn.jpg
Zilvia! KA24E!! FOR SALE - YouTube (http://www.youtube.com/watch?v=283PvM52RuA)


SOCAL LOCALS ONLY... UNLESS You Pay for SHIPPING

call or text me at (323)774-7149 my name is Anthony
pm me or email me at [email protected]

[90S13hatch_tony]

CLOSE!!!CLOSE!!!close!!

[90S13hatch_tony]

i have a couple of things for sale for s13/s14's

first i have is a s14 or s13 exhaust Manifold w/ down pipe....asking $75 obo
- it is welded at the downpipe

second i have S13/S14 pressure plate and Clutch....asking $50 obo- both in good condition, the bad is that they are rusted over because they were accidently left in the rain...clutch is still beefy tho
-will need to be resurfaced

next i have a 1990 Sohc engine and auto tranny (both still in the car)...asking $300 obo or $200 if you pull it yourself
- engine has about 220k......10k a year over a 20 yr span with no leaks or knocks
-the tranny has the same milage.. bad is that it pops into the gears when it shifts at about 3200 RPM's
- no engine harness but i do have the ecu and maf sensor

next i have a tranny throw bearing... asking $25 obo
-also rusted over

last i have a s13 starter asking $30 obo

http://i31.photobucket.com/albums/c380/antho_y/exhaust.jpg
http://i31.photobucket.com/albums/c380/antho_y/pressure.jpg
http://i31.photobucket.com/albums/c380/antho_y/pressure2.jpg
http://i31.photobucket.com/albums/c380/antho_y/clutch.jpg
http://i31.photobucket.com/albums/c380/antho_y/clutch2.jpg
http://i31.photobucket.com/albums/c380/antho_y/driveshaft.jpg
http://i31.photobucket.com/albums/c380/antho_y/bearing.jpg
http://i31.photobucket.com/albums/c380/antho_y/082511154339.jpg
http://i31.photobucket.com/albums/c380/antho_y/082511154356.jpg
http://i31.photobucket.com/albums/c380/antho_y/082511154347.jpg

lmk what you think.. ill even considern trades for 5speed parts like, shifter assembly complete, clutch pedal, master and slave cylinders, tranny harness, speed sensor, clutch hardlines, DOHC p/s lines, Manual DRIVESHAFT, 5spd crossmembers, mounts...etc

will consider to ship only little parts off the engine or tranny.. NO LARGE OR HEAVY SHIPPING!!!

please no FLAKES!!

i am in POMONA, CA 91767

Name is ANTHONY
-can call or text at (323)774-7149

[90S13hatch_tony]

Hey guys, I have a 1990 stock Ka24E engine and Tranny that I'm parting out. Everything on engine and Tranny is for sale except tranny harness, clutch fan, alternator and a few hoses but other than that its up for grabs

Lmk if you need anything SOHC
TEXT or call (prefer text).....(323)774-7149
Name is Anthony

[90S13hatch_tony]

I have a Ka24E that i am finally pulling out of my car tomorrow and the following day 9/26/11- 9/27/11

i need gone as soon as possible,

its 99% complete all that is missing is the engine harness and thats it..
i am including engine, tranny, ecu, d-shaft, crossmember...etc

i need to sell asap!!!
I am asking $450 obo
i will also take trades for 5speed swap parts or (complete swap) comes out to the same price as a full swap!


****also looking for a s14 top timing chain cover and knock sensor and s13 tranny dust plate****


PlEASE HELP ME GET RID OF IT!!!

MY name is Anthony
Text or call at (323)774-7149

will send pics if interested

[wangan_cruiser]

bump msgs length