choleaoum
09-25-2011, 01:34 AM
Reposted from E46Fanatics
Hey, so since I realized I really don't drive my car at all lol. I want to sell the rims and hopefully get into the market for something else. I was going to rebuild them and make them into super duper aggressive ass wheels but I didn't realize how busy I would get during school. I have a motorcycle, so I have not driven my car much, or used up the tires. No bends, brake dust build up, pits, cracks, holes, etc.
But time to cut to the chase, they are 19x8/10, offsets are unknown because iForged doesn't release it's offsets. There are some slight peeling of the finish on the faces the size of a quarter, and minor dings in the lip from curbage on one of the rear rims (been repaired). Other then that the rims are fine, the lips will be repolished tommarow morning. They sit pretty flush considering I'm rubbing on a 255/35/19 tire, fronts are 235/35/19. The tire life is still good, no crazy camber wear, I would estimate about 75% life honestly maybe even more.
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9584.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9556.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9500.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9676.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9663.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9625.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9599.jpg
The fronts, about a ~1.5 - 2" lip.
The rears, about a ~2.5 - 3" lip.
I am asking 2300$ with tires, 2000$ without tires. You guys know how much iForged wheels are worth, and please if you don't like iForged or have something bad to say leave it out. I wouldn't go into your threads bashing your sales so please don't do that to mine lol.
As for the peeling faces, they are only the size of a quarter but I can offer a full polished face for free (I will do it myself by hand) or if you're willing to pay 400$-500$ ish to have it powdercoated, I can refer you to someone. I'm sure there are cheaper powder coating alternatives that someone else can recommend. Or hell, I will even lend a hand touching it up. I'm a fairly good painter.
I will trade for 5x120 any other 19 inch 2 or 3 piece wheels, such as VSXX, BBS LMs, VSTX, etc. Offset or width doesn't matter as long as there 19's & 2 or 3 piece. No replica wheels please!
Feel free to PM me anytime or contact me anytime. And yes, these pictures were before my coilovers lol.
Please vouch for me on here if you can, I know theres a lot of you that I have had the pleasure of doing business with!
Location is Long Beach, CA. Shipping is available, buyer pays for shipping. (Although I would prefer not too that is why I posted it in the California)
I am in no rush to sell these rims.
Hey, so since I realized I really don't drive my car at all lol. I want to sell the rims and hopefully get into the market for something else. I was going to rebuild them and make them into super duper aggressive ass wheels but I didn't realize how busy I would get during school. I have a motorcycle, so I have not driven my car much, or used up the tires. No bends, brake dust build up, pits, cracks, holes, etc.
But time to cut to the chase, they are 19x8/10, offsets are unknown because iForged doesn't release it's offsets. There are some slight peeling of the finish on the faces the size of a quarter, and minor dings in the lip from curbage on one of the rear rims (been repaired). Other then that the rims are fine, the lips will be repolished tommarow morning. They sit pretty flush considering I'm rubbing on a 255/35/19 tire, fronts are 235/35/19. The tire life is still good, no crazy camber wear, I would estimate about 75% life honestly maybe even more.
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9584.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9556.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9500.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9676.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9663.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9625.jpg
http://i419.photobucket.com/albums/pp272/choleaoum/DSC_9599.jpg
The fronts, about a ~1.5 - 2" lip.
The rears, about a ~2.5 - 3" lip.
I am asking 2300$ with tires, 2000$ without tires. You guys know how much iForged wheels are worth, and please if you don't like iForged or have something bad to say leave it out. I wouldn't go into your threads bashing your sales so please don't do that to mine lol.
As for the peeling faces, they are only the size of a quarter but I can offer a full polished face for free (I will do it myself by hand) or if you're willing to pay 400$-500$ ish to have it powdercoated, I can refer you to someone. I'm sure there are cheaper powder coating alternatives that someone else can recommend. Or hell, I will even lend a hand touching it up. I'm a fairly good painter.
I will trade for 5x120 any other 19 inch 2 or 3 piece wheels, such as VSXX, BBS LMs, VSTX, etc. Offset or width doesn't matter as long as there 19's & 2 or 3 piece. No replica wheels please!
Feel free to PM me anytime or contact me anytime. And yes, these pictures were before my coilovers lol.
Please vouch for me on here if you can, I know theres a lot of you that I have had the pleasure of doing business with!
Location is Long Beach, CA. Shipping is available, buyer pays for shipping. (Although I would prefer not too that is why I posted it in the California)
I am in no rush to sell these rims.