s14 starting problems

[s14k]

i have a s14 with a notchtop sr20. I just rubbed through the engine harnes in the fenderwell. i repaired all the wires, replaced all the fuses and the car wont start. i am getting fuel to the rail. i have tried replacing the igniter and checking the coil packs. everything seems to be ok. i am not sure what else to check. Any help would be cool.

[s14k]

any help would be great

[jr_ss]

I'm assuming it ran before the rub through? You're missing something in that area you rubbed. Make sure all your connections are solid and are to te correct wire. Ohm each wire if you have to, to make sure there continuity.

What does it do when you turn the key to start? Click, crank, anything at all?

[s14k]

it cranks and cranks and thats its. i soldered each wire one at at time

[s14k]

so apon further investigation i found several parts in the ecu had been blown