1995 240sx SR20DET GT30R AEM EMS 450hp

[ImpatientS14]

Moving on car is $8,750 obo. Very motivated seller.

Drivetrain
Redtop SR20DET (2.2 Liter)
Greddy Oil Pan
Darton Sleeves Bored to 90mm
Eagle Rods
CP Pistons
Calico Race Bearing (Crank & Rod)
New Oil Pump
Mazworx 90mm Headgasket (Copper Coated)
Comp Valve Springs
Crower Valve Spring Retainers
BC 272 Camshafts
HKS Rocker Arm Stoppers
Valve Cover Powder Coated Wrinkle Black
Real Greddy Intake Manifold (Powder Coated Wrinkle Black)
AEM 3.5 Bar Map Sensor
AEM Air Temp Sensor
Holley 80lb/Hr Top Feed Injector
Custom Top Feed Fuel Rail
Aeromotive Fuel Pressure Regulator
Aermotive Fuel Filter
2x Walbro 255lph Fuel Pumps
Aluminum Radiator
2x Electric Fans
Samco Silicon Hoses and Couplings
Spec Oversized Clutch and Flywheel
B&M Short Shifter
J30 Rear End
Wiretuck


Turbo
Precision GT3076R
Heat Blanket for Turbo
4” Intake w/K&N Filter
Tial Wastegate
Blitz BOV
Front Mount Intercooler
Custom Exhaust Manifold (Heat Wrapped)
3”Downpipe (Heat Wrapped)
Full 3” Apex N1 Exhaust

Electronics
AEM 30-1601U EMS
AEM Serial Data Gauge
AEM TruBoost Controller/Gauge
SplitFire Ignition System/COP

Chassis
Nismo Motor Mounts
Momo Competition Steering Wheel
NRG Short Hub
NRG Quick Release
Line Lock
Optima Redtop Battery
Chassis Harness Tucked under dashboard
BS Lowering Springs
Cusco Traction Bars
Nismo Shift Knob


http://img844.imageshack.us/img844/3668/img3854eh.jpg (http://img844.imageshack.us/img844/3668/img3854eh.jpg)
http://img836.imageshack.us/img836/1264/img3811cm.jpg (http://img836.imageshack.us/img836/1264/img3811cm.jpg)
http://img850.imageshack.us/img850/1924/img3852m.jpg (http://api.viglink.com/api/click?format=go&drKey=325&loc=http%3A%2F%2Fzilvia.net%2Ff%2Fcars-sale%2F393605-fs-95-240sx-built-sr-gt30r.html&v=1&libid=1316834313403&out=http%3A%2F%2Fimg850.imageshack.us%2Fimg850%2F1 924%2Fimg3852m.jpg&ref=http%3A%2F%2Fzilvia.net%2Ff%2Fsearch.php%3Fsea rchid%3D9335436%26pp%3D45%26page%3D4&title=FL%20FS%2095%20240sx%20Built%20SR%20GT30R%20-%20Zilvia.net%20Forums%20%7C%20Nissan%20240SX%20(S ilvia)%20and%20Z%20(Fairlady)%20Car%20Forum&txt=&jsonp=vglnk_jsonp_13168343166221)

[ImpatientS14]

Price lowered to 10,000.

[ZenkiLB]

More pictures please.

[ASIXMRSE]

bump for more pictures

[ImpatientS14]

Front
http://img194.imageshack.us/img194/6144/img0731mn.jpg
Back
http://img832.imageshack.us/img832/3082/img0730n.jpg
Side
http://img6.imageshack.us/img6/9033/img3854vs.jpg
Inside
http://img51.imageshack.us/img51/6136/img4043a.jpg
Dashboard
http://img16.imageshack.us/img16/5821/img4042a.jpg

[ImpatientS14]

Gauges Linelock and 2step switches
http://img687.imageshack.us/img687/9310/img3811m.jpg
Engine
http://img269.imageshack.us/img269/8325/img4039gq.jpg
Sleeved and Bored
http://img12.imageshack.us/img12/4264/img0313tu.jpg
Wiretuck
http://img33.imageshack.us/img33/8839/img3978t.jpg

[ZenkiLB]

Who did the wiretuck?

[ImpatientS14]

I did. Used Insultherm to loom the entire harness in the enginebay and everything else is tucked under the dash, with the chassis fuse box mounted with access through the passenger air bag door.

[Drftr915]

This might be a dumb question, but how can it be a 2.2 without a different crank?

[ImpatientS14]

Because to bore has been increased to 90mm and the stroke has not been changed. You can also stroke the motor, Brian Crower has a kit, and it will then be about a 2.4 liter.

[ImpatientS14]

Bump, really looking to sell this car.

[ImpatientS14]

Price lowered to $9,000.

[The_Other_Aaron]

Have you dynoed the car or is 450 just an estimate? Also was the work done by yourself or a shop? Receipts for any of the build?

[96rbs14]

^^^^^^^^ what he said^^^^^^^^^ clean clean car pm me bottom dollar

[ImpatientS14]

Car was on the dyno and tuned on the dyno which made 420hp at 20psi. Car is still running the same tune, but the motor setup is different because the block had a small crack in the sleeve of #1, which is why the block is sleeved now and bored to 90mm. I estimate that the new setup and a healthy motor should put it around 450 if not higher. Can be tuned to whatever you like, weakest link in the block is the Eagle Rods which are supposed to be good for up to 600hp.

The original setup was done by a shop as was the tune. This motor was assembled by me in my garage. I am particular about things so I didn't want to leave the build up to a shop that could cut corners. I took my time putting the motor together and using only good parts.

Sleeves were installed by Darton.

[ImpatientS14]

Bump it back to the top.

[ImpatientS14]

Price lowered tp $8,750.

[Urotrsh]

Interested in trades? Got a stanced 96 ls400

[wagonkilla]

Part engine?
408-417-5766 let me know
Very serious

[ImpatientS14]

Sorry no trades, planning on picking up a new vehicle. Not interested in parting the engine, but if you buy the motor for $8750 I'll throw in the car for free.

[ImpatientS14]

Accepting reasonable offers. The current price is so cheap considering the motor set up cost this more than the asking price alone. Bump.

[Fresh2Death]

Are the air lines still in it to eventually put heat and or air back on it ?

[ImpatientS14]

Everything ac/heat related is gone.

[325iturned240]

sell pending!!!

[325iturned240]

sold!!!! thanks again man, I'll let you know how she's doing soon haha :)