b00stinbmx
09-21-2011, 04:52 PM
well i always told myself that when i could afford haltech i was going to swap over to it, and i think the time has come for me to get rid of my nistune set up. it hasn;t seen all that much use but it works great now after i got some kinks worked out with it (ended up being a bum ecu which has been replaced now)... this set up will include the following:
z32 ECU with a Nistune Type 2 board installed.
PLMS developments Nissan Consult to usb cable, practically brand new
Nistune Individual Software License, has only been used one this one ecu. so you have 4 more to use it on.
Z32 Maf, has been working fine for me and works well with this setup since you use a z32 ecu.
so anyway heres what i spent on all of it so you can get a idea of pricing.
ecu was 150
board was 220+shipping
installing board to ecu was 50
cable was 100+shipping
Maf was 75
Software license was 200
as you can see i have roughly $795 into this. it has been used for the last few months and still works perfectly. this is a Type 2 board so not only will this worth for a rb25 but this can work for a z32 set up, or you could remove it from the ecu and run it on a few different set ups, would have to look on the nistune site for more info on that one.
im asking $650. this is taking a decent hit on it but honestly it just comes down to IDGAF anymore, i went through a lot of issues to get this to work properly and it does now, so id rather pass it on to someone who dosen;t have to go through all the crap i did to get a working set up. i honestly have no problems with the set up at all i just want some additional features that nistune dosen;t support and requires switching to full standalone. if anyone is really interested i will take pics of anything you want, i WILL ship this item at your cost. im not spliting any of it up, if you don;t want the z32 maf too bad, take it all for what im asking and then sell it, if you ask me. having a extra maf isn't a bad idea anyway since one of them crapped out on me before and i was blaming it on other problems. any questions feel free to call or txt or PM
Tyler
860-917--8955
z32 ECU with a Nistune Type 2 board installed.
PLMS developments Nissan Consult to usb cable, practically brand new
Nistune Individual Software License, has only been used one this one ecu. so you have 4 more to use it on.
Z32 Maf, has been working fine for me and works well with this setup since you use a z32 ecu.
so anyway heres what i spent on all of it so you can get a idea of pricing.
ecu was 150
board was 220+shipping
installing board to ecu was 50
cable was 100+shipping
Maf was 75
Software license was 200
as you can see i have roughly $795 into this. it has been used for the last few months and still works perfectly. this is a Type 2 board so not only will this worth for a rb25 but this can work for a z32 set up, or you could remove it from the ecu and run it on a few different set ups, would have to look on the nistune site for more info on that one.
im asking $650. this is taking a decent hit on it but honestly it just comes down to IDGAF anymore, i went through a lot of issues to get this to work properly and it does now, so id rather pass it on to someone who dosen;t have to go through all the crap i did to get a working set up. i honestly have no problems with the set up at all i just want some additional features that nistune dosen;t support and requires switching to full standalone. if anyone is really interested i will take pics of anything you want, i WILL ship this item at your cost. im not spliting any of it up, if you don;t want the z32 maf too bad, take it all for what im asking and then sell it, if you ask me. having a extra maf isn't a bad idea anyway since one of them crapped out on me before and i was blaming it on other problems. any questions feel free to call or txt or PM
Tyler
860-917--8955