240sx s13 silvia and 350Z parts

[blackdragon328]

Located in Santa barbara CA (all parts located there). I drive to LA often in a small car so I can possibly meet a buyer up somewhere between santa barbara and LA.

Cleaning out my garage and I gotta get rid of some parts that I've had stashed away for a project that never panned out. all prices are OBO but dont throw me lame offers please.


s14 fiberglass body kit - $200

S13 coupe (silvia) widebody kit without front fenders -$275 (NO SHIPPING)
-front bumper
-rear bumper
-side skirts
-rear overfenders (50mm)

http://i246.photobucket.com/albums/gg97/blackdragon328/iphoneupdatenovember090.jpg

http://i246.photobucket.com/albums/gg97/blackdragon328/IMG_0134.jpg

350Z mahle 8:1 pistons (vq35de) - SOLD

http://i246.photobucket.com/albums/gg97/blackdragon328/Mahlpistons.jpg

350Z eagle H-beam rods (vq35de) - SOLD

http://i246.photobucket.com/albums/gg97/blackdragon328/EaglePistonRods.jpg

350z VQ35DE and transmission -$375 (NO SHIPPING)
-needs rebuild after a spun bearing
-modified throttle for 240sx cable throttle
-lightened alternator & water pulley
-comes with transmission

http://i246.photobucket.com/albums/gg97/blackdragon328/frontofVQ.jpg

240sx vq35de conversion headers -$200 +shipping (the reason for that weird bend in the header below is to clear the steering column).

http://i246.photobucket.com/albums/gg97/blackdragon328/sideofVQ.jpg

http://i246.photobucket.com/albums/gg97/blackdragon328/VQ6speedtransmission.jpg

S14 stock seats - $150 (NO SHIPPING)

http://i246.photobucket.com/albums/gg97/blackdragon328/s14seat2.jpg

http://i246.photobucket.com/albums/gg97/blackdragon328/s14seat1.jpg

240sx VQ35DE conversion driveshaft -$250 +shipping

s13 coupe taillights - $60 +shipping (both)

350Z lightweight pulley (silver): -$50 shipped

R32 taillights (blue) only interested in trades for something else

I just swapped out my hubs to 5 lug and I'm going to sell my 5zigen FN01RC - $450 (id rather sell these locally)
they are 4x114.5 and are running 225s on em on a +35 offset.
I have some neo-gens on em , the rears are at 20% or so the fronts are at around 30-40%

New item:

tomei solid lifters for an sr20det (comes with shims that worked on my SR). - $150 + shipping
- 2k miles on them
- reason for removal: I went with some VVL heads so I dont need these anymore.

BC valve springs and retainers - $150 + shipping
- 2k miles on them
- reason for removal: I went with some VVL heads so I dont need these anymore.

T28 turbo with all oil and water lines, the intake hard pipes that comes off the turbo as well as the tip that comes off the intake side after the turbine (I have no idea what either of those hard lines are called). no shaft play, no problems, taken off of my sr20det since we are going to upgrade to a gtx3076. I was running it at 12psi boost. asking $350




thanks for looking


PFC Muckenhirn, USMC

[blackdragon328]

bump, make me offers...I'd like this stuff gone n some more money or parts to put into/onto my s14

[sexcii-zenki]

is the driveshaft a 1pc? whats the best youll do shipped to 07107

[blackdragon328]

is the driveshaft a 1pc? whats the best youll do shipped to 07107


yes its a 1 piece driveshaft. looks like its gonna be rougly $30 to have it shipped.

[sexcii-zenki]

yes its a 1 piece driveshaft. looks like its gonna be rougly $30 to have it shipped.

ok would u do 230 shipped?

[blackdragon328]

ok would u do 230 shipped?

I have someone who might be buying the entire VQ swap package right now but if that doesnt go through yes, I can do $230. I'll give him till the end of this week and if nothing happens I will go ahead and pm you.

[Buy My Stuff]

I wanna see the widebody kit, please.

[blackdragon328]

posted pics of several items including body kit

I wanna see the widebody kit, please.

[OoAtreyuloO]

how much for the s14 seats if go get them coming from compton?

[blackdragon328]

how much for the s14 seats if go get them coming from compton?

the price would still be $180 since I did not include shipping in it, and I have several people interested so its a firm price for now.

I will be in City of Industry tomorrow though (speed zone) if you would like me to bring them down there it might be closer for you.

[Wake]

I may be interested in the VQ and the s14 seats if they are still available.

Possibly more stuff. Would be coming from norcal to pick it up.

Is the tranny included with the VQ? I dont see a separate price listed.

[Beejis60]

yes its a 1 piece driveshaft. looks like its gonna be rougly $30 to have it shipped.

If you're near a greyhound station and the recipient is also near one, you can ship through them for balls cheap.

[blackdragon328]

I may be interested in the VQ and the s14 seats if they are still available.

Possibly more stuff. Would be coming from norcal to pick it up.

Is the tranny included with the VQ? I dont see a separate price listed.


so far yes, everything is available. The first person to hand me cash (or paypal me it) is the one who is going to get it. I have interests in some parts including the VQ setup and the S14 seats especially and the driveshaft may be sold soon but if someone picks it up locally ill give them priority as I hate dealing with shipping cuz it takes out of my workday.

yes the tranny is included with the vq. The headers however are separate (I mention this since they are on the VQ in the picture).


Beejis60, thats pretty cool. I could always look into that if someone is really interested.

[sexcii-zenki]

I noticed the shifter bracket how much more 4that?

[blackdragon328]

I noticed the shifter bracket how much more 4that?


I could do $150 and put it in the same box as the drive-shaft so basically $150 shipped. its got a little surface rust on it, as seen in the picture.

[Shehatesme42]

How much for the 3rd break lite coming from anaheim

[tryangle]

how much for the idle air switch, rods and alternator pulley? Pm me

[blackdragon328]

how much for the idle air switch, rods and alternator pulley? Pm me

The eagle rods have been sold, and I am not parting out the engine at this time. I want to see if I can sell it as a whole first before I consider parting it.


shehatesme42.....what 3rd brake light?

[cesdezSil80]

are you selling the hood?

[blackdragon328]

are you selling the hood?

no...I dont have the car anymore. just the parts that I have for sale left over.

[Shehatesme42]

Break lite on back window

[Shehatesme42]

brake lite on rear speaker panel

[jdm2191]

Damn Santa Barbra to SD bump for that

[blackdragon328]

brake lite on rear speaker panel

gotcha, no unfortunately I do not have the car anymore, all I have left are the parts that are for sale.


SB to SD is actually pretty fun, there are some great stretches of freeway with no cops n other nice cars to play with ;)

[blackdragon328]

bump, send me offers i'll totally work with people on the price... I know how awesome it is to get parts at a good price so i'll do my best (to a certain extent) on the pricing, and I want the cash to keep building my own s14 too.

also dropped the price on a few items.

[sexcii-zenki]

still want the ds just gimme a few 2recoupe $$$

[blackdragon328]

got it. I got your PM, im keeping the driveshaft aside for you for now.

[blackdragon328]

all prices lowered bump

[sexcii-zenki]

lol how much lower? im part jew

[dkkustoms]

More info on wheel specs and condition please.

[jeremyuhh]

what size are those fn01?

[blackdragon328]

lol how much lower? im part jew


lol, I can give you the shifter extension for cheaper if you want, but I have 3 bites on the driveshaft right now (you being in first as of now), so I am not going to lower that one.

jeremyuhh: what size are those fn01?

they are 17x114.5. I will have to check if its by 7.5 or 8. I am running 225s on em if I remember correctly. Sorry its a little vague, they are currently in LA (city of industry), and I will have to double check em. My best guess at the offset is +30 or +35.


dkkustoms: More info on wheel specs and condition please.

They are a factory gold color. condition is close to perfect, I have a slight curb rash on one. I will take pictures of them this friday when I head down to LA again. As I stated above, they are 17x114.5 and if I remember correctly I am running 225s on them. I do not know the offset but I would hazard a guess at +30 or +35.
The tires are Nitto neo-gens and have roughly 30% rear and 40% front. Again, I will get pictures of this on friday.


If either of you gentleman (or anyone else) wants to see them they are in City of Industry, CA and I can easily set that up, just PM me about it.

thanx for the interest

[blackdragon328]

well, I didnt get a chance to go down to LA yet. Sorry for the delay with the rim pics folks. I'll try to do it ASAP but work is a little hectic these days.


here are pics of the drive-shaft as someone requested them. it is currently pending sale. yes...one is upside down...yes...this was a mistake.


http://i246.photobucket.com/albums/gg97/blackdragon328/driveshaft.jpg

http://i246.photobucket.com/albums/gg97/blackdragon328/driveshaftpumkinend.jpg

http://i246.photobucket.com/albums/gg97/blackdragon328/driveshafttrannyend.jpg

[sexcii-zenki]

pmd!!!!!!!!!!

[Future240]

Over the 2 bump limit, you can start a new thread in 3 days.



http://zilvia.net/rules.html
Thread Bumping

You may only bump your thread TWICE. That is not 2 times a day, or two times a week. TWICE only.

A bump is constituted as any unnecessary post you make in your sale thread. This can include:
“Bump”
“To the top”
“All Pms Responded to”
“Price Drop”
Etc, etc, etc

You should utilize the PM system to answer potential buyer's questions, and you can edit your initial post to reflect any detail updates, or price changes.