anyone running rb25det @14psi ?

[tiiite_sol]

ok my english is not very good but i have a problem!
im trying too run my rb25det @ 14psi
my car is a s13 91 the motor run 7psi all STOCK with the exaust stock ...
now i have a 3 inch exaust since i have this a have problem...
the car run bad ...no idle , the motor boost at 10 psi and lak of power after 6000 rpm , and sometime a 3000rpm it run lean but at 4500 PAF rich and the car fly like a bullet
whats happen?? im not a tunner but i want to learn !!!
if someone can help me that would by appreciated .. im the first guy in canada (quebec) too make this swap and no one knows this motor !
mathieu
thx!

[tiiite_sol]

ttt

[misnomer]

You'll find a hard time getting ahold of people with that swap anywhere, it's not very common :P I'm no expert, but let's try to get out some more information

Did it run fine at 7PSI with the stock exhaust? Basically, when did you first run into this problem?

By "no idle," do you mean it stalls out unless you give it gas?

Essentially, you will want to get it running OK at the stock 7PSI before you try to increase the boost.

[alan-n]

Check for boost leaks and properly functioning MAF