LHD to RHD conversion aftermath and partout

[Clutchkick Murphy]

:coolugh:Ok, Here it goes....I completed a RHD conversion this spring and I am tired of all this S13 stuff in my basement. I Have a 1993 White Hatchback and I have a ton of stuff left over after I did my build.

Here is what I have:

Electrical:

USDM power mirrors with switch
S13 Automatic transmission harness (off of a '93 Vert)

S13 LHD Dash harness, cut after the fuse box at the floor

S13 Cruise control unit (part #18955 40F00)
Ignition coil for S13 KA

headlight motors, L & R RIGHT MOTOR SOLD
AC compressors for S13 and S14
hard lines for LHD AC (S13)
Heater Core
AC unit (under dash)
analog climate control (USDM)SOLD

rear window wiper motor
CA18DET igniter chip with clips and pigtail
SR20DET TPS (off an Automatic SR, 6 pin) SOLD
Analog DOHC gauge cluster sub harness (UNCUT, I have two)

MISC.
]
SR20 OEM intake Manifold (upper and lower)
Autometer dual pillar pod SOLD
Full LHD interior, including dash, center console, radio surround, DASH SOLD, CENTER CONSOLE LID SOLD, KICKPLATES SOLD
grey carpet, kick plates, etc.
USED KA clutch, good in a pinch, XTD, stock replacement.
Spare tire: T135/70D16 good with aftermarket wheels (not all lopsided when in use) SOLD
SR20 OEM engine pullys

Suspension

OEM tension rods (off of a JDM 180sx, in great condition)
OEM front braces (replaced with NISMO power brace) no rustSOLD
CUSCO power brace
KA24DE Automatic drive shaft with carrier bearing
CARRIER BEARING SOLD

Exterior

S13 Door handles and rods with hardware

stock rear bumper, and bumper support (White)SOLD


Random crap I forgot

Power rear view mirror (off my 93 vert)
E brake lever and cover with cable (off 180sx, with drift nob)
S13 windshield wiper cowl with weather stripping

**PLUS...I HAVE EVERY BOLT, NUT, SCREW, and CLIP known to man**
This car was a mint chassis from Georgia I bought after bootcamp, I did a full build on this car, and all the parts taken off are working and they are clean.

All parts are best offer, PLEASE text me for questions on price, since Im not at my computer much, and work off of my Droid. (989) 513-nine/1/three/2
I will send pics upon request do to so many things for sale!

I DO except trades on things I may need for my next build (1993 vert), or some random JDM stuff than may be interesting.

Thanks for reading, I hope I can help you get your projects done too!

[Clutchkick Murphy]

I also have RHD door harnesses, but theyre cut at the clips that mate to the dash harness...these can be soldered to the dash harness to work while the dash is off. These are no longer offered new from Nissan Japan :'(

[Clutchkick Murphy]

Yeah...the normal OEM one for the 1993 USDM 240:)...most parts are USDM... I gutted the entire car
to bare metal and did full JDM swap bumper to bumper... trying to recoup some money after the
build :P

[Clutchkick Murphy]

I have a hazard button....25 for the whole bit....anything else? I probably have it.

[NismoPlsr]

I also have RHD door harnesses, but theyre cut at the clips that mate to the dash harness...these can be soldered to the dash harness to work while the dash is off. These are no longer offered new from Nissan Japan :'(

Any pics of these? Are they for power windows and power folding mirrors? Asking price?

[Clutchkick Murphy]

25....anything else u need ask, probably have it.

[Clutchkick Murphy]

I have parts for power windows....and power mirrors, not power folding...those are installed on my car now....I just have all the USDM stuff that I took off the chassis

[Clutchkick Murphy]

Text me, I will send pics on request. All this stuff is really good condition. As compared to a crappy 89 rustbucket I owned...

[DamianN.]

Pm me your paypal. 25 bucks is a deal. Do you have a blank for the cluster botton that replaces the cruise control as well?

[Stev-O_S13]

How much for the LHD dash, radio surruonding, and i need the manuel shifter trim. . . . Do u also have the 5-speed engine wiring harness for a ka24e? Are you willing to ship?

[jsu1012]

I grew up in the 989 area haha. Do you have the igntion/column plastic covers for the usdm column? also what about door locks with a key?

[ChinkyChris]

PM me price on RHD defrost vent from the dash...

If you have an extra....lol

[blackcandle0]

If that front bumper has good white paint on it id like to pick that up from you.

[NM_240sx]

Free bump for great seller!

[Clutchkick Murphy]

If that front bumper has good white paint on it id like to pick that up from you.

This bumper has some scuffs but is good white pait and nissan badge text me: 9895139132

[Clutchkick Murphy]

I grew up in the 989 area haha. Do you have the igntion/column plastic covers for the usdm column? also what about door locks with a key?

I have this stuff....text me for price and shipping! 9895139132

[Clutchkick Murphy]

How much for the LHD dash, radio surruonding, and i need the manuel shifter trim. . . . Do u also have the 5-speed engine wiring harness for a ka24e? Are you willing to ship?

No engine harness, buddy cut mine when doing SR swap :-( I have 5a speed trim for dash.
LHD dash is cracked...just saying.

[Clutchkick Murphy]

I have a DOHC Engine Harness too...and a 5 speed trans harness....

[Clutchkick Murphy]

Bump....please, I need this stuff gone, and some extra cash for the holidays, I will let this stuff go for super cheap. thanks for looking

[Clutchkick Murphy]

Please buy this stuff.

[shaggy sr]

pics would help, son

[Clutchkick Murphy]

let me know what you want pics of. This is all parts I picked off of two S13's (hatch and vert) and there are still tons of parts...didn't know where to start

[Clutchkick Murphy]

PM me with any offer for payment or trade...need these gone. Signin' checks eatin' Ramen noodles over here....:)

[nytro2413]

how much for cruise control unit?

[Clutchkick Murphy]

I have both the cruise control unit, the cruise control throttle cable assembly, and the cruise control switch for the steering wheel. Unit:$27, cable:$20, switch:$5...whole slew:$40. all prices are SHIPPED including paypal fees. LMK if this is cool and send me a PM, I can give you my paypal info.

[Lowlifes!]

Wow, nice parts list bump!

[Clutchkick Murphy]

Bump! Need money, just bought coilovers and I am BROKE! any offer accepted, you will probably not be turned down!

[ogbryce]

manual driveshaft, i just need the front part so you can usps flat rate ship it. 98295 should cost 15$

[Clutchkick Murphy]

PM'd you bud, get back with me for payment.

[Clutchkick Murphy]

Updated list! Bump!! C'mon, neeeeed to buy red sox tickets!!! Lol

[jontron5000]

Are the AC lines from a DOHC s13?

[Clutchkick Murphy]

PM'd you sir, I have AC parts all day long!

[Clutchkick Murphy]

yes, for DOHC.....

[Clutchkick Murphy]

bump....if you guys want any of this stuff just pay for shipping and toss me a bit extra for gas to the post office and its yours, get this stuff out of my basement. Any reasonable offer WILL BE ACCEPTED!!!

[kabukie]

CUSCO power brace

Still have it? S13 or S14? Also have a pic?

[Clutchkick Murphy]

no, I can't find that CUSCO brace now :( Most parts are still available!