Log in

View Full Version : S13 SR20DET alternator torque specs


kennn
09-09-2011, 11:09 PM
This is on a redtop S13 SR20DET. I need the torque specs for the nut that goes on the long bolt that holds the alternator on the bracket, and the nut that goes on the adjusting bolt.

Couldn't find it in the FSM or by searching.

Thanks.

chituntang
09-09-2011, 11:23 PM
Really? Hand tighten and you will be good...

Wake
09-09-2011, 11:25 PM
/thread...

rcdad123
09-10-2011, 12:37 AM
the pivot bolt which uses a 14mm socket can be safely torqued to 40 lbs/ft. and the adjusting nut which uses a 12mm socket can be torqued to 20-25 lbs./ft.

Wake
09-10-2011, 12:53 AM
Sounds like hand tight on both to me.