Sil-Eighty SE-K
09-07-2011, 06:31 PM
changing my setup..... got a bunch of goodies up for grabs here at rock bottom prices
all prices are plus shipping.
***1st up is a set of JE pistons for rb26 they are .040 over (87mm) they come with wrist pins, and circlips and rings. They only have 1000 miles on them and are in mint condition. 8,2:1 compression and they have valve recessions for high lift cams
take em for $500!!! SOLD
***Im also selling a set of JUN main studs for rb25/rb26. These only have about 1000 miles on them.... retail is something like $600, so i think $200 is fair......
***I have a set of used ARP mains as well..... $150
***up next is a set of totally baller Carillo PRO-H rods w/ CARR hardware.... these rods are the best money can buy for rb25/rb26.... the CARR bolts alone are $60 EACH (x12= $720) these cost right around $1900 new.
im selling for a steal at $1000
http://img62.imageshack.us/img62/6106/img3583dz.jpg
http://img37.imageshack.us/img37/3241/img3572i.jpg
http://img18.imageshack.us/img18/1039/img3574l.jpg
http://img695.imageshack.us/img695/2668/img3573b.jpg
***Also i have a BRAND NEW OEM NISSAN R34 N1 crankshaft..... brand new in the box never used or even placed in an engine
Im shooting myself in the foot selling this for $800 but I need to move it!!!
http://img405.imageshack.us/img405/7219/img3408nq.jpg
http://img508.imageshack.us/img508/166/img3593c.jpg
http://img821.imageshack.us/img821/4148/img3594k.jpg
http://img684.imageshack.us/img684/6066/img3597jr.jpg
http://img856.imageshack.us/img856/5638/img3596j.jpg
http://img199.imageshack.us/img199/5849/img3595e.jpg
***here is an N1 oil pump for RB26.... used for 1000 miles, i took it apart and its mint, no cracks or nothing (was using updated JUN collar'd crank)
$150 takes it! (SOLD!)
***selling an RPS 6 puck clutch with HD pressure plate (blue) rated at 550ft/lbs... plenty of friction material left.... upgrading to twin plate.... was functioning perfect when removed
$300 plus ship
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/312731_2400019323635_1345604671_2806590_6920817_n. jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/299035_2400020683669_1345604671_2806592_5037895_n. jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/320360_2400022323710_1345604671_2806593_1566039_n. jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/302092_2400024243758_1345604671_2806595_7573976_n. jpg
***Also up for grabs is a set of Eagle H-Beam rods for rb25/rb26 with less than 1000 miles on them (2 are brand new).... obviously mint
$350 plus ship
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/294607_2400002403212_1345604671_2806575_1756517_n. jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319617_2400004243258_1345604671_2806577_6024460_n. jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/294556_2400014483514_1345604671_2806587_7452780_n. jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/299885_2400016203557_1345604671_2806589_3887242_n. jpg
PM with interest
all prices are plus shipping.
***1st up is a set of JE pistons for rb26 they are .040 over (87mm) they come with wrist pins, and circlips and rings. They only have 1000 miles on them and are in mint condition. 8,2:1 compression and they have valve recessions for high lift cams
take em for $500!!! SOLD
***Im also selling a set of JUN main studs for rb25/rb26. These only have about 1000 miles on them.... retail is something like $600, so i think $200 is fair......
***I have a set of used ARP mains as well..... $150
***up next is a set of totally baller Carillo PRO-H rods w/ CARR hardware.... these rods are the best money can buy for rb25/rb26.... the CARR bolts alone are $60 EACH (x12= $720) these cost right around $1900 new.
im selling for a steal at $1000
http://img62.imageshack.us/img62/6106/img3583dz.jpg
http://img37.imageshack.us/img37/3241/img3572i.jpg
http://img18.imageshack.us/img18/1039/img3574l.jpg
http://img695.imageshack.us/img695/2668/img3573b.jpg
***Also i have a BRAND NEW OEM NISSAN R34 N1 crankshaft..... brand new in the box never used or even placed in an engine
Im shooting myself in the foot selling this for $800 but I need to move it!!!
http://img405.imageshack.us/img405/7219/img3408nq.jpg
http://img508.imageshack.us/img508/166/img3593c.jpg
http://img821.imageshack.us/img821/4148/img3594k.jpg
http://img684.imageshack.us/img684/6066/img3597jr.jpg
http://img856.imageshack.us/img856/5638/img3596j.jpg
http://img199.imageshack.us/img199/5849/img3595e.jpg
***here is an N1 oil pump for RB26.... used for 1000 miles, i took it apart and its mint, no cracks or nothing (was using updated JUN collar'd crank)
$150 takes it! (SOLD!)
***selling an RPS 6 puck clutch with HD pressure plate (blue) rated at 550ft/lbs... plenty of friction material left.... upgrading to twin plate.... was functioning perfect when removed
$300 plus ship
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/312731_2400019323635_1345604671_2806590_6920817_n. jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/299035_2400020683669_1345604671_2806592_5037895_n. jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/320360_2400022323710_1345604671_2806593_1566039_n. jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/302092_2400024243758_1345604671_2806595_7573976_n. jpg
***Also up for grabs is a set of Eagle H-Beam rods for rb25/rb26 with less than 1000 miles on them (2 are brand new).... obviously mint
$350 plus ship
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/294607_2400002403212_1345604671_2806575_1756517_n. jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319617_2400004243258_1345604671_2806577_6024460_n. jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/294556_2400014483514_1345604671_2806587_7452780_n. jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/299885_2400016203557_1345604671_2806589_3887242_n. jpg
PM with interest