PDA

View Full Version : Need my Front Hubs Redrilled...562 Area

dOMEmE
09-02-2011, 11:48 AM
Long story short, i bought rims with a wrong bolt pattern, RE-Stocking fee was stupid high so i just bought conversion spacers for the rear and since the front hubs are round im planning on getting them re-drilled since i heard its possible.

Before you ask why i didnt get spacers for the front, i didnt get them because the spacers are too fat for the front and i will have to pull the front fenders and camber alot and i dont wanna do that (17x10 +15 without spacers) they only made the conversion spacers in 25mm thick.


Pretty much just want to go from 4x114.3 to 4x108...pretty simple


Any one know of a place in the 562/Local? i searched on here and didnt find anything.

Any help would be appreciated....feel free to flame or say dumb shit if you like im used to the "Zilvian" people hahahaha :cool:
handinpants
09-02-2011, 01:40 PM
I would call up Vince over at Flawless Z, he is really good, and is not that far from your area, Flawless Z Performance - (http://www.flawlesszperformance.com/)
I have had him work on my vehicles before, and his expertise with nissans is godlike.
dOMEmE
09-02-2011, 02:07 PM
I would call up Vince over at Flawless Z, he is really good, and is not that far from your area, Flawless Z Performance - (http://www.flawlesszperformance.com/)
I have had him work on my vehicles before, and his expertise with nissans is godlike.

just called him, he said no =[ thanks though.
Poppadoc
09-02-2011, 03:05 PM
is it possible to mill them down to the desired thickness
dOMEmE
09-02-2011, 04:36 PM
is it possible to mill them down to the desired thickness

the conversion spacers? i dont think so, and i would be able to do it myself regardless since i have no kind of tool capable of =[
rat240
09-04-2011, 01:45 AM
just get the wheels re drilled
RicerJ
09-04-2011, 03:13 AM
redrilling the wheel sounds like a better idea
usdm180sx
09-04-2011, 10:08 AM
Marco at sr20store in Gardena can do it
dOMEmE
09-06-2011, 12:14 PM
just get the wheels re drilled

redrilling the wheel sounds like a better idea


i called around for that aswell and the cheapest i found was 60 bucks a wheel....i never re-drilled wheels but that sounds pricy.

ive heard re-drilling hubs is only like 20 bucks a hub.

that might be my only choice though.

Marco at sr20store in Gardena can do it

thanks Norm ima give him a call today =]
dOMEmE
09-06-2011, 04:54 PM
marco at sr20store in gardena can do it


just called him and he said no =[