PDA

View Full Version : MO FS: S14 Nagisa Driver Side Seat Rails


aled
08-30-2011, 08:09 PM
Name: Alex Ledbetter
Contact: spartanhockey409@yahoo.com, PM
Location: St. Louis, MO
Shipping: Yes, Buyer Pays
Payment: PayPal only


SOLD

aled
09-06-2011, 10:20 AM
1st Bump.

Make offers.

besTint
09-06-2011, 10:36 AM
WOW great deal. what seat were you trying to use it with?

aled
09-06-2011, 12:44 PM
WOW great deal. what seat were you trying to use it with?
Recaro Pole Position.

besTint
09-06-2011, 04:48 PM
Recaro Pole Position.

slightly wider? i had to modify the mounting points to fit a evo, evo2plus and pro2000 sparco sidemount. not hard to do.

!Zar!
09-06-2011, 04:53 PM
I can't really tell by the pic, but is this the super low rail? The one an adjustment arm on each rail?

besTint
09-06-2011, 06:19 PM
no just 1 slider latch but its the newer revised version from nagisa. i prefer the older nagisa rail because the latch is more vertical. the newer ones are more lateral and get real close to the trunk release.

this is a newer nagisa rail on a S14 with a Sparco EVO seat. cant go super low because the evo seat is wider at the bottom than say for instance a Bride Zeta II/III so if you want to fit a bigger seat like a EVO/EVO2/EVO2plus/Pro2000 than you need to widen the rails by cutting off the mounting points on the rail and welding them more inwards so the rail sits outwards. this way i was able to fit almost any sidemount seat since the seat mounts have slight adjustments.
http://www.lovemytint.com/bestint/posts/seatrail.mods/IMAG0870.jpg
http://www.lovemytint.com/bestint/posts/seatrail.mods/IMAG0872.jpg


now this is a picture of the older nagisa rail which has the more vertical seat latch. you have more room to play with on these. you can also use the BRIDE rails but they are dual latch. more costly but has more room to play with vs. the newer nagisa rails.
http://www.lovemytint.com/bestint/posts/seatrail.mods/IMAG0873.jpg
http://www.lovemytint.com/bestint/posts/seatrail.mods/IMAG0996.jpg
http://www.lovemytint.com/bestint/posts/seatrail.mods/IMAG0997.jpg

aled
09-07-2011, 07:35 PM
slightly wider? i had to modify the mounting points to fit a evo, evo2plus and pro2000 sparco sidemount. not hard to do.
Yes, just slightly wider. I could have notched the sidemount portion to work, but I had planned on returning the rails to EnjukuRacing.

Since, a return wasn't feasible as I'd opened and attempted to install the rails, I just decided to sell them here.
I can't really tell by the pic, but is this the super low rail? The one an adjustment arm on each rail?
I believe it is the super low rail. I purchased the Nagisa rail listed on Enjuku's website.

Here is the link: Nagisa/Nams Auto Super Low Seat Rails - Nissan 240sx [ XNSR011L ] - Enjuku Racing - Performance Parts and High Quality Fabrication (http://www.enjukuracing.com/nagisanams-auto-super-seat-rails-nissan-240sx-p-6801.html)

aled
09-08-2011, 07:07 PM
SOLD.

Mods, please close/delete this thread.


Thank you.