temp gauge not working help!!!!!

[Zenki_cb]

Anyone know why this could be happing. My temp gauge doesnt work at all. Before I did my s14 sr swap my temp gauge was working and now that i swapped it in it doesnt work at all. Now I been doing some research and I read that I have to put a ka temp sensor instead of the sr one is this true. Any feedback would be great thanks for looking.

[jdm213]

hey i waana know 2 i have the same got dam porblem after my sr swap but it prolly not hooked up .. maybe urs isnt either

[zerocoolalmi]

chek condictibility between sensor and f4 connector.. if is good the troub is in the dash harness .. and .. chek the resistance of the water temps gauge sensor

[DinoMan]

Not sure if its the same with you but when i swapped my s13 sr into my s14 i had the same problem. Got a temp sensor for a s14 ka from a parts store, swapped it, and now my gauge reads fine. Heard you just have to match the sensor with the cluster. s14 with s14 and s13 with s13

[c-los13]

^^^^^^^ your right
THIS HAS BEEN COVERED 1000000000 TIMES!!!!!

[fliprayzin240sx]

He said it doesnt work at all, I'd check the wiring from the ECU kick panel to the chassis/cluster wiring. Shouldnt matter to the OP, he said he did an S14 SR swap into an S14. Sensors will be the same between the 2.