FS: RB26 used RPS 6 puck clutch and Eagle H-beam rods (arp2000) cheap!

[Sil-Eighty SE-K]

changing my setup.....
selling an RPS 6 puck clutch with HD pressure plate (blue) rated at 550ft/lbs... plenty of friction material left.... upgrading to twin plate.... was functioning perfect when removed
$300 plus ship
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/312731_2400019323635_1345604671_2806590_6920817_n. jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/299035_2400020683669_1345604671_2806592_5037895_n. jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/320360_2400022323710_1345604671_2806593_1566039_n. jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/302092_2400024243758_1345604671_2806595_7573976_n. jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/321175_2400030323910_1345604671_2806598_337898_n.j pg
Also up for grabs is a set of Eagle H-Beam rods for rb25/rb26 with less than 1000 miles on them (2 are brand new).... obviously mint
$350 plus ship
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/294607_2400002403212_1345604671_2806575_1756517_n. jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/319617_2400004243258_1345604671_2806577_6024460_n. jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/294556_2400014483514_1345604671_2806587_7452780_n. jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash4/299885_2400016203557_1345604671_2806589_3887242_n. jpg

PM with interest

[je_decoy]

Bump up. Do u know if the rb25/26 crank is the same?

[Sil-Eighty SE-K]

these rods will fit the 25 crank journals but the crank throw is different from a rb26 i believe. the rod length is the same between the 2..... these rods will work in rb25 and rb26..... but i think you need to use whichever crank goes with the engine

[P-Funk alot]

^^^^^ true.... why do you have 2 new rods

[ariansworld]

He probably spun two bearings and both rods warped, so he had to order two new ones?? Happened to me.

[Sil-Eighty SE-K]

spun ONE bearing..... they werent warped but you could see the 2 rods took a little heat..... so rather than remotely risk anything i ordered 2 more to replace the questionable ones..... the rest were all checked at a machine shop and are perfectly fine.

[unaffiliated240sx]

Ive got a twin disc for sale if your interested, if not then free bump for you

[Sil-Eighty SE-K]

already got one......

[Sil-Eighty SE-K]

all window shoppers so far.... bumper