SR20DET (SR22DET long block) for sale

[Josh]

Its an s13 SR20DET and it will be sold as a complete long block from valve cover to oil pan.

Specs are as follows:

MA-Motorsports built 2.2 Liter S13 SR20DET long block:
-JE 9:1 Custom stroker pistons
-Bored 20 over
-Brian Crower Billet Stroker Crank
-Brian Crower 625+ Stroker Con rods
-chamfered oil passages in block
-ACL Race Rod Bearings
-ACL Race Main bearings
-ARP GTIR Oversized head studs
-Drilled head and block for oversized head studs
-Apexi Head Gasket (cut for oversized studs)
-Open combustion chambers, polished
-Radius valve job
-Solid Lash Adjusters
-Brian Crower stainless Valves
-Brian Crower Ti retainers and valve springs
-Brian Crower Stage 2 camshafts
-JUN Cam gears
-Greddy Oil Pan
-S14 SR Water Pump
-S13.4 Valve Cover
-Catch can with plumbing (including check valve)
-A couple accessories will also be included: alt. w/ powdercoated brackets, PS pump w/ powdercoated brackets

The motor itself has less then 20 miles on it. There is nothing wrong with it at all, I have decided to put something else in my car.

Asking is 6k OBO. This is for the long block only! If you want to complain about how expensive it is, price everything out yourself, get machine work done, realize you will spend an additional 4-5k. That being said, I am selling everything firewall forward including the Tec3r ecu. If you want more details ask. I will NOT part everything out unless the motor is sold first, dont ask for me to part.


Edit: Everything in this picture is for sale, for me to part anything out the motor must be sold first. If you want the whole enchilada, PM me.

http://media.ziptied.com/members/files/141/DSCN0378.JPG

DO NOT BUMP MY THREAD

Edit: Per request

http://media.ziptied.com/members/files/141/SCAN0004.JPG

[JSimpson]

the valvecover deserves a bump! Whats the point of it?

[Josh]

the valvecover deserves a bump! Whats the point of it?

s14 valve covers have better baffling then s13's. Ever notice how people with s13 sr's empty their catch cans more often unless they have a return to the pan? This is the best of both worlds.

[ripracer]

You need to get yourself an iPhone, or another skinny.

[Josh]

You need to get yourself an iPhone, or another skinny.

HAHA, ill pass on the skinny, not worth the trouble. My phone takes good pics but the garage light is out so I was working with light from the kitchen and the flash.


p.s. you buy a bike yet slacker?

[Sarom_ps13]

So.. curious about the coils packs, are they just relocated? and whats the hp rating on this engine?

[All*StarS15]

definetely worth the 6,000.

[younghatchowner]

wow josh..why are you selling this..when i seen that this was you posting the first thing i looked for was the "DA" valve cover but i guess that thing holds some sentimental value??

[Josh]

wow josh..why are you selling this..when i seen that this was you posting the first thing i looked for was the "DA" valve cover but i guess that thing holds some sentimental value??

That valve cover lives in MD, hanging on someones wall. I am selling it because between training for Florida Ironman, and school, I dont have much time for drifting, or rather, as much time as I did in the past. For what I want to do, this motor is to much, would rather someone who would use it for its full potential have it, ill just lsx my car, and have fun every few months.

So.. curious about the coils packs, are they just relocated? and whats the hp rating on this engine?

I am not using coilpacks, the setup utilizes direct fire units (DFU), you can use coilpacks if you wish, I just chose not to



http://www.racetep.com/logos/dfu-03-tn.jpg

as for HP rating, I was aiming for 550ish which is easily attainable, as for top HP, depends on how much fuel/air you are going to push into it.

[Josh]

bump numero uno

[IThaJokaI]

bump for a sick setup and a florida dude.

[Josh]

bump deuce

going on ebay this weekend

[TriniGT]

Break the block please.

[Josh]

Break the block please.

the block (as in the long block) will not be broken up, however, after I put this up on ebay, everything else will be for sale (i.e. inj, turb, mani's, etc).

[TriniGT]

Was actually looking at the block to combo with a VE head.

[Josh]

not going to happen, sorry

[EnjukuBG]

I vouch for Josh. Rad motor set up. Get it!!!!

[Josh]

sold lock/close