1992 Supermade 240sx Daily/Show Car (Complete or Shell)

[bboyoracle]

Contact: [email protected]
Location: Fairfax, VA
Price: 12,900 obo willing to remove the following to lower price:
-Origin Rear Seat Delete
-Autopower Roll Bar
-Takata Harnesses
-Arc Intake
-Key's Steering Wheel w/ Works Bell Hub

Also willing to sell the car as a rolling chassis/shell.

This is my 1992 Nissan 240sx that was recently featured as the cover car for Import Tuner October 11' (In stores now). I built this car from a bone-stock chassis and I'm selling it in order to fund my new project. It is my daily driver and has never been drag raced, tracked or drifted. It has been garage-kept and babied its entire life. All parts used throughout the build are quality with no corners cut. I documented the build on zilvia:

http://zilvia.net/f/chat/196188-supermade-fastback-build-up-thread.html

The only thing not documented is my recent engine bay project which was completed Fall 2010. The car is in great condition and is a driver's car as opposed to a track car. It has full clean interior, power windows/locks, power steering and heat. The car at the moment does not have AC because I decided to remove it for aesthetic reasons. Howevever I will include, with the car, everything needed in order to hook up AC should you decide to install it. The AC line is custom and will just bolt right on. And all the wiring for AC is still there despite the wire tuck.

The turbo seals are gone, so the turbo will need to be replaced. The front fenders have a crack and the bumper does also on the passenger side, hard to notice (in pictures and video below). Besides that the car runs fine and the body is straight, glossy and dent-free. I'm always asked if the car just got out of the body shop lol.

NOTE: The car does not come with the Work Varianza D3S's, x bar, bride seats or valve cover as those have been sold. Instead it will come with 300zx wheels. See below to see whats included.

Featured in this month's Import Tuner as the Cover Car (In stores now):

http://www.simbackissues.com/Merchant2/graphics/00000001/IT1110FS.jpg

http://farm2.static.flickr.com/1255/5144722305_95300cc87e_b.jpg
http://farm2.static.flickr.com/1048/5151403235_6726bee64c_b.jpg
http://farm2.static.flickr.com/1309/5133899832_eb424b58b0_b.jpg
http://img.photobucket.com/albums/v283/rosegardenm5/STATE%20OF%20STANCE/24ff8f54.jpg
http://farm5.static.flickr.com/4090/5145323076_97efe5d53a_b.jpg
http://garagespec.net/wp-content/gallery/first-class-fitment-canibeat-show/fitment-88.jpg
http://www.canibeat.com/wp-content/uploads/2010/11/IanK_Waldo_CIB-600x400.jpg
http://farm4.static.flickr.com/3584/3559410951_f7e0e5e5b4_b.jpg
http://i23.photobucket.com/albums/b381/bboyoracle/Car%20painted/imstar3.jpg
http://i23.photobucket.com/albums/b381/bboyoracle/Car%20painted/IMG_6757.jpg
http://i23.photobucket.com/albums/b381/bboyoracle/Car%20painted/IMG_6758.jpg
http://i23.photobucket.com/albums/b381/bboyoracle/Car%20painted/IMG_8082.jpg
http://i23.photobucket.com/albums/b381/bboyoracle/IMG_2885.jpg

Video:
YouTube - Movie (http://www.youtube.com/watch?v=2tAYSNjiYMw)


1992 Nissan 240sx
Title: Clean

Engine Bay and Engine

Resprayed Engine Bay Cherry Red Pearl with Custom Pearl
Welded Hot Pipe Hole and Battery Tray Shut
All unnecessary brackets shaved
Firewall and Brake Booster Wrapped in Gold Heat Reflective Film

Blacktop SR20DET *45k miles*

The following maintenance was done in Fall 2010:
NEW OEM Headgasket
NEW OEM Water Pump
NEW OEM Oil Pump
NEW OEM Timing Chain Guide and Tensioners
NEW OEM Valve Cover Gasket
NEW OEM Intake Manifold Gasket
NEW OEM IACV Gasket
NEW OEM Shifter Gasket
All New Hoses
Tranny Fluid Flushed and Replaced with Motul

Durdan Perfab Wire Tucked Harness wrapped in Techflex Sleeving w/ Fusebox Relocated to Arm Rest
Chase Bays Brake Line Tuck Kit(Black) wrapped in Gold Heat Reflective Film
Chase Bays Clutch Line(Black)
Dippedparts *Titanium Burnt Finish* ARC Intake Induction Box
Baller Bolts "Titanium Burnt" Strut Tower Nuts
Baller Bolts "Titanium Burnt" Valve Cover Nuts
ARC Oil Cap w/ Baller Bolts "Titanium Burnt" Nuts
Kinetik Carbon Fiber Coilpack Cover
*Carbon Fiber Dipped* Greddy Intake Manifold w/ Powdercoated "Jet Black" Throttle Body
Powdercoated "Jet Black" New OEM Fuel Rail
Powdercoated "Jet Black" OEM Catch Can
Mishimoto Fan Shroud Powdercoated "Jet Black"
Mishimoto X-Line Radiator
Samco Black Radiator Hoses
Touge Factory Gold Pulleys
Parts Shop Max High Mount Intercooler Kit
Triple Chrome Dipped Cold and Hot Pipe
Triple Chrome Dipped Radiator Brackets
Triple Chrome Dipped Heat Shield
Steel Braided High Pressure Power Steering Hose
Greddy Rocker Arm Stoppers
Greddy Oil Pan
Nismo Motor Mounts
Nismo Tranny Mounts
NGK Iridium Spark Plugs
Walboro 255 Fuel Pump
MR 3" Downpipe
CATCO 3” High Flow Catalytic Converter
Exedy Stage 1 Racing Clutch
Nismo Clutch Pivot Ball Stud

Exterior
Resprayed Body Cherry Red Pearl with Custom Pearl ($5500)
Supermade Modified One-Piece Headlight with PIAA P-3000
Supermade Front Bumper
Supermade Side Skirts
Supermade Rear Bumper
Supermade Rear Trunk Spoiler
GP Sports Modified Door Cap to sit flush with sideskirts
326Power Rear Roof Spoiler
Front Rolled Fenders
Rear Pulled & Rolled Metal Fenders
Nissan 180sx Quarter Panel Windows
Nissan 180sx Type X Tail Lights
Nismo Carbon Kevlar Center Piece
Vis Racing Carbon Fiber Trunk with Rear Wiper Deleted
Shaved Rear Window Squirter
NEW Windshield

Interior
Bride Gradiation Wrapped Door Panels
Bride Gradiation wrapped Arm Rest
Bride Gradiation wrapped Glove Box
Bride Gradiation Shift Boot
Key's Steering Wheel
Key's Shift Knob (never used)
Works Bell Rapfix II Hub
Works Bell Quick Release
Takata Harnesses (Driver and Passenger) w/ Takata Gel Pads
Origin Carbon Fiber Two-Piece Rear Seat Delete
Supermade Black/Grey Floor Mats (Front and Rear)

WHEELS and BRAKES
300zx Wheels(4)
Q45 2-Piston Front Brake Upgrade
Brembo Rotors (F & R)
HKS Competition Teflon Brake Lines (F & R)
PBR Performance Brake Pads (F & R)
*Brake Fluid Flushed and Replaced with Brembo in Fall 10"*

Suspension
Auto-Power 4-Point w/ Harness Bar
Kei Office XT Coilovers
Cusco Front Sway Bar
Cusco Rear Sway Bar
Cusco Rear Upper Control Arm
Battle Version Toe Arms
Tein Inner/Outer Tie Rods
Ichiba Front 5-Lug Conversion
Ichiba Rear 5-lug Conversion

[Sr20SilviaS13]

i was reading the article in import tuner a few days, legit car worth every penny.

[lucky_brett]

perfect example of a clean build! loved reading about it in import tuner

[cpl dozier]

How much for it as a rolling shell?

[bboyoracle]

Glad you enjoyed the article, Yuta Akaishi did a great job writing it!

cpl dozier it depends on what you want included. Send me a pm.

[bboyoracle]

Bump with a picture that didn't make the magazine feature!

http://farm7.static.flickr.com/6075/6071144557_7afc356dd5_b.jpg

[warauto]

I think this is what people dream that their cars would look like.......GLWS

[bboyoracle]

Thanks :) TTT!!!!!!!!!

[bboyoracle]

bump......

[bboyoracle]

Ad updated.....

sold some parts and price lowered!

[Riq]

That ARC intake is a beautiful piece, I love mine. what car are you building next? glws

[kotic]

I think this is what people dream that their cars would look like.......GLWS

.............this

[bboyoracle]

I purchased a 02 Q45 as my new project :)

[IwantAs13]

Dayyymmmm son, dope car! What rims are those?

[speedgod^s13]

Dayyymmmm son, dope car! What rims are those?

Dayyymmmmm son, learn how to read! They are Work Varianza D3S.

[bboyoracle]

For a price on the shell alone pm me with what you want included.

[BHack3tt]

how is this thing still FS!!!???

[gotspins13]

worth every single penny and dollar! this car should never be taken apart down to a shell just buy it and drop jaws!

[bboyoracle]

worth every single penny and dollar! this car should never be taken apart down to a shell just buy it and drop jaws!

Thanks the buyer is definitely getting a deal. Not only did I spend more than double my listed price, but the car took a year to complete at the body shop. Another year to complete the engine bay project and not to mention the wait time on all my other parts. So no wait time and stupid cheap :faint:

[nathanong87]

lemme get this

[ship2236]

God I still love this car. Hope it finds a good home but idk. All the clean complete car these days r going to tardfucks who completely ruin them. (ex. Camber sc, obeewon s14, Metallic grey supremade coupe)! Gl non the less

[bboyoracle]

What happened to that supermade coupe? I remember seeing it for sale here a couple months back by its new owner. Seemed in ok shape to me?

[droptoprx-7]

Seen in person super clean. Super clean glws

[dohdoh806]

i know this is probably stated in the article but i havent seen it, who did the wire tuck was it you ??? i did read your engine run down bout the chase bays parts just wondering if you did it yourself?

[lost240soul]

bump for beautiful car .. i watched the whole build up of this car ..hope your next project is just as clean as this one

[PsynisterDrift]

Can you post current pics of the car...w/o the stuff thats not coming with the car and the replacement parts that will take its place...please thanks.

[ayoitsstevo]

seen this car in person. bump for the cleanest s13 iv'e seen.

[ROUGE180]

Damn clean east coast flavor. Have had the pleasure of seeing it in person. So so good. glws

[simpl cb7]

bump for a legit seller and a really clean well done S13.

[bboyoracle]

Thanks again for the compliments!

[bboyoracle]

bump!!!!!!!

[whats_a_sr20]

your car in facebook.....too clean man.

It's all in the details... | Facebook (http://www.facebook.com/media/set/?set=a.10150291965696840.333533.16350961839&type=1)

[neb11ihtut]

you should prolly just keep this car for 9 months so i can buy it when i get back from afghanistan :D

[Future240]

Glad you enjoyed the article, Yuta Akaishi did a great job writing it!

cpl dozier it depends on what you want included. Send me a pm.

Thanks :) TTT!!!!!!!!!

bump......

Ad updated.....

sold some parts and price lowered!

For a price on the shell alone pm me with what you want included.

Thanks the buyer is definitely getting a deal. Not only did I spend more than double my listed price, but the car took a year to complete at the body shop. Another year to complete the engine bay project and not to mention the wait time on all my other parts. So no wait time and stupid cheap :faint:

What happened to that supermade coupe? I remember seeing it for sale here a couple months back by its new owner. Seemed in ok shape to me?

Thanks again for the compliments!

bump!!!!!!!


Over the 2 bump limit, you can start a new thread in 3 days.



http://zilvia.net/rules.html
Thread Bumping

You may only bump your thread TWICE. That is not 2 times a day, or two times a week. TWICE only.

A bump is constituted as any unnecessary post you make in your sale thread. This can include:
“Bump”
“To the top”
“All Pms Responded to”
“Price Drop”
Etc, etc, etc

You should utilize the PM system to answer potential buyer's questions, and you can edit your initial post to reflect any detail updates, or price changes.