View Full Version : GA Ka24de forged internals (arias, k1 tech, brian crower)
JN1AS4
08-19-2011, 04:40 PM
These are all parts that I've collected over the past year to build my KA. All parts are BNIB unless stated otherwise. But since I've changed direction I dont need these parts anymore. I have a S14 ka24de block/head still mated up that will go to whomever that buys ALL listed parts locally. ALL PRICES ARE BEFORE SHIPPING!!! Call/txt James 678 663 0426 for any questions.
Arias Pistons $450
Part no: 3520500
Bore inch/mm: 3.504 / 89.00 (stock)
Oversize: STD
Comp. Height: 1.34
Dome CC: -30.8
Comp Ratio: 8.7:1
Unit: Set/4 Piston rings, Wrist pins, & locks
http://i54.tinypic.com/w9uvdw.jpg
K1 Technology Connecting rods (AMS) $300
Part no: NH6494AGFB4
Billet
H-Beam
http://i52.tinypic.com/97mgkw.jpg
Brian Crower 264/264 $250
Part no: BC0211
Stage 2: Slight lope at idle, does not require aftermarket valve spring.
Used approx. 2k miles
Stock ka24de cam gears still attached
PERFECT CONDITION
NO SURFACE RUST
NO SCARS
http://i54.tinypic.com/2ywxo20.jpg
COMBO(EVERYTHING) $850
Comes with Ka24de block/head (timing chain rattle)
http://i55.tinypic.com/1zqg8c3.jpg
BlewByYou
08-19-2011, 04:48 PM
Best price for rods and cams shipped 77090
Leadfoot1016
08-19-2011, 05:29 PM
Where u at in ga? I may take those cams off of u
waxball88
08-19-2011, 05:57 PM
Where in ga? Interested in everything
Danielmcn
08-19-2011, 07:05 PM
Interested in any trades? I have a shit ton of rb stuff.
nismoninjagtr
08-20-2011, 06:05 AM
I wish this were in Ohio... :'(
anti tyler
08-20-2011, 06:17 AM
I wish I wasn't on deployment, I'd drive right up there and get this. damn. Bump for nice stash of goodies
JN1AS4
08-20-2011, 06:02 PM
I wish this were in Ohio... :'(
We can get it to Ohio. Its as easy as droppping it off at the Post Office...lol
nismoninjagtr
08-21-2011, 12:57 AM
Of you can get me a shipping quote to 45426 if I have enough money after paint supplys I'll get with you...
waxball88
08-21-2011, 01:33 PM
Fuck me this is such a good deal. Contemplating the 5hr drive.
JN1AS4
08-24-2011, 01:20 AM
Fuck me this is such a good deal. Contemplating the 5hr drive.
Make the drive!!! Its well worth it you want find a deal like the else where!!!! Built motor for $850 + bearings, head/main stud, and head gasket! I WILL SHIP at buyers expense.
redhatchy92
08-24-2011, 01:36 AM
i would take everything right now!!!!! but ur in GA and im in NJ :( i cant affort shipping
broncos97
08-24-2011, 08:37 AM
Where are you located in ga? I want to get those rods off of you.
1slwride
08-24-2011, 10:21 PM
wow... need everything except the block and head. Oh, but I have to buy the girlfriend a damn ring. LOL. bump for you on some very nice stuff!
JN1AS4
08-25-2011, 07:01 AM
Where are you located in ga? I want to get those rods off of you.
Jonesboro, GA. About 25 mins south of Atlanta.
Riodcs
08-25-2011, 07:55 AM
what s the lowest price on brians cams? shipping to 60016
ultramagnus
08-25-2011, 01:24 PM
interested in the cams i sent you a PM.
93 240sx
08-25-2011, 03:28 PM
will u trade ur cams?
je_decoy
08-25-2011, 03:44 PM
bump for great deals
93 240sx
08-25-2011, 07:39 PM
ill take da cams do u pay for da shipping
shortyman4065
08-28-2011, 07:16 PM
how much for everything shipped to crown point, in, 46307 or alsip, il, 60803 if theres a price difference.
JN1AS4
09-17-2011, 10:08 AM
EVERYTHING is still AVAIABLE!!!! Come get it!!!!
JN1AS4
09-21-2011, 08:11 AM
BUMP....I know that someone NEEDS this stuff!!!!
JN1AS4
10-10-2011, 01:19 AM
El BUMPO!!!!
Future240
10-10-2011, 09:22 PM
We can get it to Ohio. Its as easy as droppping it off at the Post Office...lol
Make the drive!!! Its well worth it you want find a deal like the else where!!!! Built motor for $850 + bearings, head/main stud, and head gasket! I WILL SHIP at buyers expense.
Jonesboro, GA. About 25 mins south of Atlanta.
EVERYTHING is still AVAIABLE!!!! Come get it!!!!
BUMP....I know that someone NEEDS this stuff!!!!
El BUMPO!!!!
Over the 2 bump limit, you can start a new thread in 3 days.
http://zilvia.net/rules.html
Thread Bumping
You may only bump your thread TWICE. That is not 2 times a day, or two times a week. TWICE only.
A bump is constituted as any unnecessary post you make in your sale thread. This can include:
“Bump”
“To the top”
“All Pms Responded to”
“Price Drop”
Etc, etc, etc
You should utilize the PM system to answer potential buyer's questions, and you can edit your initial post to reflect any detail updates, or price changes.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.