fs entire ka-t setup

[sh1tsweak]

name:scott
location: howell, nj
contact: pm or text 732-720-1725
shipping: additional fees apply
thinkin about selling my entire s13 ka-t setup to go v8, has no compression.


UPDATE
finally got a chance to take my cyl head off and the pistons/cyl walls are fucked so im gonna part this setup out.

eagle rods 3k miles 200
polished crank 50
1 good bare ka block(not from this setup), needs hone
nistune ecu for s13 ka sold
aem uego wideband with logger cable sold
820cc side feeds 200
z32 maf blow thru 50
cx racing fmic with greddy rz bov 400 (cold pipe cut for blow-thru)
jgs diy t3 turbo manifold sold
borgwarner gm8 turbo sold
tial 38 wg with 1 bar spring(also have 0.5 bar) sold
dumptube -sold
oil cooler with built in tstat. 400 (grex adapter
300zx act 6puck clutch good for 512 ft lbs 3k miles on it 250
d21 flywheel machined for s13 ka block 50
trans that grinds 3rd -100
trans that shifts good-300
some sweet agency power rad hoses. -40
some fancy plastic intake maifold gasket -sold
mishimoto tstat -20
ngk wires like 30 miles on them - 50
crower dual valve springs- sold
quest alternator sold
arp 10mm head studs -sold
arp main studs-50
megan racing short throw, solid shifter bushing-sold

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/148761_10150306294500366_608145365_15692903_346716 1_n.jpg
http://i346.photobucket.com/albums/p408/spgsk8/IMG_20110823_173920.jpg
http://i346.photobucket.com/albums/p408/spgsk8/IMG_20110823_173932.jpg
http://i346.photobucket.com/albums/p408/spgsk8/IMG_20110823_174156.jpg
http://i346.photobucket.com/albums/p408/spgsk8/IMG_20110823_174448.jpg
http://i346.photobucket.com/albums/p408/spgsk8/IMG_20110823_174101.jpg
http://i346.photobucket.com/albums/p408/spgsk8/IMG_20110823_174718.jpg
http://i346.photobucket.com/albums/p408/spgsk8/IMG_20110823_174014.jpg

[anti tyler]

Pictures? are you willing to part it out? you'd probably do better that way.

[nightsauce]

so whats the issue and why does the motor have no compression?

[sh1tsweak]

it puffs smoke out of the catch can while cranking, pulled the plugs and cant see any holes or piston damage, most likely rings are gone.

im going to give it a few days before i consider parting it.

[souljaseth33]

I'm interested in a few parts as well if you do wind up parting out. what kind of miles are on the set up?

[ship2236]

Pics or it doesn't exist

[sh1tsweak]

ill get picks up tonight after work, theres about 3k miles the motor/clutch. i just got a little greedy with the ignition timing :doh:

[street240sx]

Nice price!! Bump for ka-t

[Live2Slide]

How much for entire turbo setup only?

[anti tyler]

it puffs smoke out of the catch can while cranking, pulled the plugs and cant see any holes or piston damage, most likely rings are gone.

im going to give it a few days before i consider parting it.


Well if you do part it, I'd like to get that oil cooler from you, Just shoot me a PM if you do consider parting it.

Thanks

[sh1tsweak]

UPDATE!

parting the setup, found damaged pistons/ cylinder walls

prices added.

[fliprayzin240sx]

What kinda clutch did you have on it?

[sh1tsweak]

What kinda clutch did you have on it?


its an act sprung 6 puck clutch, meant for a n/a z32, 240mm diameter vs the stock ka 225mm. rated for 512 lbft of torque. bolts up to the d21 nissan truck flywheel im also selling.

[sh1tsweak]

bump! pictures are up!

[240sxluver4life]

pmed about some stuff bump

[KOME]

What number were you pushing?
Dets on tune

[sh1tsweak]

dyno'd 296 at 11 psi on a stock motor. turned it up to 15psi on a built motor trapped 114-115 consistently. did bigger injectors and turned it up to 20 and had it running nice. then i got greedy with the timing and smoked the motor in 1 key stroke lol this was making some nice power. nobody really uses this turbo but its def got potential, wish i could have gotten to the track before i killed it....

[sh1tsweak]

parts sold, updated list

[My$800S14]

are the eagle rods the H-Beam rods good for 550+?