drift freaq
08-08-2011, 11:48 AM
These are our latest version of High durometer Polyurethane engine mounts. The mount bolts do not run straight through the Urethane .
This is done so as to prevent vibrational transfer that you would get with a straight through side to side stud.
We have also upgraded the durometer to 80 for even more shear strength and changed the color , per user requests to British Racing Green ( though the pic in the sun makes them look lighter. lol)
On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot (the industrial window caulking crap), which is inferior!
These can lower you engine up to 3/4 of inch depending on how you position them. You can also shift your engine backwards or forwards.
They have been track tested and run on many cars.
The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top.
Green mounts will be $120 per set. $135 shipped. Open group no list wait needed.
http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0859.jpg
There is a tech review of them as well here. http://zilvia.net/f/tech-talk/317539-product-review-drift-freaqs-engine-mouts.html
It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo!
Ok we are having a Summer Special on a limited stock run of Yellow mounts with centered studs. They are the same as the original 70 durometer Yellows except the studs are centered meaning no adjustment.
These will be $95 a set in groups of 5 and $105 a set individually.
shipping will be $15 so that is $110 shipped in the group and $120 shipped individually.
Once we are through the stock of these Yellows there will be no more of them. So buy them now at these prices.
so start the list for the Yellows.
1.
2.
3.
4.
5.
my paypal is [email protected]
This is done so as to prevent vibrational transfer that you would get with a straight through side to side stud.
We have also upgraded the durometer to 80 for even more shear strength and changed the color , per user requests to British Racing Green ( though the pic in the sun makes them look lighter. lol)
On top of that these are not tubes of Polyurethane! They are a molded setup using Polyurethane you cannot buy at Home Depot (the industrial window caulking crap), which is inferior!
These can lower you engine up to 3/4 of inch depending on how you position them. You can also shift your engine backwards or forwards.
They have been track tested and run on many cars.
The maximum amount is achieved when the offset bolts are placed on the outside with the centered bolts on top.
Green mounts will be $120 per set. $135 shipped. Open group no list wait needed.
http://i705.photobucket.com/albums/ww52/driftfreaq/IMG_0859.jpg
There is a tech review of them as well here. http://zilvia.net/f/tech-talk/317539-product-review-drift-freaqs-engine-mouts.html
It is highly recommended that you use the factory heat shield from your stock mounts on the exhaust side of the engine, especially if you are running a Turbo!
Ok we are having a Summer Special on a limited stock run of Yellow mounts with centered studs. They are the same as the original 70 durometer Yellows except the studs are centered meaning no adjustment.
These will be $95 a set in groups of 5 and $105 a set individually.
shipping will be $15 so that is $110 shipped in the group and $120 shipped individually.
Once we are through the stock of these Yellows there will be no more of them. So buy them now at these prices.
so start the list for the Yellows.
1.
2.
3.
4.
5.
my paypal is [email protected]