S14 work in progress

[TheGrim]

Pearl white 1998 nissan 240sx SE



Engine mods and misc:
Isis turbo manifold V2
Isis turbo elbow and downpipe
hi flo catco catalytic converter
Megan turbo catback 3 inch exhaust
circuit sports turbo ss lines
550cc deatschwerks injectors
AEM fpr
walboro 255lph fuel pump
Z32 fuel filter
RS enthalpy tuned ECU
Z32 MAF kit
Stance water neck adaptor for gauge
CodyAce a/c brackets
HKS SSQV black edition BOV
Apexi AVCR
Greddy turbo timer
Mishimoto radiator
Isis electric fan and shroud kit
Isis s14 FMIC and piping
Isis oil catch can
Isis silicone radiator hoses
Isis ss power steering line
Shuriken battery
Taka oil filter relocation kit
ISIS large capacity oil pan - not installed

Drivetrain mods:
spec stage 3 clutch
spec lightweight flywheel
nismo engine and tranny mounts
driveshaft shop 1 piece steel shaft
Isis V2 short shifter
agency power ss clutch line
tomei trax 2 way LSD

Suspension mods:
Greddy front and rear strut tower braces
BC coilovers
energy suspension steering rack bushings
wilwood front 4 piston caliper BBK with ss lines
Rear slotted and drilled rotors with Hawk performance (http://zilvia.net/f/) pads and agency power ss lines
Enkei FLC-01 18 inch wheels (bronze)
ISIS suspension arm package
Nismo power brace
Tanabe rear underbrace bars
megan rear lower support bar
stance solid diff bushings and rear subframe bushings
suspension techniques sway bar set


Interior mods:
momo steering wheel
nismo leatherwrapped (http://zilvia.net/f/) shift knob
sparco 3 point harnesses - not installed
stri gauges (boost pressure, oil pressure, water temp, oil temp)
Pioneer head unit (cd, mp3&4, ipod, satellite) with pioneer rear deck and front door speaker sets

Exterior mods:
Seibon CF hood
aerocatch locking hoodpins - not installed
VIS speed1 body kit -not installed
6k H.I.D kit

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs813.snc4/69343_440288999004_609189004_5442319_6750750_n.jpg (http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs813.snc4/69343_440288999004_609189004_5442319_6750750_n.jpg )

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/229480_10150174062159005_609189004_7096963_2748473 _n.jpg (http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/229480_10150174062159005_609189004_7096963_2748473 _n.jpg)

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/225915_10150174062244005_609189004_7096964_7172341 _n.jpg (http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/225915_10150174062244005_609189004_7096964_7172341 _n.jpg)

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/227980_10150174062324005_609189004_7096966_1971390 _n.jpg (http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/227980_10150174062324005_609189004_7096966_1971390 _n.jpg)



http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/227475_10150174062539005_609189004_7096968_6310585 _n.jpg (http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/227475_10150174062539005_609189004_7096968_6310585 _n.jpg)



http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/230535_10150174062704005_609189004_7096970_1088754 _n.jpg (http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/230535_10150174062704005_609189004_7096970_1088754 _n.jpg)

http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/224090_10150174062774005_609189004_7096971_4787542 _n.jpg (http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/224090_10150174062774005_609189004_7096971_4787542 _n.jpg)

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/228035_10150174062894005_609189004_7096973_966736_ n.jpg (http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/228035_10150174062894005_609189004_7096973_966736_ n.jpg)

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/224630_10150174063039005_609189004_7096974_8075190 _n.jpg (http://a4.sphotos.ak.fbcdn.net/hphotos-ak-snc6/224630_10150174063039005_609189004_7096974_8075190 _n.jpg)

[TheGrim]

Only problem I've got now is figuring out what to do to it next.... I'm not into drag racing at all. Really dont go to the track that often anymore for drift or autox. Any suggestions?

[rob22]

get better wheels.

[Hoffman5982]

If you're bored and just wanting something to do clean up the bay a bit. Relocate battery to the trunk, relocate fuse box, paint valve cover, etc. There's a lot you can do for little money.

[TheGrim]

I was thinking about 17" wheels with a wider stance. Trying to lower rotational mass with some lighter wheels and make for a better ride with more sidewall also.

Hmmm. Cleaning up the engine bay, does look a bit cluttered. ABS has alot to do with that when the harness work was done.

[Promise Land]

I think you've got the major stuff done and agree with the engine bay clean up. Beyond that, make a list of all the small things that bug you. If you had a hour to work on something, what would it be?

[1on1]

^this. All the little small things will make a big difference. As for wheels, I would go with rpf1s because they're light and cheap. This car will be interesting.

[ThatGuy]

This "Build Thread" does not meet the requirements set by the Rules and Guidelines.

:lockd: