PDA

View Full Version : KY 95 S14 Project unfinished w/built redtop sr20det FS/FT for Drift car


ZeNkI SiLvIa
08-04-2011, 12:59 AM
I have a 95 240sx with a built sr20det. I am looking to sell this car or trade for complete drift car at equal value, but for the reason being i want to sell it is i can't afford to finish the project because i have a family to raise and need the money or i can trade for a nice yamaha r6 plus cash on top or drift car complete. the car does run really well. What lacks on the car is bodywork, which i have b-magic 30mm wide body quarters to go with it. it is a 4 lug setup being a base model. i also have a z32 maf that i will also throw in with the purchase which it is not hooked up yet due to changing the map on the standalone. it needs suspension setup because it still has the factory shocks and springs on it. I do have more pictures to show and also the car running as well. SERIOUS INQUIRIES PLEASE DON'T WASTE MY TIME AND YOURS. I am asking 9000 and IT IS NEGOTIABLE, I have atleast $14,000 in mods alone under hood of the car which also include the labor that was done at the machine shop and other goodies to get it running. here are my list of mods. the motor has 14,000 miles on it water pump and thermostat was replaced a few hundred miles ago and new turbo setup was replaced a couple thousand miles ago and never reached over 15lbs. if you have any questions email me at [email protected] the only thing that is coming off is the apexi adapter, filter and maf which does not belong to me. but i can install the z32 maf and new filter on the car to run but have to change the map on the ecu. I will post pics of what you guys request for Thanks.


FOR FASTER RESPONSE TEXT 270-303-4873

Mod List

Freddy Oil Pan
ACL Std. race bearings (main, rod, and thrust)
Cp Pistons (86.5mm)
Bored block (.20over) (Revolutionary Performance & Machine)
New oem timing chain kit and tensioner
ARP rod bolts
New oem front main seal
New oem rear main seal
1.7mm Cometic Headgasket (87.0mm)
3 angle valve job
Brian Crower SS valves standard size
New oem valve guides
New oem valve stem seals
Greddy Rocker Arm Stoppers
Ported Intake & Exhaust
ARP Head Studs
Freddy Intake Manifold
Custom t3/t4 top mount manifold
custom downpipe
Comp turbo CT5762w/ Polished Intake Housing 550hp rating max. boost is 35lbs.
custom braided oil lines and coolant lines
Nismo adjustable FPR
Summit fuel pressure gauge
Tial 38mm wastegate (1.0 bar spring)
Tial 50mm BOV
Koyo radiator
Cx racing Intercooler
Cx racing 3in intercooler piping custom fit
PTP turbo blanket
Nismo pivot ball
exedy lightweight flywheel
6 puck clutch and pressure plate (tennessee clutch and supply)
prosport oil sandwich plate
prosport oil pressure sending unit and gauge
prosport water adapter
prosport temp sensor
prosport water temp gauge
prosport boost gauge
auto to manual swap
oem shifter bezel
nismo gt shift knob
red top optima battery located in trunk
18in excel wheels w/ 225/40/18 new tires
mishimoto racing thermostat
isis water pump
cx racing radiator hoses
z32 maf and pigtail
Nistune full standalone
circuit sport oil catch can
b-magic 30mm widebody quarters
740cc injectors (deatschwerks)
Ebay n-1 exhaust and test pipe
7 layer exhaust gasket
255 walboro fuel pump
z32 fuel filter


http://i616.photobucket.com/albums/tt246/zenkizilvia/s14%20project/portedonexhaustside.jpg
http://i616.photobucket.com/albums/tt246/zenkizilvia/s14%20project/pistonon4cylinder.jpg
http://i616.photobucket.com/albums/tt246/zenkizilvia/S14%20for%20sale/IMAG0100.jpg
http://i616.photobucket.com/albums/tt246/zenkizilvia/S14%20for%20sale/IMAG0162.jpg
http://i616.photobucket.com/albums/tt246/zenkizilvia/S14%20for%20sale/IMAG0160.jpg

video of the start up of the car to insure that it is running

‪April 15, 2011 12:09 PM‬‏ - YouTube (http://www.youtube.com/watch?v=wcpnK4up-C8)

‪Sr20det startup‬‏ - YouTube (http://www.youtube.com/watch?v=jIDfS9gmFQ0)

FOR FASTER RESPONSE TEXT 270-303-4873

ZeNkI SiLvIa
08-15-2011, 01:58 AM
This car will be street tuned this week hopefully to all that who are scared of an untuned car will now be tuned.

ZeNkI SiLvIa
08-26-2011, 11:15 PM
i am willing to take parts off to drop the price down a bit or trade for a bike/drift car

ZeNkI SiLvIa
09-27-2011, 12:58 AM
I am having a new radiator replaced and new fans installed due to the fact the original fan is not pulling the heat fast enough and the bov will be taken off of the piping due to the fact that nistune does not offer atomospheric bovs on the settings of the program their for if you blow off car stalls out. so doing a blow through setup z32 maf on intake side. price bump 7500 OBO.

ZeNkI SiLvIa
10-10-2011, 11:15 AM
Ok guys will take trades with cash on top to even out the price im asking for you guys. Throw me some offers.

kaosthagreat
10-13-2011, 07:55 PM
bump for you. You're probably gonna have to come down on the price a lil. Gonna be a tough sell especially in your neck of the woods.

ZeNkI SiLvIa
10-15-2011, 05:16 PM
trade pending...

RB Me
10-15-2011, 06:46 PM
bump for you. You're probably gonna have to come down on the price a lil. Gonna be a tough sell especially in your neck of the woods.

I'd suggest more than little if your really wanting to sell.

Hopefully your trade works out.

ZeNkI SiLvIa
10-18-2011, 01:01 AM
well thanks for the comments if trade doesn't go through i will be parting the entire car out completely.

ZeNkI SiLvIa
11-01-2011, 12:49 AM
alright guys price went down to 7k i am willing to take offers or whatever you have to trade with a little cash on top. first person who text me or call me i am willing to go down on the price on what i just now posted which is 7k. need this thing gone asap good track car project that already has built motor you just need to finish whatever your preference may be.