s14 auto to 5 speed swap question

[240sxDude]

Ok so im doing the 5 spd swap on a 95 240sx

my problem now is.....

this stupid pilot bushing, i have tried getting this thing out for 2 days (not coming)

i have used:

pilot puller tool (broke 1, got another 1)
Alignment tool (from clutch kit) fill with grease
Socket n ext fill with grease

[240sxDude]

Help!!!!!!!!!!

[EvBot DET]

Autozone rents a tool that'll do it. See pic below. It was hilariously easy w/ this thing. I did the same thing, banging my head against the wall for days... Then I found this thing and yanked it out in about 5 seconds lol

Bearing puller autozone image by eswansiger on Photobucket (http://media.photobucket.com/image/bearing%20puller%20autozone/eswansiger/P8220286.jpg)

[nismo627]

pipe wrench on the end. thats how i got mine off. have someone hold a socket and rachet or wrench on the crank pully nut. put the pipe wrench on the auto bushing and twist it back and forth and it will right off.