3rd cylinder leak injectors

[flushALA$]

So i just got my 240 out of the shop did an sr20det swap from a KA. It seems to have an injector leak on my 3rd cylinder..my whole block is rebuilt..how do i go to this part wise..

[LimeLite Racing]

Replace the O-rings. You rebuilt your bottom end, but you didn't get a gasket kit from Nissan for the rest of the engine? :picardfp:

[flushALA$]

I had a shop to do it...heres a video of my car starting up notice the misfire but stops at :30 ‪SR20DET Swap‬‏ - YouTube (http://www.youtube.com/watch?v=g1BsDH6Wi8w)

[LimeLite Racing]

It sounds like you have the worst misfire of your life. It will definitely be an easy fix.
Are you certain that your fuel injector is leaking? It could be clogged, in which case you can blast it out with parts blaster cleaner, which works great for injectors. Check the gap in those plugs, as well as your coil pack harness. How did you manage to narrow it down to the number 3 injector? Also, how could a shop turn you over a swap in that condition? I would go back and punch someone in the face.