Soloman
07-26-2011, 05:51 PM
Rawbrokerage twin scroll turbo manifold- the first one made, some changes have been made to the current ones but not too much.
Pictures are on this link, sorry for the inconvenience. More pics to come tomorrow.
RB/ 240 parts for sale | Facebook (http://www.facebook.com/media/set/?set=a.2140166177308.120838.1040783254&l=7c17006b2d&type=1)
-t3 twin scroll with Tial v-band flanges, 2000deg. inside and out ceramic coated Sched 10 stainless steel
-gt35r .82 Exh. ball bearing with anti-surge compressor housing and v-band outlet
-twin Tial mvs waste gates, one is a little faded due to it being so close to the
manifold and down pipe
-waste gates will come with dump tubes. both are slash cut and dump after the rack
(sounds so sick) also in a good place to put right back into the down pipe.
-Down pipe, v-band 3" to cat, has 1 02 bung
-K&N air filter and coupler with elbow
-all the turbo lines you will need. with all AN fittings.
-hard line to soft to hard line feed. to keep away from heat
-oil drain
-coolant feed and return
- also will include the an fittings that are on the block for the oil drain and feed
Complete kit for 3000 b.o. may split up if no hits
This is a complete bolt on kit, my car is tuned with a Haltech pro platinum plug and play ecu. Right now I am making around 400 wheel on 15.5lbs. The car is not near its potential, barely any timing being pulled out of it very safe. This setup is a blast, and i have had it on my car for a year and a half now. drift with it occasionally when i can make it to an event. Best way to get a hold of me is through text or call, but you can email me as well.
Other things for sale:
Hks 256 cams, just dyno time. like new-400
Haltech Pro platinum plug and play ecu-1200
Racepak dash-600
Evo 8 Brembos with brackets, rotors, and pads-750
Rb25 series 2 long block-900
Rb25 Transmission-800
s13 driveshaft- 200
Top hat rb25 motor mount set-75
everything is best offer but no BS, real offers. quality s*** no junk here
Email- [email protected]
Phone- 407.803.2956
Thanks for looking
Dan
Pictures are on this link, sorry for the inconvenience. More pics to come tomorrow.
RB/ 240 parts for sale | Facebook (http://www.facebook.com/media/set/?set=a.2140166177308.120838.1040783254&l=7c17006b2d&type=1)
-t3 twin scroll with Tial v-band flanges, 2000deg. inside and out ceramic coated Sched 10 stainless steel
-gt35r .82 Exh. ball bearing with anti-surge compressor housing and v-band outlet
-twin Tial mvs waste gates, one is a little faded due to it being so close to the
manifold and down pipe
-waste gates will come with dump tubes. both are slash cut and dump after the rack
(sounds so sick) also in a good place to put right back into the down pipe.
-Down pipe, v-band 3" to cat, has 1 02 bung
-K&N air filter and coupler with elbow
-all the turbo lines you will need. with all AN fittings.
-hard line to soft to hard line feed. to keep away from heat
-oil drain
-coolant feed and return
- also will include the an fittings that are on the block for the oil drain and feed
Complete kit for 3000 b.o. may split up if no hits
This is a complete bolt on kit, my car is tuned with a Haltech pro platinum plug and play ecu. Right now I am making around 400 wheel on 15.5lbs. The car is not near its potential, barely any timing being pulled out of it very safe. This setup is a blast, and i have had it on my car for a year and a half now. drift with it occasionally when i can make it to an event. Best way to get a hold of me is through text or call, but you can email me as well.
Other things for sale:
Hks 256 cams, just dyno time. like new-400
Haltech Pro platinum plug and play ecu-1200
Racepak dash-600
Evo 8 Brembos with brackets, rotors, and pads-750
Rb25 series 2 long block-900
Rb25 Transmission-800
s13 driveshaft- 200
Top hat rb25 motor mount set-75
everything is best offer but no BS, real offers. quality s*** no junk here
Email- [email protected]
Phone- 407.803.2956
Thanks for looking
Dan