redtop SR harness wired for 97 s14 with A/C NO ABS

[nism014]

This harness works and was used on a 97 S14 with A/C (KA compressor)

Engine harness info: Wired and loomed nicely with slack for the ECU to come out for easy tuning. Ignitor chip is wired to sit inside the car by the ECU.

Transmission harness info: The transmission harness is missing the reverse position sensor plug and the neutral position sensor plug. you can re-use your KA plugs if you have them.

Asking $200 shipped for both!


Trans Harness:
http://i913.photobucket.com/albums/ac340/nismo14/car/IMAG0783.jpg

Engine Harness:
http://i913.photobucket.com/albums/ac340/nismo14/car/IMAG0782-1.jpg

http://i913.photobucket.com/albums/ac340/nismo14/car/IMAG0781.jpg

http://i913.photobucket.com/albums/ac340/nismo14/car/IMAG0780.jpg

http://i913.photobucket.com/albums/ac340/nismo14/car/IMAG0779-1.jpg

http://i913.photobucket.com/albums/ac340/nismo14/car/IMAG0778-1.jpg

[nism014]

up for price change. Just get this out of my hands.

[Volcom887]

ill give u 100 for it lmk... will this work for a 95? i mean it should

[nism014]

I'm not that desperate. keep your $100 for another harness that you'll have to wire yourself.

yes it will work (plug and play) for any year s14 however, the pinout for 97 A/C is different. So if you're going to use A/C, then you'll need to repin it for your year.

Also, I did not pin ABS in this harness so if your car has ABS it will NOT work.