Ramonesfreak2010
07-24-2011, 05:25 PM
Whats up guys? I want to try something new, so I have here my redtop sr20det which was built (bottom end only) by MA-Motorsports in Baltimore, MD. The engine has only 5,xxx miles. Has a lot of aftermarket parts. I'm not looking to really part it out. I'd like to sell it as a package. This car was never raced or drifted in. Just daily driven to school, work, and wherever I was going. lol Its super clean.
Here are the specs.
Redtop SR20DET
Purchased from Elite JDM
Wiring harnesss was done by Tyler Durdan
Bottom end internals
-CP pistons
-Eagle rods
-OEM thrust washers
-New bearings (Don't know what brand, provided by MA-Motorsports)
-ARP head studs
-ARP main studs
Engine parts/accessories
-New OEM oil pump
-Apex'i metal headgasket
-NGK spark plugs
-OEM S15 turbo manifold gasket
-Megan Racing manifold
-Isis turbo lines
-New turbo gaskets
-Isis turbo outlet pipe
-Isis test pipe
-Megan Racing downpipe
-New oem intake manifold gasket
-Nismo engine and transmission mount
-Isis air filter**
-Isis radiator**
-New OEM fanshroad**
-OEM sidemount intercooler
-Supertech Exhaust valve guides
-Greddy Rocker Arm Stoppers
-Replaced valve cover gasket
Drivetrain
-Spec Stage 3 clutch**
-Fidanza flywheel**
-Isis short shifter
** = Only 1,1xx miles on it
Thats all I have from the top of my head. I have receipts for EVERYTHING!
Details on what was done on the engine (COPIED FROM INVOICE)
-Clean block and associated parts,
-Deck block .007
-Bore and hone block
-Balance crank, rod bearing and main bearings
-Polish crank
-machine .010 off pistons
-Assemble short block(install rotating assembly)
-Clean all head parts
-Competition valve job
-Valve seals
-Valve guides
-Mill head .003
-Pressure test head
-Replace exh. valve guides
Pics
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/247515_10150618737605184_731665183_18623105_751212 _n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/253165_10150605431995184_731665183_18465719_681652 5_n.jpg
http://i144.photobucket.com/albums/r192/ramonesfreak2010/head-1.jpg
**This picture was taken a few days ago. Thats how clean it is**
*When I first did the swap in my 1st S13*
http://farm3.static.flickr.com/2734/4305126505_2a7b771701_b.jpg
http://farm5.static.flickr.com/4072/4297175851_ee6d4a463a_b.jpg
Not sure if I'm missing anything else, but if I do, I'll update the thread. Please feel free to ask any questions or request pictures.
Update 9/17: Asking for $3k firm!!! But excludes, radiator, fan shroud, clutch fan, coolant housing (exhaust side), and intake filter.
The ONLY trade I'm looking for is a RUNNING DOHC S13 (Hatch preferred).
I can be reached here via PM or at 2403980687 (txts preferred)
Thanks for looking! Hook me up with a free bump please! lol
Here are the specs.
Redtop SR20DET
Purchased from Elite JDM
Wiring harnesss was done by Tyler Durdan
Bottom end internals
-CP pistons
-Eagle rods
-OEM thrust washers
-New bearings (Don't know what brand, provided by MA-Motorsports)
-ARP head studs
-ARP main studs
Engine parts/accessories
-New OEM oil pump
-Apex'i metal headgasket
-NGK spark plugs
-OEM S15 turbo manifold gasket
-Megan Racing manifold
-Isis turbo lines
-New turbo gaskets
-Isis turbo outlet pipe
-Isis test pipe
-Megan Racing downpipe
-New oem intake manifold gasket
-Nismo engine and transmission mount
-Isis air filter**
-Isis radiator**
-New OEM fanshroad**
-OEM sidemount intercooler
-Supertech Exhaust valve guides
-Greddy Rocker Arm Stoppers
-Replaced valve cover gasket
Drivetrain
-Spec Stage 3 clutch**
-Fidanza flywheel**
-Isis short shifter
** = Only 1,1xx miles on it
Thats all I have from the top of my head. I have receipts for EVERYTHING!
Details on what was done on the engine (COPIED FROM INVOICE)
-Clean block and associated parts,
-Deck block .007
-Bore and hone block
-Balance crank, rod bearing and main bearings
-Polish crank
-machine .010 off pistons
-Assemble short block(install rotating assembly)
-Clean all head parts
-Competition valve job
-Valve seals
-Valve guides
-Mill head .003
-Pressure test head
-Replace exh. valve guides
Pics
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/247515_10150618737605184_731665183_18623105_751212 _n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/253165_10150605431995184_731665183_18465719_681652 5_n.jpg
http://i144.photobucket.com/albums/r192/ramonesfreak2010/head-1.jpg
**This picture was taken a few days ago. Thats how clean it is**
*When I first did the swap in my 1st S13*
http://farm3.static.flickr.com/2734/4305126505_2a7b771701_b.jpg
http://farm5.static.flickr.com/4072/4297175851_ee6d4a463a_b.jpg
Not sure if I'm missing anything else, but if I do, I'll update the thread. Please feel free to ask any questions or request pictures.
Update 9/17: Asking for $3k firm!!! But excludes, radiator, fan shroud, clutch fan, coolant housing (exhaust side), and intake filter.
The ONLY trade I'm looking for is a RUNNING DOHC S13 (Hatch preferred).
I can be reached here via PM or at 2403980687 (txts preferred)
Thanks for looking! Hook me up with a free bump please! lol