240SX Engine & Suspension Parts

[Ni5mo180SX]

####, slick tires and rain arent the greatest combination. Who would have known? Well the cars totalled now but some parts are still intact such as the motor and some suspension bits. The motors a KA24E. It was modded with I/H/E,nismo cam, regrinded camshaft. The suspension had Eibach sportline springs, camber kit and Cusco rear bar with Trust front bar. Email me if anyones interested in any of the parts.

[geeaj]

How many miles on your motor? Where are you located? Ever done compression check on the motor?

Thank

JGee

[geeaj]

How much for your front bar? I presume this was a s13 hatchback? Also, what color interior do you have? If you have black or grey holla at me.

Late.

[Ni5mo180SX]

Im in Orange county, CA. The motor has 130k miles on it and I rebuilt the head at about 125k. The KA's pretty much bullet proof, the only weak spot being the head in my opinion, which is rebuilt. The interior trim is black. Email me at [email protected] for prices on the parts.

[iggy]

how much do you want for your sportline springs?

[drift freaq]

hey I tried emailing you about your strut tower bars and the email came back?? turn off your aol email block. anyways I am in LOs Angeles so get back to me. thanks

Hey I live in Los Angeles, just got my 90 240 hatch with 62K miles on it.  Anyways, i was interested in all the parts except the front strut bar (already ordered mine).  holla back

[Ni5mo180SX]

Sorry about the email block. Try it out now and it should work. And as far as the springs I also have the camber kit which id recommend and I'll probably just give them away with the springs to save whoever all the trouble of fucked up alignment.

[Ni5mo180SX]

Hey, just wanted to update that the front strut bar is no longer available. Thanks

[West]

What kind of camber kit is it?

[drifterx]

how much do u want for the cam? also do u have a header?
email me
[email protected]

thanks

[iggy]

do you still have the springs?

[Ni5mo180SX]

Hey, the camber kit is a eccentric bolt type. It helped me get the camber back into a reasonable range which was not possible without it. Im thinking about holding on to the motor because of how well its held up and performed in the past but for those interested I might be able to get new Nismo camgears from Nissan because I work at Toyota at a discounted price. And I still have the springs and header so email me if interested. Thanks

how much on the header?

[Ni5mo180SX]

The headers have about 4k miles on them. They're 2 piece 4-2-1 desgin.

[iggy]

sell me your springs if you still have them!! <img src="#/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[Ni5mo180SX]

Im willing to part with the springs for about 140 with camber kit if interested.

[Ni5mo180SX]

Hey I'll sell the Stillen intake for about $80 with all brackets and hardware. Its in excellent condition.

[silversx89]

<img src="#/f/iB_html/non-cgi/emoticons/yin-yang.gif" border="0" valign="absmiddle" alt=':yingyang:'> HOW MUCH FOR LOWER BLOCK ?
EMAIL ME [email protected]