help with xxr 527's in front of my s14!!!!!!

[ra21lover]

I was excited today to mount my wheels on my s14 i had bought the xxr 527 17x9.75 all the way around well anways i ve been reading u have to put a 5mm spacer in the fronts which i did but it hits my coilovers i am running megan streets i dont know what to do....getting frustrated rim the inner is hitting the collars....any input please....:picardfp:

[WERDdabuilder]

bigger spacer?

[ra21lover]

bigger spacer?
i tried stacking 3 mm spacer on top so = 8mm no luck iam running out of tread on my studs unless i extend them??? i see the s14 have no problems with what am i doing wrong>>>

[upsdude]

maybe you got the wrong offset? hate to break it to you but you're probably going have to get longer studs and bigger spacers if you're still rubbing the coils.

[SecretS13]

loosen the coil where is goes onto the knuckle, where the long bolts go in, pull on the rotor or hub towards u and tighten the bolts down.

hope that kinda makes sense, whats the offset? iam running 18x10 +22 up front and put a 15mm spacer and it still rubbed, losened the bolts pulled the wheel out and it doesnt rub anymore

[rob22]

did you get the 17x9.75+20?
you shouldnt be having a problem if you did.
i had 17x9 xxr 522+25 for about a week. i didnt have money for spacers or studs so i used small washers and i cleared.

[ra21lover]

did you get the 17x9.75+20?
you shouldnt be having a problem if you did.
i had 17x9 xxr 522+25 for about a week. i didnt have money for spacers or studs so i used small washers and i cleared.
yup i did 17x9.75 plus 25....does it matter if its 4 lugger???

[SecretS13]

do what i said

[ra21lover]

do what i said
okay thanks.......................camber leave it alone on the settings??

[SecretS13]

yea i have my chamber maxed out -

[SecretS13]

http://zilvia.net/f/s-chassis/204855-bolt-between-coilover-knuckle-spindle-help-fellow-zilvians.html

i did this and put a bolt like this so it wont losen back up and rub when i drive

[ra21lover]

http://zilvia.net/f/s-chassis/204855-bolt-between-coilover-knuckle-spindle-help-fellow-zilvians.html

i did this and put a bolt like this so it wont losen back up and rub when i drive
okay i loosen up the knuckles didnt work i pulled the hub towards me no movement....i max my camber out help out a little bit....still hits...:wtc:

[SecretS13]

only other bet i guess is extended studs with 10mm slip on

[h2v7]

i thought megan had some sort of extender,that mounts to the coilover bracket, or whatever you had to buy?

[zerodameaon]

get some 10 or 15mm bolt on spacers.

[ra21lover]

get some 10 or 15mm bolt on spacers.
okay i got the nismo extended studs today question should i get the 10mm or 15mm spacer??? will 10 mm do the job??? like i said before i just ried stacking the 5 and 3mm= 8 it helped a little it barely hits the collars....thanks for the input guys lmk thanks again....:ughug:

[Mi BEAN]

any pics?? please want these rims and want to see them on

[enkei2k]

sell the wheels and get better fitting ones.

[alexanderig]

On my s13 I had to run 15mm spacers with those wheels.

[ra21lover]

thanks for the help its all down 15mm fronts and 5 mil rears perfect.:eek2: