s14 SR MAF issues

[DriftVader]

hey guys so i been searching for quite a bit trying to find any layout on how the s14 sr MAF pins go. i know theres 3 wires going tot he maf plug. ones white which is signal, ones black which is ground and ones black/white which is power. does anyone know or have a diagram showing which pin goes to which wire? trying to figure this wiring issue out. my car has been running SUPER rich. thanks guys

[DriftVader]

also, im getting 12v on both my power wire to the maf and 12v on my signal wire to the maf ( only when the cars idleing tho) .... now doing some research i know thepower wire should be getting the 12v BUT the signal wire should be getting around .1v . any ideas on why i might be getting full power to my signal wire?

[0wn3r]

Do you have the right MAF for your motor?

Did you clean the sensor w/ MAF cleaner?

Check page EC-113 in Nissan 200sx / SR20DET FSM.

[DriftVader]

yes correct maf for the harness and ECU. i have 3 of them actually. and i have 2 cans of MAF cleaner ive been usin =)

il check out that page tho. thanks man!