KA24de-t Part out

[Origin]

All this is from a 1995 KA24DE. Since I've decided to go SR20, I'm selling my complete KA-T engine. I can sell i as a whole (although will need to be put together) or individual parts. I will list them into new and used. Pictures will be added much later. And parts will be listed as I come across them as well as prices. This is a full part out, I have basically everything. If you NEED something, ASK.

New:
Brand New Brian Crower +1mm valves. Both intake and exhaust - $320.
http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0389.jpg
Timing Chain. - $60
Tensioner A. - $65
Chain guide, tension side. - $15
Chain guide, slack side w/ the bolt to hold it in - $80
Tensioner B. - $65
Oil Strainer with gasket. - $30
Oil Pump with O-ring seal - $35
Clevite Main Bearings - $40


Used:
Forged Arias .020 over pistons w/ wristpins. 8.8:1. Used unknown miles but still good, will need spiral locks and rings. - $300

http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0384.jpg
http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0387.jpg

Forged K1 Technologies Rods - Just rebushed with Arias wristpins, will come with brand new ACL Duraglide 780 bearings. - $400

http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0377.jpg
http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0379.jpg
http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0385.jpg

Flywheel/New RPS Clutch Set-up with new bolts for flywheel and clutch cover. - Complete set-up. Not sure what stage it is, but was for a legit fast car. $400

JGS Cast Iron Turbo Manifold w/ what i believe is a T3 flange already welded to it- $225

Tial 38mm Wastegate - $150

Precision MSD style 72# Injectors low impedance - $150
Also have a top feed fuel rail I'd like to sell with the injectors. Tack on $25.

Jim Wolfe tuned ECU - tuned for '95, M/T, 72# Precision Inj., Z32 Maf, 3-Bar fuel pressure, and low compression 8.5-8.8. - $200

5-speed w/o driveshaft, unknown miles. - $200
With clutch mentioned above. - $500.

Stock looking Radiator with unknown electric fans. - $200.

Stock cranked polished and balanced to within a gram, comes with new chain sprocket, both seals, and oil pump drive - $100.

Block bored .020 over, freshly line-honed, with ARP fasteners and girdle. Has a small mark on top of cylinder 2, but told will not be a problem. Would prefer to sell with the pistons and rods. By itself. - $100. With forged internals. - $700. Can include main bearings mentioned above for $725. Does not include crankshaft. I can do that for $800.

http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0376.jpg
http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0386.jpg

KADE HEAD, will need valve guides, ported heavily although I never threw it on a flow-bench to determine how good it was. Have the rest of the head as well, just ask. - $50 including shipping.

http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0373.jpg
http://i554.photobucket.com/albums/jj404/hondafofiddyr/DSCF0375.jpg

KA24DE HEAD parts - have everything, if you need something PM and I will get a price for you.

Spray-painted orange valve cover. - Pay shipping.

Everything is sold as-is and shipping can be included depending on the item. Any questions just ask.

I have the ENTIRE engine so if you need anything I have it. Can even sell complete.

PM me here for any questions.

[ScRote20det]

how much you want for complete?

[Origin]

I will PM you pricing.

[wheelman167]

pics of manifold?

[MrChow]

where you located at?

also how many miles are on that clutch?

[souljaseth33]

Pics of rods? How many miles? Trades? Thanks

[Origin]

Looking to sell only, so, no trades.

I will be trying to get pictures of the major components soon, but, new stuff is new stuff. Not much to see there.

The rods I'm assuming around 15K, as that's what the sale advertised when I bought the car.

The clutch looks new, the ad also said "Clutchmasters stage 3" but it's an RPS on the cover, I don't know if that's some marketing BS or just a mistake. But I was told this car had somewhere around 270-300 whp before it was torn down.

[Origin]

No trades unless you have an unmolested s14 blacktop that I can drop in to my chassis..

[Origin]

I'll sell EVERYTHING for $2700 OBO. (I stress that last bit).

[silviadrag]

I am Interested in the head is also polished

[Origin]

Bumpin it up! $2700 takes all. Also have the turbo as well for extra.

[silviadrag]

I will take the head send me some pic [email protected]

[Origin]

Bumpin it up

[SiDwAyZ240]

I tried to pm you but it says your full. I think I only got $$ for the long block, where are you located so I can see how close you are.

[Origin]

Bumpin it up!

[AnonymousCoward]

Just curious, but why are you going sr20 now? I'm thinking about going ka24det but it's starting to seem almost as expensive as an sr20 replacement.

[Origin]

Well the engine has to be put together and I don't have the time or tools to do it.

And I like notchtop's a lot. I've just always wanted one.

It doesn't seem as expensive to me, you must just do it right.


Message to all who read:

I'm having trouble with pictures right now, I will try and have some up shortly.

[Origin]

Bumpin, some prices negotiable, throw offers!

[Origin]

New pictures up.

[Prime]

Sent PM about the crank

[S13ZX]

do u have any pics of that clutch?interested!

[Origin]

I may be finishing this.

[MomentumDrift-Tyler]

trade some of it for sr 1 peice aluminum drive shaft and b&m short throw?

[Origin]

Was that serious?

[racerx2k1]

I will PM you pricing.

No trades unless you have an unmolested s14 blacktop that I can drop in to my chassis..

I'll sell EVERYTHING for $2700 OBO. (I stress that last bit).

Bumpin it up! $2700 takes all. Also have the turbo as well for extra.

Bumpin it up

Bumpin it up!

Bumpin, some prices negotiable, throw offers!

New pictures up.

I may be finishing this.

2 bump limit. You can start new thread in 3 days.