PDA

View Full Version : CA RB25DET Stuff


mrflip69
07-08-2011, 12:34 PM
First dibs, before I throw it up on ebay.

All prices are obo. Sorry, no trades!

HKS GT2540 $900
No shaft play, seals are in perfect condition--still spools forever when you shut off your engine (double BB). I bought this used and put about 5k mostly hwy miles on it, boosting about 10-15psi.

S-Tec Sidemount Manifold $200
Should be able to put this on RB20/25/26. This is a quality tubular manifold ideally for response on stock or stock-ish turbos. Places the turbo in stock location (same as stock cast manifold).

Syko Turbo Elbow $100
Allows you to use an SR downpipe with the Syko RB25 mounts and stock turbo (or the GT2540 up above), while clearing the steering shaft. Nice stainless piece.

Pics coming soon, car is in shop. PM with any questions.

WhipsGoneWild.net
07-08-2011, 02:32 PM
How much power? And post pics

mrflip69
07-08-2011, 08:34 PM
I'm putting down about 300whp on a very conservative tune at about 12psi (10-15, depending on temp..). Also just found out lag times weren't right. This is nowhere near the efficiency range of the turbo... would be better off around 20psi.

HKS specs the turbo at around 350-370ps. The turbo is a direct replacement of the stock one. Think of it as a highflow job... good spool with decent top end.

Pics for reference until I can go to the shop and pick up the parts.

http://stec-motorsports.com/english/images/rb1.jpg
Product Details (http://stec-motorsports.com/english/product_details.asp?ItemNum=002)

http://www.sykoperformance.com/IMG_0739.JPG
SYKO Product 1 (http://www.sykoperformance.com/prod01.htm)

WhipsGoneWild.net
07-08-2011, 08:41 PM
i was goin to say im makin 252whp 274ftlbs on stock boost! im lookin to upgrade but workin on a few other bugs