Garrett-KYB-Bride-Turbosmart-Origin-RC-ETS-Turbo VQ-TONS AFTERMARKET+OEM 240 PARTS!*!

[Imarvin240]

1. NO BASHING PRICES OR PARTS! if you dont like it, please leave!
2. If you PM, please also bump the thread.
3. Im always adding more parts and pictures to the thread, so check back every so often.
4. More parts have been added as of...7-4-11

Engine and trans have about 25,000 miles on them and run perfect...will come with: (IM WILLING TO PART IT OUT!)

Engine
6-speed Transmission
Clutch - Stage 2
Flywheel
Wire Harness
ECU
Solid Motor Mounts

PRICE DROP: $2200 OBO - SOLD!
http://i134.photobucket.com/albums/q113/d3ebikingteam/31efe9ed.jpg
http://i134.photobucket.com/albums/q113/d3ebikingteam/0815627d.jpg

Custom VQ Turbo Setup has about 500 miles on it. Comes With: (IM WILLING TO PART IT OUT!)

Custom Manifold w/ Downpipe (V-Band) - SOLD!
- $850

Tial Wastegate (V-Band) - SOLD!
- $300

Garrett 3076 Ball bearing Turbo (V-Band) - SOLD!
-$1200

(ASK FOR PRICE AS A WHOLE!)
http://i134.photobucket.com/albums/q113/d3ebikingteam/bb43f2c7.jpg



MORE PARTS FOR SALE!

Bride RHD S14 FRONT Floor mats (Imported from Japan)
- NEVER USED
- PERFECT SHAPE
- $225
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc4/74257_489055006753_526896753_6996461_468437_n.jpg

Turbosmart Megasonic BOV
- Roughly 1k miles
- PERFECT SHAPE
- $125
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/270924_10150295781211754_526896753_9168721_1686118 _n.jpg
http://i590.photobucket.com/albums/ss347/matt11145/Decorated%20images/TONSofpartsforsaleTons008.jpg

Unknown Brand BOV
- Slightly Used
- PERFECT SHAPE
- $50
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/260219_10150277831526754_526896753_9059515_7032409 _n.jpg

S15 Hoods
- NEVER USED
- $225
http://i590.photobucket.com/albums/ss347/matt11145/Decorated%20images/carparts011.jpg

RC 1000cc Top Feed Injectors
- NEVER USED
- $300

Kisuu Custom Made Billet Top Feed Fuel Rail
- NEVER USED
- $150
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/180681_10150091810826754_526896753_7224552_4632343 _n.jpg

ETS Custom Made Intercooler 24X8X3
- NEVER USED
- PERFECT SHAPE
- $175
http://i590.photobucket.com/albums/ss347/matt11145/Decorated%20images/mattscar020.jpg

OEM Redtop Injectors
- USED
- PERFECT SHAPE
- $50
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/249952_10150270541186754_526896753_8987373_2523148 _n.jpg

Origin Canards w/ Custom Aluminum Under Shield
- NEVER USED
- PERFECT SHAPE (shiny parts are just the flash from the camera and some of the mounting holes)
- $180
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/253910_10150270541001754_526896753_8987372_803846_ n.jpg

S13 Black top ECU
-Perfect SHAPE
- $125
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/249709_10150270541466754_526896753_8987376_5044642 _n.jpg

Garrett 3071 BB Turbo with 4 bolt turbine housing
- ~300 miles
- PERFECT SHAPE
- $1100
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-ash4/247593_10150270541656754_526896753_8987378_2913892 _n.jpg

ROSS TUFFBOND Harmonic Balancer (Rated to hold 1500hp and retails for almost $500)
-ONLY MOUNTED
-PERFECT!
- $375

ROSS TUFFBOND Water Pump Pulley
-ONLY MOUNTED
-PERFECT!
- $90
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/260361_10150277830881754_526896753_9059504_6580333 _n.jpg
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-ash4/270911_10150295782011754_526896753_9168752_4576204 _n.jpg

S13 KA24DE ECU (Calum Board Chipped)
- PERFECT SHAPE
- $190
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/260134_10150285167391754_526896753_9099070_5767321 _n.jpg

S14 SR20 88.5mm Cometic Metal Head Gasket multilayer
- NEVER USED
- PERFECT SHAPE
- $70
http://a1.sphotos.ak.fbcdn.net/hphotos-ak-snc6/260134_10150285167396754_526896753_9099071_8124243 _n.jpg

KYB S13 Struts - SOLD!
- USED
- Great Shape
- $150
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/260077_10150295781836754_526896753_9168746_3443114 _n.jpg

OEM SR20VE Valvetrain (IN+EX Valves, Springs, Cams, Gears)
- 15,000 Miles
- PERFECT!
- MAKE OFFERS ON WHAT YOU NEED!
http://a5.sphotos.ak.fbcdn.net/hphotos-ak-snc6/263160_10150277831281754_526896753_9059511_892660_ n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/261365_10150277831226754_526896753_9059510_6151981 _n.jpg

Peakboost Downpipe - SOLD!
- Roughly 500 miles
- PERFECT SHAPE
- $100

S14 Non-ABS Driveshaft
- Used
- $110

S13 Non-ABS Driveshaft
- Used
- $110

S13 SR Transmision - SALE PENDING
- Roughly 30k miles
- PERFECT SHAPE
- $150


These are all the make an offer items...i dont want or need them all so just make an offer...pictures of these upon request...its to many pictures for the thread.

S13 SR OEM Coil Pack Cover
BNIB SR Multi Layer Exhaust Gasket
BNIB OEM SR Exhaust Gasket
SR OEM Exhaust Manifold w/ Heat Shield
(1) V1 Godspeed S13 Toe Arm
(1) V1 Godspeed S13 Traction Rod
BOV (i think it was a turbo XS...i have had it in my garage for almost 3yrs)
Valve Cover Gasket
Valve Cover Coil Plug Gasket
Water Outlet
Water Inlet
(4) Cam Oil Tubes (2 Sets)
(16) OEM Spring, Retainer, and Keeper (1 set)
(8) SR OEM Intake Valves (1 set)
(8) SR OEM Exhaust Valves (1 set)
(8) SR OEM Rocker Arm (1 Set)
(8) SR OEM Lifter (1 Set)
SR Block (bare) w/ 87mm bore (needs align bore...roughly 200 at any machine shop)
SR20 Front Cover w/ Oil Pump
(2) Oil sandwich plate Galley w/ sensor
(2) Upper Oil Pan
(2) Water Pump
Water Pump Pulley
(3) Rear Crank Case Cover
Crank Pulley
(4) SR Oil Squirters (1 Set)
(3) SR OEM Rod
(4) Upper Oil Pan Screen (2 Sets)
(3) Different SR20 Timing Chain Guides
(3) SR Timing Chain Tensioner
(2) SR Main Cap Girdle
(2) Alternator Bracket
AAC Valve
(3) Knock Sensor
(3) Coolant Tubes
(2) Thermostat Housing
(2) Coolant Temperature Sensor Housing
3” S14 Exhaust that was very hacked up but it has a Very good condition HKS muffler
Turbo Blanket (was on a T67)
SR Transmission Plate
SR OEM Turbo Lines
S13 Rear OEM Chamber Arm
S13 Rear OEM Traction Arm
S13 Rear OEM Toe Arm
stock KA24de fuel pump (in working order)
stock KA24de header + stock heatsheild
stock KA24de airbox intake system and Filter is still clean
Summit Liquid Fuel Pressure Gauge

SOME PHOTOS, MORE TO COME!

http://a1.sphotos.ak.fbcdn.net/hphotos-ak-ash4/264619_10150295780826754_526896753_9168712_1194897 _n.jpg
http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/261695_10150295780901754_526896753_9168714_5274060 _n.jpg
http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc6/263518_10150295781091754_526896753_9168718_4183737 _n.jpg
http://a2.sphotos.ak.fbcdn.net/hphotos-ak-ash4/268752_10150295781571754_526896753_9168735_3370877 _n.jpg
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/267714_10150295781351754_526896753_9168726_657620_ n.jpg
http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/268375_10150295780671754_526896753_9168708_978835_ n.jpg


FWD SR20DE...EJ20...SR20VE- If you need any parts for one of these motors, let me know…im sure I’ll have them.

[nismoracingsx]

What springs are mounted on the kyb struts?
Any idea on the mileage on em?
Are you shipping? Zip 31405

[zurud]

How much for s13 kyb struts shipped to 47714?

[ehhhregartless]

Is the s13 driveshaft 1 piece or aluminum? Pics?

[Imarvin240]

What springs are mounted on the kyb struts?
Any idea on the mileage on em?
Are you shipping? Zip 31405

How much for s13 kyb struts shipped to 47714?


don't really think i want to ship them...i think it would probably cost a bit to ship them anyways.


Is the s13 driveshaft 1 piece or aluminum? Pics?

its just an OEM driveshaft.

[WhipsGoneWild.net]

Bump for fellow PA Nissan dude

Glws man

[Tantwoforty]

whats the ka ecu tune for?

[nicopico24]

how much for the valve train? what size cams are those?

[Imarvin240]

whats the ka ecu tune for?

555cc injectors
35r turbo setup
fully built ka-t engine

how much for the valve train? what size cams are those?

its all the OEM valvetrain from a sr20ve head...just make me an offer.

[ehhhregartless]

$25 shipped for the Turbo blanket to 18509?

[02specvq]

Cash in hand for the peakboost dp. Do you have the vband clamps also? I know you said you didn't have the adaptor.
Pmd you again, never heard back from you on the last thread.

[paintkilz]

do the kybs have a lowering spring or is it stock height?

shipping to 50310?

[Plastik240se]

pic of stock ka air system, shipping to 98502?

[Imarvin240]

$25 shipped for the Turbo blanket to 18509?

thats a bit to low for a 160 dollar turbo blanket. im not thinking 100 or anything, but i am thinking a bit higher then 25

Cash in hand for the peakboost dp. Do you have the vband clamps also? I know you said you didn't have the adaptor.
Pmd you again, never heard back from you on the last thread.

downpipe sold to you and is on its way to you

do the kybs have a lowering spring or is it stock height?

shipping to 50310?

they do have a lowering spring, but im not sure about shipping them...you guys know it will cost a bit to ship them, correct?

pic of stock ka air system, shipping to 98502?

i will get you a picture today.

[h11m1vn]

how much for the fuel pressure gauge? shipped to 72833? lmk

[TollieLifted]

want the KYBs.
Pm'd you.
ttt

[Alex Rodriguez]

Interested in the injectors, summit gauge pm your way

I cant send you a pm its not allowing me to click your name so PM me

[khon240sx]

KYB S13 Struts
- USED
- Great Shape
- $150

springs rate?
how low they drop both front and rear?

[Imarvin240]

how much for the fuel pressure gauge? shipped to 72833? lmk

make an offer

want the KYBs.
Pm'd you.
ttt

springs rate?
how low they drop both front and rear?

k, they drop the front and rear about 2in...not sure of spring rate

[Imarvin240]

bump #1

BUY THIS STUFF!

[Big_E-Dog]

is that blanket used or new??

[coupe92]

Pm'd about injectors

[Imarvin240]

is that blanket used or new??

the turbo blanket is used but is also currently pending.

full Turbo VQ35 setup is sold!

[Imarvin240]

BUMP # 2

make offers guys...i have no use for this stuff anymore. i will still say no to the lowballers though :)

[lkp_s13]

Need one set of cam oil squirters, the piston oil squirters, and the keepers. Pm sent

[lkp_s13]

Pmed you never heard back. Parts still for sale?

[Imarvin240]

Pmed you never heard back. Parts still for sale?

i'll PM you back but this is the older thread hah mods you can go ahead and lock this one.