mwilloughby87
07-05-2011, 09:49 AM
Name: Matt Willoughby
Location: Smyrna
Items: See Below
Contact: PM me, post in thread, or text at SIX 15 four82one737
Wellllll........I've been putting off doing this long enough trying to make a decision as to what to do, but I've finally come to the realization that it's best for me to do what I'm about to do. I've got so much stupid money in this build and I will definitely be taking a hit on it, but I've gotta sort out some of my own things and start over with what I think will be best for me, and my family in the long run. More stuff will be added as I get to it. And no, I will not sell you misc. pieces from the chassis.
So without further adieu here goes everything....pics will be added over the next few days.
And if someone is willing to dish out the cash for the whole thing, I will give them a deal on the whole shebang.
Haters keep your comments to yourself, or your comments will be deleted. If you feel you have something to say to me, then PM me, as opposed to ruining my thread.
Parts can come in packages for a bit better pricing, or it can be split up if I get enough interest in the whole thing.
Dual Fuel pump setup for S14
Includes 2 Walbro in tank 255 pumps, The top for the return/feed lines, -6an lines for 2 feeds and 1 return, and (2) -6AN inline fuel filters. The setup was made to fit a 2jz, however, there is enough room to modify it to fit on any setup as the 2jz is on the opposite side and has to cross underneath car.
$350
If separately:
Walbro Fuel Pumps (x2) Part Number GSS341
$60 a piece
Aeromotive FPR with gauge
$200
Dual Pump Assembly/Hangar with no pumps:
$100
-6AN Inline Fuel Filters
50
-6AN Line with fittings allowing for inline filters
$125
FMIC $150
Piping $400
ISIS Suspension arms for S14. No I don't know the differences, nor what will interchange. ( I lied, I know the tension rods will, but not sure what else). They are all powdercoated starlight purple except the rear traction rod.
$300
Megan Racing Track Series Coilovers (Only miles have come from towing, and rolling around my shop)
$800
Oil Lines for a 2JZ turbo setup, but will work with others obviously depending on your fittings.
$75
-10AN Drain line
-4AN Feed line
Tial 44mm Wastegate (Tial Purple Color with 11psi spring)
$300 bucks. Comes with firing ring, however it will need the vacuum nipple on top
Tial Q BOV (Tial Purple Color)
$200
AEM UEGO Wideband
$150
AEM Trueboost Boost Controller (opened to inspect but other than that, BNIB)
$225
Samco Radiator Hoses for 2JZ (Water pump side has been slightly modified)
$75
R154 Slave Cylinder
$30
AEM EMS Version 1 (Will include AEM 3 bar map sensor and AIT Sensor)
$1000
Hawk HPS Brake Pads for Z32 (30mm) Front and Rear
$120
Drilled and Slotted Rotors for Z32 Front and Rear
$120 or $70 per set
S Chassis Conversion Lines for Z32 Brakes
$75
Mishimoto Radiator (Originally for SR, however top inlet was cut off to be modified for 2jz, however can be welded back on for serious buyers)
$100
Version Select Front Bumper
$200
Sideskirts and Rear Aero (can't remember brand off hand, but I wanna say its version select as well)
$250 for both, or 150 a piece
Minty Ass S15 Headlights
$350
3 Inch Turboback Exhaust for S14 with JZ Engine Swap (no catalytic converter-- straight back)
$350
JZ Mount Kit for S Chassis
Includes 2 engine mounts, and transmission cross member
$250
1 Piece Steel Driveshaft for 2JZ into S Chassis.
$200
2JZ GTE Engine with Brian Crower Valve Train *272 cams, and BC Valve Springs and retainers...mild port cleanup work, upgraded alternator, Titan Motorsports adjustable cam gears, aluminum water pump pulley, and alternator pulley as well. Intake Manifold tapped for AEM AIT and AEM Map Sensors, -10an Fittings welded to valve covers as well. Will come with all sensors and throttle body with TCS. Turbo Manifold can be included for the right price as well. Waterpump is new, along with timing belt. Motor has been cleaned up and painted. Does not come with fuel rail, or turbo
$4000
S Chassis Bride Seat Rails
$200 for both
Crow Harnesses (purple)
$150
Circuit Sports Quick Release and Thin Hub
$125 for both
Adapter to run Brembo 350z rotors on front of s chassis
$75
240SX Solid Motor Mounts
$85
3 inch Downpipe (Ebay 3 inch downpipe for 2jz)
$75
Items in RED are SOLD
Location: Smyrna
Items: See Below
Contact: PM me, post in thread, or text at SIX 15 four82one737
Wellllll........I've been putting off doing this long enough trying to make a decision as to what to do, but I've finally come to the realization that it's best for me to do what I'm about to do. I've got so much stupid money in this build and I will definitely be taking a hit on it, but I've gotta sort out some of my own things and start over with what I think will be best for me, and my family in the long run. More stuff will be added as I get to it. And no, I will not sell you misc. pieces from the chassis.
So without further adieu here goes everything....pics will be added over the next few days.
And if someone is willing to dish out the cash for the whole thing, I will give them a deal on the whole shebang.
Haters keep your comments to yourself, or your comments will be deleted. If you feel you have something to say to me, then PM me, as opposed to ruining my thread.
Parts can come in packages for a bit better pricing, or it can be split up if I get enough interest in the whole thing.
Dual Fuel pump setup for S14
Includes 2 Walbro in tank 255 pumps, The top for the return/feed lines, -6an lines for 2 feeds and 1 return, and (2) -6AN inline fuel filters. The setup was made to fit a 2jz, however, there is enough room to modify it to fit on any setup as the 2jz is on the opposite side and has to cross underneath car.
$350
If separately:
Walbro Fuel Pumps (x2) Part Number GSS341
$60 a piece
Aeromotive FPR with gauge
$200
Dual Pump Assembly/Hangar with no pumps:
$100
-6AN Inline Fuel Filters
50
-6AN Line with fittings allowing for inline filters
$125
FMIC $150
Piping $400
ISIS Suspension arms for S14. No I don't know the differences, nor what will interchange. ( I lied, I know the tension rods will, but not sure what else). They are all powdercoated starlight purple except the rear traction rod.
$300
Megan Racing Track Series Coilovers (Only miles have come from towing, and rolling around my shop)
$800
Oil Lines for a 2JZ turbo setup, but will work with others obviously depending on your fittings.
$75
-10AN Drain line
-4AN Feed line
Tial 44mm Wastegate (Tial Purple Color with 11psi spring)
$300 bucks. Comes with firing ring, however it will need the vacuum nipple on top
Tial Q BOV (Tial Purple Color)
$200
AEM UEGO Wideband
$150
AEM Trueboost Boost Controller (opened to inspect but other than that, BNIB)
$225
Samco Radiator Hoses for 2JZ (Water pump side has been slightly modified)
$75
R154 Slave Cylinder
$30
AEM EMS Version 1 (Will include AEM 3 bar map sensor and AIT Sensor)
$1000
Hawk HPS Brake Pads for Z32 (30mm) Front and Rear
$120
Drilled and Slotted Rotors for Z32 Front and Rear
$120 or $70 per set
S Chassis Conversion Lines for Z32 Brakes
$75
Mishimoto Radiator (Originally for SR, however top inlet was cut off to be modified for 2jz, however can be welded back on for serious buyers)
$100
Version Select Front Bumper
$200
Sideskirts and Rear Aero (can't remember brand off hand, but I wanna say its version select as well)
$250 for both, or 150 a piece
Minty Ass S15 Headlights
$350
3 Inch Turboback Exhaust for S14 with JZ Engine Swap (no catalytic converter-- straight back)
$350
JZ Mount Kit for S Chassis
Includes 2 engine mounts, and transmission cross member
$250
1 Piece Steel Driveshaft for 2JZ into S Chassis.
$200
2JZ GTE Engine with Brian Crower Valve Train *272 cams, and BC Valve Springs and retainers...mild port cleanup work, upgraded alternator, Titan Motorsports adjustable cam gears, aluminum water pump pulley, and alternator pulley as well. Intake Manifold tapped for AEM AIT and AEM Map Sensors, -10an Fittings welded to valve covers as well. Will come with all sensors and throttle body with TCS. Turbo Manifold can be included for the right price as well. Waterpump is new, along with timing belt. Motor has been cleaned up and painted. Does not come with fuel rail, or turbo
$4000
S Chassis Bride Seat Rails
$200 for both
Crow Harnesses (purple)
$150
Circuit Sports Quick Release and Thin Hub
$125 for both
Adapter to run Brembo 350z rotors on front of s chassis
$75
240SX Solid Motor Mounts
$85
3 inch Downpipe (Ebay 3 inch downpipe for 2jz)
$75
Items in RED are SOLD