S13 Competition FD SPEC Drift Car Part Out!!!!

[JSpecBnr32]

City: Lynnwood
State/Province: WA
Price: Below
Item Description:
So the time has come for me to Part with the Infamous Baby Dolphin one of the most treasured cars that I built thus far. I have other priorities that are more Important ATM so my favirote TOY of all time must go. This is an excellent Starting Point if initiating 4th gear drifts at 90mph and scraping wall on a slightly inclined 5/8ths mile oval track are your thing!
http://i160.photobucket.com/albums/t191/Jspecbnr32/31201_125175797497909_100000164695114_318677_65153 84_n.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/24195_413585386270_679921270_5513441_912029_n.jpg
Motor is not included but here is a pic of the motor that powered the baby dolphin drift machine!
http://i160.photobucket.com/albums/t191/Jspecbnr32/32060_127499863928115_100000043074973_311039_66543 06_n.jpg
Tandem with Walker at PGP
http://i160.photobucket.com/albums/t191/Jspecbnr32/74652_10150112673531271_679921270_7931618_5465813_ n.jpg
Tandem with Walker at Evergreen Speedway
http://i160.photobucket.com/albums/t191/Jspecbnr32/24335_422128261270_679921270_5739629_1570095_n.jpg
Tandem with Alex Phifer at Irwindale Speedway
http://i160.photobucket.com/albums/t191/Jspecbnr32/24195_413585391270_679921270_5513442_4515233_n.jpg
Getting Dyno Tuned at PSI (Portland Speed Industries)
http://i160.photobucket.com/albums/t191/Jspecbnr32/31259_120909027939825_100000621865372_164617_27127 50_n.jpg

[JSpecBnr32]

http://i160.photobucket.com/albums/t191/Jspecbnr32/31988_1254910340263_1454700101_3055.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/24681_1429716187598_1373646196_1138.jpg

Chassis Modifactions:
-Full 6 point DOM tubing SCCA/Formula Drift approved roll cage with multiple diagonal tubing welded in strategically for structual support, door X-bars, halo bar, rear strut bar with down bars from main hoop, Main hoop is also welded directly to B-pillars for added strength. Cage was done at Race Craft in Woodinville (same Building as Garage Autohero) this shop specializes in building and fabricating High End Race Cars mostly Porsches, Bmws along with other European and Japanese cars. Cage was just under $3k
Street Car Status:
-Car does come with a clean Washington State Title with Washington Plates so if driving on the street is your thing it is totally a possibility. Shes totally a trailer queen though haha
http://i160.photobucket.com/albums/t191/Jspecbnr32/30056_426123351270_679921270_5831965_1412500_n.jpg
-This Shell is ready to Compete in Grassroots, Pro-Am and Formula D events.
-Approved Tow Hooks Front and Rear
-Approved Fire Extingusher mounted in an accesible area to the driver.
-Fully Wire Tucked and De-wired Factoy Chassis Harness
-Wheel Wells Clearenced for big wheels going high angle at a low ride height
-Rear Fenders cut for widebody
Pics of Cage
http://i160.photobucket.com/albums/t191/Jspecbnr32/IMG_3961.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/IMG_3959.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/IMG_2035.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/IMG_0007.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/32060_127499860594782_100000043074973_311038_64809 57_n.jpg
This is how the chassis will be sold. Blister kit and Piaa Rozza wheels not included. And Suspension and other items will be included depending on how you decide to purchase the car.
-Engine Bay is nicely painted Gloss White.
-This Shell is ready to Compete in Grassroots, Pro-Am and Formula D events.
-Approved Tow Hooks Front and Rear
-Approved Fire Extingusher mounted in an accesible area to the driver.
-Fully Wire Tucked and De-wired Factoy Chassis Harness
-Wheel Wells Clearenced for big wheels going high angle at a low ride height
-Rear Fenders cut for widebody
http://i160.photobucket.com/albums/t191/Jspecbnr32/IMG_0147.jpg
http://i160.photobucket.com/albums/t191/Jspecbnr32/IMG_0148.jpg

[JSpecBnr32]

Buy my OLD Blister Kit back which is up for Sale on NWN right now and have the exterior completed!!
http://www.northwestnissans.com/board/showthread.php?t=125968[/URL (http://[URL]http://www.northwestnissans.com/board/showthread.php?t=125968)]
Suspension
-Tein Drift Master Coilovers 8k/6k-$900
-Whiteline Adjustable Front and Rear Swaybars-$350 for both or $180 each
-K-sport Front Tension Rods-$80
-Cusco Traction Rods-$100
-Battle Version Toe Rods-$100
-Megan front Power Brace-$60
-Megan Rear Subframe Toe Arm Brace-$40
-Tein Inner s14 Tie Rods with Brand new Z32 Oem Outers..........$100
-Full s14 5ug Conversion including Garage AutoHero modded s14 Knuckles, s14 front and rear hubs, s14 Front Lower Control Arms............$600
-Full Z32 F+R Big Brake setup includes calipers, rotors, complete rear z32 drum ebrake setup with ebrake lines, and Stainless Steel S13/Z32 Conversion Brake lines-$500
-Solid Aluminum Subframe Bushings (none of that slip on subframe spacer crap)-$80
-Drift Spin Knob-$5
Electronics
-Apexi white Faced 60mm Boost Gauge with stand-$80
-Greddy 52mm Oil Pressure Gauge-$80
-Dohc s13 Cluster-$60
-Walbro 255 fuel pump-$70
-Pioneer Speakers-$20
Chassis
-Nismo 2-way LSD............................................... ........$600
-Circuit Sports Aluminum Over-Flow Tank-$60
-Dohc Power Steering lines with hi pressure line replaced with AN fitting and line-$100
-Apexi N1 Evo 3.5" catback exhaust-$350
-Dmax 180sx front square running lights-$50
-Custom Drivers Side sidemount seat rail-$40
-RJS Pink 3" SFA Approived 5 point racing harness-$40
-Yes Baby Blue Awesome 180sx rain gaurds will be included for free
ALL THOSE PARTS SEPERATY ADD UP TO =$4,465

PRICING
-Bare Rolling chassis with FD Spec cage, electronics, 5lug and z32 brakes.............$3000
+all the Suspension...................$4500
+Everything including Just the used parts adding up to $4,465 individually................$6000 <this is an ultimate steal considering the price of all the parts new. I Easily have over $10,000 invested in this car. Just Drop in a motor and your ready to drift!
Right now i would like to sell the whole car complete before i start parting anything out.
If your a serious Buyer Call/TXT me 425-760-7339 im also interested in trades something luxury or maybe a nice street bike lmk what you have.

[DJPimpFlex]

http://i2.photobucket.com/albums/y32/DJPimpFlex/ab832088.jpg

[Zenki_Kouki.5]

http://i160.photobucket.com/albums/t191/Jspecbnr32/IMG_0147.jpg
what kind of wheels are these?
and the specs. thanks

[Bushido]

^ do some legwork and figure it out for yourself, noob.

the name of the wheels has been mentioned in this thread and they've been on multiple cars over the past few years

[datpurpledrank]

steering wheel forsale i looked and didnt see?

[XiaoAZN]

are the dmax lights blinkers as well? or just the position lights.

[UNITEDMASTER]

You had it all.... so whats next.

[240zach]

fuel pump? pm me

[EjMalernee]

Are you willing to take out the Chassis Harness and sell it?

[armiller91]

If you decide to part out, Interested in:
Battle Version Toe Rods
Megan Rear Subframe Toe Arm Bar
DOHC Cluster
Nismo LSD
Circuit Sports Aluminum Over-Flow Tank

Wondering if you have any more Pics of these Items/Conditon/Mileage

Thanks

[ignited]

still have the tien inners and z32 outers for 100?

[ka-turbo]

has anybody ever heard anything from this guy!!!!!!!????
i want the whiteline adjustable sway bars PM me

[ignited]

i havent. im going to buy inner tie rods and outers elsewhere..

[gearhead55]

Hey if you decide to part this out, can i get the Z32 f/r brake set up? PM me! thank you.

[OkiDori17]

ill take the 5 point harness if you plan to part out
PM me

[Speed Junky]

If you decide to part out send me a PM - I'm local and can pickup the parts.

[JSpecBnr32]

ok so i am now parting out the car so lmk who is all interested in what and i will get back to you

call/txt=425-760-7339

[Thefat1]

Tein Drift Master Coilovers 8k/6k-$900 Shipped to CA 95476 plz :)

[armiller91]

Interested in:
Battle Version Toe Rods
Nismo LSD
Circuit Sports Aluminum Over-Flow Tank
Kouki Tails

Wondering if you have any more Pics of these Items/Conditon/Mileage
and what shipping on the LSD would be like

Thanks

[JSpecBnr32]

Taking offers on the whole shell with or without all the mods