PDA

View Full Version : KY KA-T engine and setup complete


andyv316
07-03-2011, 09:06 AM
Engine mods:
Rebuilt KA
new main and rod bearings
balanced rotating assembly
CP pistons .20 over
Eagle rods
Built head
Virrea Valves
JWT 272 cams with adjustable cam gears
BC titanium springs and retainers
Just pulled the head on it to find out what caused a lost in compression on one and two. Turns out the people that built the head didnt put the right shims on the intake valves causing them to tape the pistons. I took the head to a machine shop to check everything, no bent valves. So in other words it needs to be re shimmed with the right timing and should be good.

Turbo Kit:
JGS log manifold
rb t28 turbo
550 injectors
z32 maf
Tomei fpr
walbro 255
FMIC
BRand new HKS BOV


Drive-train:
Fidanza lightwieght flywheel
Spec stage 3 6 pluck
Short throw
tranny is bad, no 5th nor reverse, but will include a good one

Tuning:
Full Nistune with license and cables
type 4 board

Asking
enigne---1500 because of what is listed above
turbo kit---1200 shipped without nistune
nistune----500 shipped with cables and license to tune it with

OBO

wheelman167
07-04-2011, 02:11 AM
how much for just the manifold?

edwin23457
07-04-2011, 02:13 AM
how much for the turbo,fuel pump, and 550 inj.?

andyv316
07-04-2011, 10:14 AM
how much for just the manifold?

how much for the turbo,fuel pump, and 550 inj.?

rather not part out at the moment. but will keep you in mind

jesse_s13
07-04-2011, 10:30 AM
:ughug:Pics...

andyv316
07-04-2011, 03:44 PM
this is the only pic i have of the moment with everything installed
http://i715.photobucket.com/albums/ww153/andyv316/White%20240sx/032701_192300.jpg

Imarvin240
07-04-2011, 08:55 PM
is it an S13 or S14 ka?

wheelman167
07-04-2011, 10:58 PM
if you decide to part out i have cash in hand

andyv316
07-05-2011, 06:34 AM
is it an S13 or S14 ka?

s14, but thats a easy fix

andyv316
07-07-2011, 04:21 PM
nistune sold

JayCastle
07-08-2011, 03:37 PM
Ill take that turbo kit if you still have it in a few of weeks. I really hope that you do haha
Free bump

armiller91
07-10-2011, 09:20 AM
Hey have been trying to get ahold of you on NICOclub also. Interested in the Turbo kit. Have money right now. PM me or email me [email protected] Thanks

andyv316
07-12-2011, 03:38 PM
turbo kit sold, please lock, im probably going to sell the engine local

twin240s
07-14-2011, 07:52 AM
how much for just the rebuilt head if it was for sale??? pm please